Update, I installed my GF metering valve stickers that i purchased and they look great. Have one question. You mention on the video that you can secure the GF handles with a screw. What type of screw? I see where to drill a hole on the handle, but how do you secure it to the plastic body section? Are there any video links to see how it's done? I would like to secure my handle. Mine feels a little lose and I don't want to lose one while driving.
@angela996515 күн бұрын
My pavers were installed after I bought this house and sealed 3 different times. 1 after they were installed and then a few months after because it looked like crap and then again a few months after that because the sand washed out. Well it has all failed again and I am handy and could probably do it better myself. I have a couple questions. What kind of sand should I get in tampa fl and after I do the sand should I rent a compactor machine to run over it. Also if I use the wet sand method how long do the pavers need to dry. Pavers are mostly in screened in area around salt water pool. And pavers are concrete. Any tips and advice would be greatly appreciated
@MyPressureWashingBusiness19 күн бұрын
Thank you for your service! Great looking truck
@northjerseykevin40926 күн бұрын
Impressive,,,,really well done. I’ve been looking at trailers and skids. I’m a carpenter by trade and weld as a hobby. I really should be taking notes and building my own. Great content
@northjerseykevin40926 күн бұрын
Good luck to you. Thank you for your service. The truck looks great
@DavidWilliams-q2oАй бұрын
Like to fine out more, about purchasing a pressure washing truck from you,or a recommendation of a food company.
@properexteriorАй бұрын
We can definitely help you out shoot me a text at 904-999-8087
@nslamon310Ай бұрын
What are brand stripper are you using?
@properexteriorАй бұрын
Trident
@MVRC18Ай бұрын
Hey man, question.. I tried a half inch barb in where the ball valve was to replace the ball valve and have a better barb. Only problem is it doesn’t seem to fit where the ball valve was. What type of barb are you using for that? I have an older ar-45 model so I need to find the correct barb that will fit.
@properexteriorАй бұрын
Hey man, the barb size is going to be dependent on whatever output hose you are using to the hose reel. As far as the threads go, the piece that goes into that outlet manifold has the two green O-rings on it and then a female threaded portion. Typically those threads are quarter inch or 3/8 inch. Therefore, you would need to get an adapter that goes from 3/8 to half inch and then run your regular hose from there
@midlifemike4916Ай бұрын
Did you start losing pressure? If i introduce soap, my pump stops working.
@jarrodcannon2791Ай бұрын
I lose pressure when I turn the chlorine on
@properexteriorАй бұрын
Then there’s an issue with your plumbing on the soap line. Assuming everything else was followed in the video And the pump runs perfectly on water usage.
@midlifemike4916Ай бұрын
@@properexterior that's what we were thinking. Thanks for replying!
@properexteriorАй бұрын
@@midlifemike4916 Text me some pictures 904-999-8087 I’ll help you out
@josephdufresne2942Ай бұрын
Great video! Where can I buy the ar-45 (like in the video)?
@properexteriorАй бұрын
If you live near Jacksonville we can get you one local. Otherwise I would send you to north Georgia airless
@josephdufresne2942Ай бұрын
@@properexterior can it be shipped? I live in San Diego
@properexteriorАй бұрын
@@josephdufresne2942 North Georgia airless would be able to help you out with that if they are able to ship to California I prefer to only do local transactions when it comes to equipment like that
@josephdufresne2942Ай бұрын
@@properexterior understood! Thanks! Curious, is there anything I would mention to them regarding a set up like yours? Or does it come standard?
@sterlinghousewashpressurew9594Ай бұрын
You have my rheo knee on the logo, love it. We have to show these 2 good leggers how it done. 🦿👊
@ELEVOPRАй бұрын
Do you do pro bono work? I have a 23x11 for you 😂😂 Good Stuff Thanks for sharing.
@havalyounis149Ай бұрын
I am considering setting up a pressure washing trailer and would greatly appreciate any guidance or assistance you can provide. Your expertise online would be invaluable in helping me navigate the process. Thank you in advance for your time.
