Thanks.

Hello. I dont remember if I got any error codes. However, it did not impact the function. They worked great. During the time I had them, there were no deterioation on the finish. I bought these on Aliexpress.

@@swedemake5571 thank you m8

Hello. I dont know. If you are going to test the Dim on bench you need to simulate signals via canbus

Well, I am the one married to her. 😉

@@swedemake5571Yes and I'm Sorry

Hello Sam. I bought it on a Swedish webpage.But search for Steinhof towbar and see if you can find it more locally.

Hello Felipe. I bought them on Aliexpress. Just search for 12 volt ptc heater and you will easely find them.

Hello Jon. It a shifter from a 2014-2016 v70/S60/S80

Just google a 2014 to see the final result

Hej Carl. Ja det gör det. Om du har P3 plattformen. Jag hade denna på min förra också, en -09.

@@swedemake5571 vart får man tag på nya spaken? har du art nummer Går ju att söka på skroten med art nummer

@@swedemake5571 Bara plug and play? eller behöver man uppdatera någon mjukvara? tänker främst på belysning i nya spaken och att man manuellt kan välja växlar om man petar spaken till höger

Du hittar dem på bildelsbasen. Har inget artilelnummer men sök på V70 2014-2016. Eller S60,S80

Nej, du behöver inte ny mjukvara. Det ska vara plug and play. Har en annan video på kanalen där jag byter på en -09 också.

Hello Mabs. Dont really remember but the hole I drilled to get the old rivets out was 5.5mm.

Hello. Yes they are really nice. Its connected like this: the diodes are about 3Volts. So a 560 Ohm resistor are in serie with each diode. And that the +side is connected to battery (with a fuse between). Then on the ground side, diodes minus is connected to the handle on the plus side. Here you use a diode in order to not get plus backwards. That diode used called 1N5401. When you pull the handle the habdle let current through the handle to the break lamp to ground. And by that you have a closed circuit. Its very easy. (You actually just use the break light ground to make this feature).cool. Be sure to measure that you dont get any increased current consumption of your scooter when the led is off).

​@@swedemake5571 Oh my god, thank you so much for the in-depth explanation. I cant believe you remembered all that after 4 years, let alone answered me. This will help me out so much you have no idea. This is also 100% a project I am going to do, thanks to you 😀

Glad I can help. Good luck and let me know how it goes.

Hello. It looks like they are out of stock. And I have read that another company have bought Swedesolutions. And that they dont follow the agreement in regards to support. So I dont know if they will be available

çok teşekkürler

Hello Karim. The automatic starter is a feature within the aftermarket alarm that I installed.

Hello. The 2 position lamps is T10. (W5W). If I remember correct, the tail light is P21 5w

Hello Larsen. There should be light on the top. You did not forget to connect the circuit board?

Mine dosen’t get any light, i connected wire on left side who is the only connector i saw on the gear knob. Something i missing maybe?🤔

Hmm. It might be that the flex wire is broken between circuit board and the Led:s. I have not heard that there would be a Gear lever that does not have light in the knob.

Okay. Like led in the gear knob itself?

Yes exactly

Hello. I have yet not done that.

Hello Jasper. No, I bought it from Aliexpress. They work great and have sustained the finish, not getting pale by the sun.

Hello. Yes it still works. Its not connected to internet. But I will try to make changes with the software to see if there are any issues

ok,thanks. do you also have any information that only the latest cfe device supports the function where you can see boost pressure and others on the screen, or does older models also support it?@@swedemake5571

Hello. I have used it for some time now and are very happy with it. I have improved the programming and when weather allows, I will install never hardware. Note, its not only a touch start button. You can also read battery voltage and turn on extra lights. If I am am able to with the new hardware, you will be able to have like oil pressure, turbo load and so on. Stay tuned, video will come in time.

Hello Frankie. Thanks for your positive feedback. 😊

Hello. I bought them from Aliexpress.

Hello Jeremy. Yes, it works on both geartronic and powershift. There is no software needed for this change. I had this same gear lever on my previous V70 with geartronic. Gear lever from S60/V70/S80 should be bolt on. If its a 2013 gear lever, the knob shows which position you are in. (Dont remember the deviation on PCB on that one). Merry Christmas.

