@gaahleristudio - Do you sell a fan cap for the .5mm needle for this airbrush?
@tchynerd15 күн бұрын
I had the lever guide fall out and I was worried that it would be a pain to resintall, thankfully you covered how to do it very well. Thank you!!
@gaahleristudio10 күн бұрын
I'm glad we could help you.
@niwamasayoshi11317 күн бұрын
I really wanna buy it ! ASAP would you sell this one in Japan, or PLS give us Japanbese being able to buy directly.... best!
@stephengrenot7039Ай бұрын
love your brushes they work great. Photos on their way.
@gonzalvezalvez6572Ай бұрын
I have the two, 02 and 03, and I do not recommend taking the golden middle part with the "help" of a pliers or wrench I tried with a wrench and it got damaged the piece is too soft for tools. You can remove it with the help of a cloth or a t shirt so you can have more grip. That is a design flaw, one of the few with the mobius, Gaahleri should make a tool just like the tool of the H&S infinity.
@gaahleristudioАй бұрын
We do not recommend unscrewing the gold component, but we will be introducing related accessories in the future. If your airbrush has any issues, we would be happy to provide a replacement.
@gonzalvezalvez6572Ай бұрын
@@gaahleristudio Hello good people from Gaahleri, I was not expecting an answer...I tried to get my hands on the Celestial Dragon edition but it was not possible because you don't send them to Portugal...I've bought my 3 units (GHAD39, Mobius 02/03) on UK stores. I know for a fact that we are not supposed to unscrew the golden component (I've watched the videos), but during a paint session I've made a mess of my 02 mobius and there was paint everywhere so I had to disassemble it to clean it, it had paint on the trigger/valve and trigger adjustment spring and so I took a wrench (normal pliers are too aggressive) and took it out and by doing that the brass was marked and I was afraid that i had turned the gold part from a round section to an oval section which would make it very difficult to assemble it propperly, but after some time I was able to get it back on the threads and fasten it, it was harder than I had expected. Although I would love to get a replacement part, it was not your fault and therefore you don't have to send a replacement. They are wonderful tools, I was mesmerized looking at them, when I first received the GHAD39 my chin fell to the ground because I could not believe my eyes the quality is amazing, and believe me I am a "picky" guy and I inspect all my units with a magnifying glass so I can check the needles and other parts...they were perfect! I do own other brands (Thayer and Chandler, Iwata, H&S...) and until I bought a Gaahleri my benchmark was Harder und Steenbeck, and I must say Gaahleri has better finish. Once again thank you for your offer, thank you for the amazing airbrushes, keep on trailing the right path! Thank you very much, greetings from Matosinhos, Portugal.
@gaahleristudioАй бұрын
@@gonzalvezalvez6572 I am delighted to receive your response and thank you again for your support. Currently, if you purchase through our official website, we can now ship directly to Portugal. Thank you for your understanding. If your airbrush ever needs any assistance in the future, please feel free to contact me. I would be more than happy to provide any necessary parts. I hope our airbrushes will continue to be of great help to you.
@TheGrumpyOldModellerАй бұрын
I advised my friend to get one of these for his birthday and after getting it thought it to beautiful to use but after much leg pulling he’s now using it and absolutely loves it 😍😍😍 I’ve been on invalidity for a few years now but I’m saving as much as I can each month so I can purchase my own. Ever since seeing Barbatos Rex using his and saying how extraordinarily good and inventive it was ( the nozzle connection and airflow ) I’ve been on a mission to purchase my own as the old Chinese knock off airbrush I have is now causing me trouble. Hopefully in four or five months I will have saved enough money to purchase my own swallowtail airbrush as I’m extremely impressed by this particular airbrush and it’s wonderful features 🤓😎🤩 so thank you very much for building these beautiful airbrushes and I look forward to placing my order very soon 🤞🤞🤞😅👍👍👍👍👍👍
@gaahleristudioАй бұрын
Thank you very much for your support. We hope you can experience and enjoy using our airbrushes. We will have some great discount events at the end of the year, so please stay tuned.