@akutan224bАй бұрын
Airborne All The Way! Bco 3/504 and HHC 1/504 1992-95
@user-wu4be5ve4hАй бұрын
Assuming you really liked the Kings reels best because you chose to use 8 on this build?
@properexteriorАй бұрын
Customer provided 4 manual reels and we matched it to make everything look good. On my channel I have an unboxing between the two brands. They’re identical, pretty much same price and perform the same. It all comes down to what your stores stock and what you can get your hands on. I have 6 reels on my truck and 4 of them are titan
@josegutierrez9113Ай бұрын
Wow nice video
@essentialmaintenanceservic4682Ай бұрын
Man! That's pure BEAST MODE!! 😮
@blueshieldpowerwashingfl2 ай бұрын
Thank you for your service dedication and love for our country
@SgtSnipey2 ай бұрын
Will there be a detailed walk though would love to see the full build?
@properexterior2 ай бұрын
There will be a DETAILED walk around video in the near future! We recorded one and the lighting / environment was not in our favor -_-....
@TScott-vp9zv2 ай бұрын
It’s so amazing how similar our paths are! Like you, I’m a veteran, I was an S&C coach, and now I’m in the PW industry! Much success to you on your journey! What an inspiration you are!
@properexterior2 ай бұрын
Thank you for your service #merica
@havalyounis1492 ай бұрын
Are you selling it?
@properexterior2 ай бұрын
So we built this one custom for a customer! But we are able to build and sell this trailer. Identical to this one would run around $48-52k depending on the amount of electric reels. 4 manual reels / 4 electric would be at $48. 8 Electric would be at $52. We can also add / remove anything you'd like!
@havalyounis1492 ай бұрын
Can we tie it in with the drone?
@havalyounis1492 ай бұрын
I want a pressure wash to attach a drone Do you have it ?
@properexterior2 ай бұрын
@@havalyounis149 yea you can tie It in with the drone for sure!
@properexterior2 ай бұрын
@@havalyounis149 we can definitely get you one setup!
@northjerseykevin39152 ай бұрын
I’m a carpenter by trade but have been eye balling a used 2013 F350 diesel with a aluminum flatbed and plow on it. I envision / fantasize about turning it into a soft wash truck. Thanks for your service 👍🇺🇸
@Flasoftwashprollc2 ай бұрын
😎🤙🏆🏆
@properexterior2 ай бұрын
If you’re up near jax, I can invite you to our local group ;)
@johnthe_don2 ай бұрын
Why does my ar 45 have a valve on the supply to reel and yours doesn’t? Im trying to install mine and that valve is in the way because i need that yellow hose to go upwards.
@properexterior2 ай бұрын
I got rid of it, it’s a major flow restriction and it’s not necessary for our industry. You can remove it! Then just get a 3/8” male pipe thread x 3/4 or 1/2” barb for your output hose to the reel! North Georgia airless also has these adapters in stock!
@johnthe_don2 ай бұрын
@@properexterior thank you brother 🙏🏻🙏🏻
@omarmontesdeoca16722 ай бұрын
Why do I think it's a good idea is better to bring a large tank than several small ones?
@properexterior2 ай бұрын
We are running 20 gallons per minute. On average with three different machines. Small tanks won’t keep up with what we are doing.
@omarmontesdeoca16722 ай бұрын
Regards How much is the gallon capacity of your water tank?
@properexterior2 ай бұрын
525
@ivorybailey52892 ай бұрын
Thank you for your service! As someone that’s new to the business, you’re an inspiration. I hope Austin can build my next rig.
@samgan17282 ай бұрын
This is such an impressive machine that I ever see. BTW, we really like the idea to use so many hose reels since we make similar ones and sell to US.
@properexterior2 ай бұрын
Thank you so much, this trailer is used on a specific job that requires stretching hoses a minimum of 300ft up and over a roof!
@crystalclearwindowsllc2 ай бұрын
May you always have alot of work to justify that much equipment
@properexterior2 ай бұрын
This customer has one contract that is triple the amount of the trailer. It’s a yearly contract!
@crystalclearwindowsllc2 ай бұрын
@@properexterior thats awesome
@michaelc72832 ай бұрын
That's a cool setup for a van.