Thanks for your reply! I was wondering, because I’ve never really seen anyone do this swap untill I found this. We drive a v40 too, its a manual but still has the new style lever wich is much nicer! Seeing this makes me want to go and find one to swap with. First I have a tft retrofit to do! Haha. Merry xmas to you too and thanks again!

agreed, these are way to dim.

Hej. Jag har inte kvar den bilen. Men det var inga problem vid besiktningen. (Har en S80 facelift med dynamiska blinkers och de fungerar finfint.

Hello. I never did a video for the blue LED in the cupholder. The wiring was already there from factory. I bought the LED from Aliexpress. Like 100pcs for 1$. And in serie, a 560 Ohm resistor on each LED. However, the light is very strong sp I would recommend a higher value on the resistor. Maybe in spring/summer if I will remove the mid console, I can do a video. I am super happy with the result. Easy to do.

@@swedemake5571 Thanks. Will wait to see the video.

Thanks Leo. Yes I would not have a chance in gymnastics in the olympics. 😂😂

Hej. Jag vet inte om det är likadant. Men jag skulle nog prova. Se till att det är varmt ute så inte plasten spricker av kylan.

Thanks.

Hello. Yes its TF80SC. Mine was a V70 2009. There should be no problem with fitting the newer gear lever. I very much dont regret the change. 😊

Thanks. 😊

Hello Pawel. Sorry for late reply, just came back from abroad. I have the V-297 model too. Yes the manual instructs what you say, but without amy refitting of the bumper beam I could just put it back. (It feels more safe to put it back as a part of the impact zone if rear ended, protecting you slightly more from whiplash injury).

Hello June. Yes I know. I will do a more detailed version. On the torch lighr version I have a solder iron is needed.

Hello. I will check

Hello. Do you mean where the sensor is located?

Hej Jegern. Det stämmer. Man behövde inte alls gå in bakom stereon för någonting.

Så bara för att vara säker nu innan jag klipper i kablaget så klippte du original kabel och sedan tog ena änden till dsp in och sedan andra till dsp ut? Ursäkta om jag ä upprepande men vill vara säker innan jag klipper..😅

@@jagern2880 Det är bättre att fråga en gång extra 😊. Jag klippte kablarna och satte DSP emellan. Se till att du har koll på in och utgång.

Hej igen! Den grön lila ifrån antennförstärkaren går den till ACC eller Remote på dsp? Kan man koppla in båda på den signalen?

@@jagern2880 Den kopplar du till remote. Jag antar att acc är om du inte har remote att tillgå.

Hello Laurent. Thats great to hear, thank you for the feedback.

Hello. Happened to me too. I took clear nail polish. But first tried to sandpaper to have a more smooth surface which did not work as material was fragile. So the right coating should be the best.

Hello Albert. There is just a built in super crappy amplifier built in. So the Puzu is connected to the built in. There is no preamp out.

Thanks for the reply! So how I understand the signal goes like this: radio-> stock amp-> puzu->speakers?

Well yes. But radio has built in 4*20 watt amplifier. Are you from USA? I think I saw somewhere that US only was delivered with 4*40 watt external amplifier minimun. The high performance. If so, I believe you would benefit the most with a amplifier and subwoofer. I have on my present Volvo S80 high performance which is way less crappy than what I had in my V70 which had Performance only. The price of Puzu has gone up like 100$ since I bought mine.

Det var ju tråkigt. Är inne på tredje bilen med min cfe. Fungerar bra. Däremot så är supporten totalt värdelös. Det var en funktion jag inte hade så jag programmerade en nyare årsmodell och det fungerar finfint. Kan vara värt att prova.

@@swedemake5571 Funktionerna i sig fungerade, men helt plötsligt kunde den t.ex bara fälla ut ena spegeln vid upplåsning. Då blev jag tvungen att rycka ur en säkring och fälla ut ena spegeln innan jag kunde åka någonstans.. Farthållaren kunde funka en resa ibland för att sen inte fungera på vägen hem osv... Tappade intresset helt så jag ska nog sälja vidare modulen bara