@TheGrumpyOldModellerАй бұрын
Hopefully I’ll have saved enough by then 🙏🙏🙏
@DNModelsАй бұрын
This should be on sale for fans!
@baseballthird13Ай бұрын
the only problem...well was a really problem mostly a user error is that i didnt tighten the nozzle enough
@gaahleristudioАй бұрын
This is also something that can easily happen. Thank you for the tip.
@REKlausАй бұрын
I have 3 questions: 1. What is the blue masking tape you are using? 2. What primer and paint did you use? 3. What pressure do you use on the Swallowtail? Thanks you.
@gaahleristudioАй бұрын
DuPont tape Mr. Hobby primer and paint The pressure is set at 2.0 bar.
@REKlausАй бұрын
@@gaahleristudio Could you give me the part number on the DuPont tape? I can't seem to find it using Google.
@REKlausАй бұрын
@@gaahleristudio Thanks. Can you tell me what the part number on the tape is? I can't seem to find it using a google search.
@yamakawa511Ай бұрын
Nice work.Y
@markwakeley3835Ай бұрын
Some great tunes.
@olo398Ай бұрын
nice.
@SCSuperheavy114Ай бұрын
A great build! Would love to see more videos like this! Thanks!
@MJRLHobbyStuffАй бұрын
I haven’t watched this anime but this is a great build
@chogui-reacing5286Ай бұрын
Exelente explicación y exelente aerografo acavo de comprar un y me esta funcionando de maravilla comparado con otros este a sido el mejor solo tengo una oregunta donde podria conseguir refacciones si los nesesitara ? Gracias
@gaahleristudioАй бұрын
You can purchase all our accessories on our official website.
@chogui-reacing5286Ай бұрын
Felicidades acabo de adquirir el .03 y me pareció exelente e usado otros aerógrafos y de todos este a Sido el mejor lo recomendaré al 💯
@gaahleristudioАй бұрын
Thank you very much for your support. I hope to continue providing assistance to you.
@grahamrowberry33272 ай бұрын
hi thank you for all advice .Unfortunately on myGPMH 65 will not enter the body. I disassembled the brush again and tested the needle just into the body and it only enters about 4mm. help
@gaahleristudio2 ай бұрын
Could you please tell me how long you had been using it before this issue occurred? You can directly contact our customer service at [email protected], and we will help you resolve the problem you are facing.
@Dude_Slick2 ай бұрын
Wife ordered the Mobius 0.2 for me on Father's Day. I received a USPS tracking # even though I chose the UPS option. It said my order was ready, then I got an update saying they're getting it ready. The order summery even states UPS. Regardless, no one knows where the package is. Is Gaahleri known for bad shipping practices?
@gaahleristudio2 ай бұрын
Please provide me with your order number, and I will help you check the shipping status. Recently, we have been conducting a mid-year promotion, so the shipping progress is relatively slow. Thank you for your understanding. You can also directly contact [email protected], and our customer service team will assist you in expediting the shipping process. Thank you again for choosing Gaahleri.
@Dude_Slick2 ай бұрын
@@gaahleristudio Thanks for the response. I did reach out to support and it was resolved quickly.
@ginteacher81852 ай бұрын
The needle gets clogged very quickly at the front. What can I do about it? As if everything gathers there. I got mine today and i used a really thin acryl. Moments after that, the front is clogged and i have to detach all . Dont know, why its clogged so fast. Do you have any tipps? If i have the problem again, i really wanna make a video and send it to you.
@gaahleristudio2 ай бұрын
Could you please tell me exactly what type of paint you are using, at what ratio you are thinning it, and what your air pressure settings are? We will assist you in finding a solution to your problem.
@samlynch60052 ай бұрын
Can you do a disassemble video for the swallowtail
@gaahleristudio2 ай бұрын
No problem, we will make a new video as soon as possible. Regarding the issue with Swallowtail, you can also watch our previous Q&A video.