@properexterior2 ай бұрын
Very minimal, but it definitely works. This build was a bigger headache than any other one I’ve done. Due to minimal room to move around and get things installed.
@michaelc72832 ай бұрын
@properexterior I bet it was, but now a lot of people who own vans can have a good idea on how to lay it out with the amount of space 👍.
@properexterior2 ай бұрын
@@michaelc7283 that’s the point of these videos, is to try and give people ideas of what can and can’t work! Stay tuned for one of the more recent builds, aluminum flatbed and 2 8gpms 😮💨
@JohannGambolputty223 ай бұрын
Thanks for this! Because of this video it made my decision easy to replace my asphalt driveway with asphalt. Only $60 a year to sealcoat that sh1t.
@properexterior3 ай бұрын
Yes, pavers do need regular maintenance! They're highly pushed as a "luxury" but require upkeep. This is a worst case scenario shown in the video! Not all paver projects are like this.
@elitewash5493 ай бұрын
Great video man!
@properexterior3 ай бұрын
Thank you
@chancepayne21913 ай бұрын
Where did you order the replacement from?
@properexterior3 ай бұрын
North Georgia Airless
@fredbear2nd3 ай бұрын
can you run gas soft wash metering valves without the remote on on/off switches?
@properexterior3 ай бұрын
Yes, you would just have to adjust manually. That’s not an issue at all
@jayvera44154 ай бұрын
What’s the strip material you use I’ve used the cobble strip from surface logic and haven’t had good luck with it still white haze marks after the cleaning.
@properexterior3 ай бұрын
Trident tidal wave gel!!! You may be experiencing a solvent based sealer, which is going to be brutal to remove
@joseperez10854 ай бұрын
Very nice
@CatfishLove4 ай бұрын
You are not getting 24 gal per minute out of those 2 pressure washers. The size hose you are using will not allow it. LOL
@properexterior4 ай бұрын
It’s 1/2” hose. Bucket test and a timer doesn’t lie.
@austinwilliams69075 ай бұрын
I like the ballvalve mount you have on the front of the reels, where did you find those?
@properexterior5 ай бұрын
So they’re basically just “broom” or “pole” clamps from Home Depot. Lowes sells them too I think they’re about $6 for two of them!
@properexterior5 ай бұрын
Home Depot sku: 568117 Correction, about $3.90 for two
@austinwilliams69075 ай бұрын
Thank you!@@properexterior
@DJGonzoNYC5 ай бұрын
I’m in Ponte vedra can I have your contact info ?
@properexterior5 ай бұрын
Proper exterior cleaning on Facebook 9043336000 [email protected] Thanks!
@prashanthmale49136 ай бұрын
How much does it cost for 560 sq ft - wet look pavers
@properexterior5 ай бұрын
Depends on multiple variables in order to achieve an accurate price. In our region we see from $1.50 to $1.85 for most “new install” not previously sealed pavers. Any job that has been previously sealed requires in person testing, examination and other necessary information before deciding if it’s something we want to take on and then at that point we can provide pricing. Typically those start at the higher $2.75 per square foot and go up from there. In some situations the pavers will have to be replaced. *highly uncommon*
@kevinprice79236 ай бұрын
What ball valve are you using? How can I build one/buy ty!!
@properexterior5 ай бұрын
Hydroseal 1/2” threaded ball valve with a 1/2” Mosmatic swivel. Amazon sells the ball valve. Kleen rite sells the swivel Let me know if you have any other questions!
@christopherdodson3236 ай бұрын
Why did you take off the factor outlet valve? Can you do this process with the factory one on? Thanks
@properexterior6 ай бұрын
It reduces flow quite a bit. I HIGHLY recommend removing it. It’s the same exact process, all you do is take the black plastic piece off and keep the valve open when priming.
