Ryan Stallings

Пікірлер

@jameshersom2536 Ай бұрын

Finally found the video. Saw my foreman make one of these as I’m new to tree work and we pulled whole trees over with this system. It was impressive.

@dkftn4882 Ай бұрын

Thankyou bang buat belajar persiapan individual skill persiapan seleksi tim ifrc🫶🏼

@TyShep06 Ай бұрын

Progress capture?

@dangerstall Ай бұрын

Is that a question or a criticism? As you can see there is a red prusik next to the first COD pulley. Unfortunately I never got around to attaching it in this video. It would go on the prusik minding side of the first COD pulley.

@amoledor 3 ай бұрын

What pulleys are you using?

@dangerstall 3 ай бұрын

Rock exotica Omni blocks

@dangerstall 3 ай бұрын

You are right. This is just demonstrating different uses for a specific device. In this scenario, there is no chest ascender

@trevethan82319841 3 ай бұрын

This seem more work then just useing a foot Ascender and a chest asender

@madeyoulook_abc 3 ай бұрын

Thats a 4 if you only have 4 ropes in the pully pull system, as the 5th line was outside the pully. Some expert.

@dangerstall 3 ай бұрын

I hope this is just supposed to be a funny troll job and you are not serious. If you are serious, learn the T method for determining mechanical advantage in pulley systems. Thank you

@thepatriotsrock2 3 ай бұрын

I wouldn't trust that nor myself

@jons858 4 ай бұрын

Nice job

@seabass3104 4 ай бұрын

Nothing says fully locked off like a good ol overhand knot.

@TheNfields260 4 ай бұрын

Awesome teaching!

@Northernutahtreecare 5 ай бұрын

You are the man!

@JonIsnbrg 5 ай бұрын

Can you tell me what sleeves you are using on the hose and where you got them. Thanks

@jstretch 6 ай бұрын

Can you make a playlist of your MA videos? I often watch them for reference as a beginner. Thank you!

@jstretch 6 ай бұрын

I could see using a recovery ring or smc type ring in place of the second carabiner depending on situation. If not pretied, you could do both couldn't you?

@dangerstall 6 ай бұрын

Yes, a ring could be placed there since you can pull the bight of the webbing through it.

@jstretch 6 ай бұрын

I am practicing this as I type.

@jstretch 6 ай бұрын

Ring in place

@justinmckay1456 6 ай бұрын

Great easy explanation. Thanks for the video.

@jonkeith2624 6 ай бұрын

Way to much gear am an arborist and I guarantee you I will beat you with the old ways 100 percent and it safer less to worry about and learn I bet you guys only use that stuff once in a blue moon and when you do you don’t climb that high I climb 50 plus feet multiple times a day no problem with the old time set up you guys should learn just cause it new don’t mean it better

@dangerstall 6 ай бұрын

Classic case of a guy not knowing who he is talking to. You are coming at me with some strong aggression dude. First of all, I never said this is the fastest way to ascend. This is a typical way to ascend in rope access and rope rescue professions. I also do tree work and I prefer to ascend with my Unicender, SAKA knee ascender, and foot ascender. A little Technique called rope walking. I guarantee it’s faster than the “old way” you are referring to. What do you do? Hip thrust on a Blake’s hitch? If you want another video featuring me ascending in trees, check out the official Rock Exotica Unicender KZfaq video. Have a good night.

@PhilipNation-xm5lh 4 ай бұрын

I'm about to deal with just his type of attitude with our volunteer dept. I get the classic, "we do things a little differently here" speech quite often. Usually, this means without regard for safety on the part of the rescuers. I respond with, "yeah, and I was only a paid, full time fire fighter at an ISO 1 dept for 32 years so we are going to do things my way." "This may or may not agree with you, but that's how we will conduct any technical rescue." Very nice demo! Techniques and equipment have come a long way in 40 years! @@dangerstall

@jbs-vu5mc 8 ай бұрын

What kind of pulleys are being used?

@dangerstall 8 ай бұрын

Rock exotica Omni blocks

@jasonmcmillan6598 8 ай бұрын

I love the butterfly as a follow thru! A great knot!

@DickRoethel 9 ай бұрын

Perfect video Perfect ratio IMHO ✌️❤️🏴‍☠️🇺🇸😎

@DickRoethel 9 ай бұрын

Love practical and simple ratios!

@user-jn1dh1di7l 11 ай бұрын

Omg!!! Thatis the sloppiness and least secure seat I have e er seen ties. I would never have you for my kids' climb in instructor. I was a C.O.P.E. director for the boy scouts and we did a whole lot better.

@dangerstall 11 ай бұрын

Omg!!! Your spelling is the sloppiest and least secure I have ever seen. Why are you attacking me you fucking prick. Say it to my face you fucking loser.