@janvanrenselaar59982 ай бұрын
Hi Gerald. I have a question. Can you show us what are the best places or thing to lubricate, and can i use a Spray lubricant like WD 40 for it?? Thanks in advance. And will surely use the summer sale the end of this month.
@gaahleristudio2 ай бұрын
Under normal circumstances, it is sufficient to apply lubricant to the bottom of the main lever as indicated in the airbrush manual.
@gunrunner352 ай бұрын
Thank you for providing this. It's good to have this a reference for the future. Keep up the good work.
@wingnutbert96852 ай бұрын
For orders to Canada: Where do you ship from? What's a rough estimate for receiving an order? Can I choose the carrier? (If from the US, USPS hands off to Canada Post. This is a much, much better method for Canadians!!! Shipping anything UPS is, in my personal and professional manufacturing experience, out of the question!!!!) Thanks very much! Looking forward to ordering once I know a few of these details.
@gaahleristudio2 ай бұрын
We ship from the United States to Canada, and currently, we do not have a USPS option available. However, we appreciate your suggestion and will strive to optimize our logistics options.
@wingnutbert96852 ай бұрын
@@gaahleristudio Thanks very much for the reply. If logistically possible, USPS option would be great. My point regarding them being best for shipping to Canada applies to other carriers like UPS as well. It's bad enough getting things into Canada as is, sometimes costing double the price! I'll pop back onto my still open cart page and get my order put through. Look forward to giving your airbrushes a try. Thanks!
@wingnutbert96852 ай бұрын
Great video! Nice to see clear, well shot close-ups of what you are talking about! *** Something that may be helpful to ad, is clarifying the term "Tightening". This is a relative term to the tool or situation. "Tighten" in the context of airbrush parts is not the same as "Tighten" when putting a nozzle on a garden hose or a nut on a 1" bolt, on a bulldozer!!! Very big and important distinction. An o-ring, crushed flat, is no longer a functioning o-ring, but more akin to a washer or gasket. And those don't come spec'd on an airbrush for a reason..... 😁👍
@gaahleristudio2 ай бұрын
I'm glad you liked our video, and thank you very much for your additional suggestions.
@olo3982 ай бұрын
Clean. time for new compressor tech!
@bobrivett76452 ай бұрын
I'm not into gundam or any kind of mech/robots, not into a lot things actually. But I do appreciate the assembly and customizing, decaling, etc. Of this scale model. Was wondering if builders of gundam models ever do alternative coloring/painting of their models or replicate battle damage, etc.? I just recently built a MIG-19 fighter aircraft with battle damage to a wing, side of the fuselage and some of the tail assembly. Only the cockpit, intake, exhaust and wheel wells have been painted. So the model isn't finished. Not by a long strech. I did this because I have two previous MIG-19 I've built and wanted the 3rd one to be different, not just with different markings. PS. I've been using a Gaalheria AB, almost a year now. Great air brush.
@olo3982 ай бұрын
yes, lots of gunpla builders use alternative colors to the suit through different storylines/upgrades/personal preference. Battle damage from bullet holes/beam saber marks/chipping/dust/rust/replicating 'famous' scenes in the animes are all used.
@gaahleristudio2 ай бұрын
We will use our different model products to create various types of models, and then we will try the battle-damaged repaint models you mentioned. Once again, thank you for your support, and we hope our airbrushes continue to assist you.
@SCSuperheavy1142 ай бұрын
Another great video! Is Gaahleri going to come out with a line of hobby tools?
@gaahleristudio2 ай бұрын
This is something we are considering doing. We will first introduce an airbrush accessory storage box.
@VincentDautel2 ай бұрын
Witch paint did you use please?