@christopherdodson3236 ай бұрын
Can you show a quick video short of how you have it set up? Thanks
@christopherdodson3235 ай бұрын
What fitting replacements did you use on the pump going to the hose reel? I would like to do the same with removing that valve. Thanks
@properexterior5 ай бұрын
@@christopherdodson323 it’s a 3/8” mpt x 1/2” fpt fitting. Then a 1/2” mpt x 3/4” male barb with three-quarter inch hose
@christopherdodson3235 ай бұрын
@@properexterior and the top is just a 3/4 check valve to 3/4m x 3/4 barb?
@danielcwiok26316 ай бұрын
What pump is that?
@properexterior6 ай бұрын
Remco 1.0 gpm pump!
@RevitalizedExteriorServicesАй бұрын
@@properexteriorI actually just bought this pump when I was making my own sealer bucket lid and I’m having some issues with it not wanting to prime correctly. I know with some soft wash pumps there’s an Allen key slot where you can adjust the pressure but this one only has a screw. Does that screw at the head of the up pump adjust the pressure? I didn’t want to mess with it and break anything. Also what blue hose is that?
@properexteriorАй бұрын
@@RevitalizedExteriorServices so under that screw is the pressure switch screw. Thats just to hold the cover on. Also air compressor 1/4” hose. Cheap easy to replace and has crimped ends. As far as priming goes make sure the arrows pointing in the right direction. It should prime instantly
@RevitalizedExteriorServicesАй бұрын
@@properexteriorwhat exactly do you mean by crimped ends?? I’m not too mechanical savvy. I tried looking it up and got varying results. (Since I have left the original comment in pretty sure I figured it out I think it was a matter of wrong size tip and maybe some lackluster thread taping job…. What tip are you rocking? I’m using the chapin brass spray tip from my chapin xtreme 3.5gal industrial sprayer if you’ve ever messed with those works pretty good) Where from do you get that hose? I thought it looks good because it’s doesn’t look heavy and stiff looks very lightweight and malleable. Thank you, though I love the vids very informational and professional.
@brianb43906 ай бұрын
You have to do this every morning?
@properexterior6 ай бұрын
If you want accurate ratios, yes
@krispykleanpowerwashingllc16427 ай бұрын
When check valves go bad on a Ar45 what does the machine do. Mine has stopped pumping water
@properexterior7 ай бұрын
It will shake sporadically, not spray volume, low pressure. Your pressure gauge will also spike from 0 to 300 0 to 300 0 to 300 multiple times.
@adamejose64757 ай бұрын
Can you make a video on how to delete the gas tank off the small engine and connect it to the bigger tank
@properexterior7 ай бұрын
Yes it’s on the list of upcoming videos for this year!
@MikeyAR73736 ай бұрын
Just remove your gas tank and the fuel line running to the carburetor or to the fuel pump depending on what motor you have and then run a line from the big gas tank to your carburetor or your fuel pump.
@jasontenney27867 ай бұрын
In the process of building my trailer rig and did hrs of research and purchased the AR 45 great content just waiting on my remote rinse to come and can finish plumbing my AR question regarding the clips that hold the discharge and gauge do u ever experience them vibrating off and if so what did u do to stop it also i noticed u have a check valve on your bypass is it necessary like the comet p40 also my pump is the nrwer model it they did some changes the bypass is now a 3/4 barb not elbow the outlet is 1/2 barb poly no ball valve no drain plug on the bottom of outlet manifold and they got rid of yhe gauge i had to order the gauge separate thanks for the video
@properexterior7 ай бұрын
Hey there glad to hear, as far as the clips go I have never had an issue with them vibrating out. They are actually quite a pain to get out. As an extra precaution, you can take a zip tie and zip tie it to the manifold if you really feel it’s necessary. The check valve in the video is just a adapter for threads. As the regulator threads have stripped out for me with every other three-quarter inch fitting, I’ve tried to put on it. The check valve seems to fit on there perfectly and then gives you nice clean three-quarter inch threads to put your fittings on
@juniorbiel247 ай бұрын
How long do your pumps last because of the frequent maintenance?
@properexterior7 ай бұрын
I typically get 10 jobs out of the pump before I start losing count lol. But that’s based on the exact video. Pumps are $60 shipped
@apostlej20158 ай бұрын
Hydroseal Lol. Uh cheapskate nothing beats a plate compactor. Weak.