@dangerstall 11 ай бұрын

P.s. I subscribed to your channel. Can’t wait till you come out with some content for me to “learn from” and scrutinize. 🤣🤣🤣

@engchoontan8483 11 ай бұрын

Like = seat Repelling looks good on TV with seat and cigar

@markschriever1801 Жыл бұрын

Great Scott what a knot

@nathanwilson3185 Жыл бұрын

Thank you for a great explanation. I’m a rock climber interested in rope access and glacier travel. The 3:1 “just not cutting it” is something I worry about already

@motionsick Жыл бұрын

Dope. I just went backpacking and used a 3:1 paracord setup to pull dead branches off trees for firewood. Need to get a 9:1 setup now. 😅😅

@inspire8963 Жыл бұрын

Wow complex

@cmorr72 Жыл бұрын

Thank you for the video. I will share with my guys.

@waltweaver7297 Жыл бұрын

Your audio is terrible

@dangerstall Жыл бұрын

Cool

@Perrin-the-Fletcher 11 ай бұрын

Walt, why would you even bother leaving a comment saying that?

@justin22691 Жыл бұрын

Damn. Very dangerous simul-rappel. No friction hitch backup. No leash connecting you to your partner. The selfie stick really adds to the stupidity. Your also putting your friend in danger. No bueno

@dangerstall Жыл бұрын

You are 100% right. We could have made it much safer

@p34573 Жыл бұрын

If you had connected the figure of eight to the becket of the lower pulley and then connect the lower pulley directly to the load with a carabiner,would that still be considered and function as 5:1? PS. Thanks for making these videos. They have helped me understand considerably.

@dangerstall Жыл бұрын

Yes, if you connected the end of the rope to the becket of the traveling pulley, it would still be a 5:1

@user-nj7yh3rg3n Жыл бұрын

Сложна

@ragepotato9796 Жыл бұрын

The point of the prusik is to stop the load from dropping right?

@dangerstall Жыл бұрын

Depends on which prusik you are talking about. There is a progress capture prusik that goes on the change of direction pulley, and a rope grab prusik that goes on the traveling pulley. The progress capture prusik stops the load from dropping.

@JimT225 Жыл бұрын

Ryan, I believe we are on parallel paths: FD rope guy crossing over into tree work! Thanks for the vid, great explanation of rigging and operating techniques. Thanks again!

@onrope2085 Жыл бұрын

Why do you do a line ascent? Isn't it easier to place the Aztek near the descender and after passing the knot just release the Aztek?

@dangerstall Жыл бұрын

I don’t understand what you mean by “line ascent”? I’m also kind of confused by your second question. Once passing the knot through the clutch I released the AZTEK until the clutch had the load. Then I could take the AZTEK off the main line. Are you asking about passing the knot during a lower or a raise?

@thugnasty333 10 ай бұрын

Yes your right on rope

@andrewporter3149 10 ай бұрын

He is just checking to make sure the knot is through

@thugnasty333 10 ай бұрын

Danger stall is saying you don’t need to haul….just lower your load onto the 4’s.

@southern_merican Жыл бұрын

i only see a 6-1. shouldnt you add both 3-1 together instead of multiply?

@dangerstall Жыл бұрын

When you put a 3:1 onto a 3:1 it multiplies and becomes a 9:1.

@southern_merican Жыл бұрын

@@dangerstall ok. Its been awhile since i messed with anything more than truckers hitch and a few others

@southern_merican Жыл бұрын

This is the same as truckers hitch but with prusik and pulleys😁

@matthewschroeder1704 Жыл бұрын

He's got a thousand different ways to bail out and passes his PPE inspection but forgets his safety glasses

@TemplarX2 Жыл бұрын

That prusik is not necessary. Just create a figure of eight or butterfly loop and hock a carabiner.

@dangerstall Жыл бұрын

Correct. If you want to be less versatile and efficient

@alejandrososa646 Жыл бұрын

All these experts yet here they are looking for instructional videos... Dude, thanks for the video, I could already do 3:1 but this is just so much cleaner than mine!

@cjpirotelli8640 Жыл бұрын

Cool device! I'm a tree guy too, I know there are also ronins but have you seen the sala rollgliss? I think it is was designed as rock climbing rescue device. But it is a very similar system but more compact & can be powered by an electric drill. Slightly slower than this petrol option

@cjpirotelli8640 Жыл бұрын

Great Video! I have a question though.. what would the ratio be & what would happen if you made the 2nd redirection attached to a rope grab off the back of the progress capture pulley instead of the rigging plate?

@dangerstall Жыл бұрын

If I understand you correctly, I think it might make it a complex 11:1 . You would have to reset the pulleys so many times though.

@cjpirotelli8640 Жыл бұрын

@@dangerstall Thanks Ryan! Yeah I used it today, not ideal but only had 4 pulleys in gear bag. Luckily I only reset once. Thanks again, really cool channel. Looking forward to more videos