@MJRLHobbyStuff2 ай бұрын
Great stuff
@ELPADREAIRBRUSH2 ай бұрын
I’m having NOTHING BUT PROBLEMS ! with my mobius 0.2 ! I was doing a very crucial painting and the mobius 0.2 kept failing intermittent spray pattern and every time I’d clean it it would work for a little bit then I’d look and have tons of bubbles ! In the cup I cleaned the needle and nozzle with alcohol even put a new O ring seal on the nozzle and when I put fluid in the cup when I pressed down for air ! bubbles would form but when I pulled back for paint the bubbles would stop ! This airbrush costed me a client and a very intricate rendering was utterly ruined ! I had to start all over with my IWATA micron ! I expected high hopes for this airbrush I kept it exquisitely clean and it still failed was it the nozzle or the MAC valve ? I’m at my end of patience this airbrush promised something and failed miserably only after a few weeks of use ! I’m so disappointed so I’ve been using my Iwata and it hasn’t let me down EVER ! what is causing this malfunction in this airbrush so I can write a note to the company when I send it back !
@gaahleristudio2 ай бұрын
The problem you are experiencing is likely due to the nozzle cap not being tightened properly. You can try tightening it first before installing the needle, which should theoretically resolve the issue. For detailed guidance, you can refer to our QA video at the 1:00:10 mark, titled "Why are there bubbles in the fluid cup, and why is the spraying intermittent?" I apologize for the inconvenience this has caused. If you continue to encounter issues after trying this solution, please do not hesitate to contact our customer service, and we will provide you with a resolution.
@gaahleristudio2 ай бұрын
Thank you again for choosing Gaahleri. We hope our products meet your needs and help you create better artworks.
@DiasusCH2 ай бұрын
How heavy is it? I like the idea and design a lot but not sure how stable it would be against accidental knocking off.
@gaahleristudio2 ай бұрын
The weight is approximately 130g, and it should be stable against normal accidental knocks. You can rest assured.
@douglyle61062 ай бұрын
I have the Swallowtail with the fan cap. I'm very pleased with it and I have had no problems.
@christopherlarkin5903 ай бұрын
The .7 needle is a game changer for thick paints like Createx. I never had much luck thinning Createx but the .7 sprays this paint right out of the bottle with great results
@kristophermorgan23023 ай бұрын
Thank you for posting these types of videos. Glad to see the storage box is in the works. I will be getting one for sure. Have you given any consideration to a fan cap for the .07 needle set?
@gaahleristudio3 ай бұрын
Thank you very much for your support. We will speed up the launch of new products, hoping you can use our accessory storage box as soon as possible. Regarding the fan cap, our current fan caps are best suited for 0.5mm diameters. We will introduce larger size fan caps specifically for airbrushes in the future, so please stay tuned.
@kristophermorgan23023 ай бұрын
@@gaahleristudio thank you for the speedy reply.
@SlowFlyer853 ай бұрын
real good info I have had my swallowtail for 2mths now and use it on my rc planes models works great very combatable in the hand , shot many colors and different paints thru it very pleased with it good video and products this was one of the planes wreck and rebuilt and airbrushed kzfaq.info/get/bejne/n651ktN93cCcdn0.html 😊😊
@gaahleristudio3 ай бұрын
Thank you for your support, and we also love your aircraft works. We look forward to seeing more aircraft models made with our Swallowtail.
@SlowFlyer853 ай бұрын
@@gaahleristudio 😊👍👍
@vadimkorob26893 ай бұрын
Well...the airbrush isn't bad, but in my experience the fan cap doesn't work . I ordered the StudioG solely because of the fan cover - the cap itself has air leaks . After a week of checking and communicating with support, they sent me a new fan cap - same story. All other cap/nozzle sets work well (no leaks). Another week with customer service and they sent me a new airbrush BUT the problem is still with me - air leakage only with the FAN CUP. So I gave up and am willing to buy a Grex or Iwata with a fan cover.
@gaahleristudio3 ай бұрын
We understand the issue you’ve encountered, and we can provide you with new replacement parts. We also hope to assist you in resolving the problem.
@vadimkorob26893 ай бұрын
@@gaahleristudio Customer service already did everything that they can do (I have to admit that customer service is really great) but NOT new fan cap not even new airbrush didn’t resolve the issue. Probably it’s just badly engineered or manufactured fan cap itself bc everything works perfectly with regular caps
@wingnutbert96852 ай бұрын
@@vadimkorob2689 I've seen mentioned frequently, for many brands, people sometimes carefully put a bit of bees wax on the treads and that fixes leaks. Maybe worth a try as it's easy and cheap.
@vinnygallino52173 ай бұрын
We need to figure out how to identify needle and cap size with both having some sort of identifying marks and both would be amazing with the storage box
@gaahleristudio3 ай бұрын
Our storage box can accommodate needles, nozzles, and caps simultaneously. Stay tuned!
@wingnutbert96852 ай бұрын
A dab of nail polish, on the back end of the needle. Different colors for the diff. sizes. Wipe with Iso Alcohol first so it's clean. Make yourself a reference card so you don't forget! :)
@vinnygallino52173 ай бұрын
I love it I purchased 3 of them,best airbrush I've ever used!! I tell everyone,I had 6 other people I know personally purchase it,and prob a dozen more that I spoke to extensively about it! I have multiple airbrushes from Gaahleri and love all of them
@gaahleristudio3 ай бұрын
Thank you very much for your support; it’s the best motivation for us to keep striving.
@bobrivett76453 ай бұрын
Great video, love these Q & A videos, and their actual demonstration. Scale model building is solitary hobby, as well as painting with an air brush, typically. So when problems arise you only have yourself available to resolve the issue. This is why utube is such a great asset it can provide solutions to these problems, especially when they come from the manufacturer directly. I hope Gaalheria teams continues with this process of reaching out to us directly. Thank you.
@bobrivett76453 ай бұрын
Ps. I really like the idea of a storage box as well, especially if labeled. Ie: .28mm, .5mm, and so fourth.
@gaahleristudio3 ай бұрын
Thank you for your support. We will continue to communicate with our customers and inform everyone through videos. If you have any suggestions while using our products in the future, please feel free to tell our team at any time.
@animousworks3 ай бұрын
I love all my Gaahleri Airbrushes. I've really put them through the ringer, lol. A storage box would be awesome for sure.
@gaahleristudio3 ай бұрын
Thank you very much for your support.
@PercyJackson-rh1iu3 ай бұрын
The problem with your Airbrushes/Company is your products are cheaply made and come in a pretty box. When you unbox them they are utter trash, issues out of the box and a company that fails to acknowledge these issues and just sends you another broken airbrush if the first one is broken. The mass promotions online worked, you guys established yourselves as a "serious" company, but until you decide to actually fix your issues at the root of it all, your products will still be.... cheap Chinese trash. This is not a common issue with a good quality airbrush, this is a common issue with trash parts and cheap mass production ABs.
@gaahleristudio3 ай бұрын
Thank you very much for your feedback. We will continue to strive to improve our manufacturing processes and quality control standards, hoping to meet your expectations.
@janvanrenselaar59983 ай бұрын
OK maybe you are on something. But H&S just improved their Airbrushes this year after they maybe lost a amount of clients to Gaahleri. And that is just because 1 thing. The fixing process of a problem will take longer as you may think. You have to consider a few things: How much body,s the have in stock?? Maybe for a whole year production. ,They have to adapt,test,adapt,test etc irst a small amount of body,s,to complete them,send them to users wich are testing that improved A-B,s in the field. Take 2 months for it. Then they need to change ALL the body,s to those updates.Then brinmg them on the Market. Will take at least 4-6 months. Fixing a problem in a mass produced product like a A-B is not as easy as you may think. I use 2 now of the Gaahleri A-B the 38 and the first generation pistolgrip,and have no complaints at all. And i push everything that looks,smells and i liquid like a paint through it. From Diluted nailpolish with the cheap ~4,- a gallon thinner untill the expensive Zero Paint 2k Diamond clear through it. And have no complains.Maybe lucky me.But i have a ultra sonic cleaner. Every week my nozzle,needle,cup and cap are taking a bath from 12 minutes with some dishwasherliquid in it and WATER. Maintenance is key with these kinds of machinery or instruments. Thinking of buying at least 2 39,s and a swallowtail at the end of june. Then i can get dedicated A-B,s and have them always in perfect working order. For the money i will spend on those 3 A-B i cannot by a H&S Infinity 2 in 1 CR. And i am now on the age that i will not airbrush for another 25 or 30 years. Yes maybe quality is less than at the big brands. But not everybody has lets say ~350 ,- laying around for a A-B with compressor.
@erikaguilar37193 ай бұрын
What are you talking about? Maybe its a skill issue and you dont know to handle an airbrush. I have a swallow tile and I havent encountered any problems with it
@janvanrenselaar59983 ай бұрын
@@erikaguilar3719 There are many who are Brand lovers. Like when you have 2 identical sportshoes,but only the Nike is the best,no matter the price-tag. I got also very good results with the 2 i got. Sure buy more of them,because i dont got $250 laying around for a infinity 2 in 1 CR. Sorry but it is the thruth and i am not a proffesional airbrush user. I know a guy with a $650,-A.B who gets the same results as with a $4,- spraycan.
@wingnutbert96852 ай бұрын
It says something when you think a country has anything to do with the quality of a product. And most airbrushes are mass produced. Likely in whole or in part, in China. Even the most expensive units. Given your recent activation on YT, I wonder how old you are or if you aren't a troll from a competitor, as things you've stated don't line up with a dozens upon dozens of YT reviews of Gaahleri's products. Care to clarify your experience and credentials? Or be specific, rather than just meaningless generalizations and false assumptions? Perhaps make your first video for your YT channel and backup your claims? Thanks.
@steves.9223 ай бұрын
What about a fan cap made for the 0.7 needle?
@gaahleristudio3 ай бұрын
Thank you for the suggestion; this is an important direction we will consider for future development.
@markwakeley38353 ай бұрын
Thank you for a very interesting and informative video. I'm considering getting a Swallowtail airbrush for some scenery work coming up. It would definitely make painting 12 feet of sky so much easier.
@bobrivett76453 ай бұрын
Awsome
@gaahleristudio3 ай бұрын
I believe our Swallowtail will definitely meet your creative needs, and perhaps even better with the fancap accessory.
@WoodysScaleModelGarage3 ай бұрын
I have 7 Gaahleri brushes looking forward to my 8th
@gaahleristudio3 ай бұрын
Thank you very much for your strong support. We will also strive to launch new products, hoping that each airbrush will bring you joy.
@richardharmon18743 ай бұрын
Please indicate how to tell the various needle size of Gaahleri needs. Are the marked in some way to distinguish each needle size? Thanks Richard
@gaahleristudio3 ай бұрын
Thank you for your suggestion. We are also exploring ways to better distinguish between the different sizes of Gaahleri needles. We will soon introduce accessory storage boxes to address this issue. Once again, thank you for your support.
@wingnutbert96852 ай бұрын
A dab of nail polish, on the back end of the needle. Different colors for the diff. sizes. Wipe with Iso Alcohol first so it's clean. Make yourself a reference card so you don't forget! :)
@NukeForBinLaden243563 ай бұрын
Just in time. I bought one of these two days ago.
@marcpereira14383 ай бұрын
Keep up the amazing quality and work. Thank you for the Q&A videos, I believe this is what truly sets you apart with the dedication shown to provide the best air brushes ever.
@gaahleristudio3 ай бұрын
thank you for your support.
@SCSuperheavy1143 ай бұрын
I have a swallowtail and I must say it’s a great airbrush and use it for priming with 5mm needle. However; I would empathize proper cleaning after each use. Especially the the nozzle and nozzle cap area. Keep it clean and it will last a very long time! Great video as always!