This doesn't work for 3rd gen 4Runners because of the fuel tank hard lines attached to the top of the fuel tank that cannot be accessed through this panel modification. Those hard lines have to be reached by hand in order to actually lift the fuel pump assembly out of the fuel tank.
@Ruliiss2 ай бұрын
Thanks for not gate keeping . your video still helping people 4years later just picked up a y33. going to changed water pump timing an all that before i slamm it !
@brandenmetcalf99442 ай бұрын
Bro that’s clean
@eprohoda2 ай бұрын
Kou- love it~ you made interesting ! catch you later!
@Iuta2 ай бұрын
still got the Q?
@kouchang53172 ай бұрын
No I don't, had to sell it . Wish I didn't
@Iuta2 ай бұрын
sick
@ivanvalencia52304 ай бұрын
what kind of bolts did the faces have? i want to rebuild my weds as well
@JustBoss8 ай бұрын
Hey man any updates on these? Just bought some curious if its worth it
@R2LY338 ай бұрын
What side skirts and rear valance is that?
@kevinmoney4847 Жыл бұрын
What year is this Q45
@kouchang5317 Жыл бұрын
2000
@MichaelDario Жыл бұрын
Has your Dads taco been regeared by chance?
@kouchang5317 Жыл бұрын
No it hasn't
@mywheels3414 Жыл бұрын
👍👍👍
@edisonmoten7385 Жыл бұрын
.nice car ...
@Gretathresh Жыл бұрын
That’s badass bro ❤
@aphid2314 Жыл бұрын
Sick build
@kouchang5317 Жыл бұрын
Thanks
@KanyeWestLover4500 Жыл бұрын
So clean bruh
@kouchang5317 Жыл бұрын
Thanks
@MrBrank1 Жыл бұрын
🔥🔥
@2JZ_WISCO Жыл бұрын
looks good man 😎
@kouchang5317 Жыл бұрын
Thanks
@jacyanbarksdale1948 Жыл бұрын
Love the progress!!
@kouchang5317 Жыл бұрын
Thanks
@joshualatham2138 Жыл бұрын
heat bro
@teamhmongthehunter7491 Жыл бұрын
Nice job brother thanks for the sharing. My truck have the same issues i about to replace.
@bobbygrey5859 Жыл бұрын
Great job I wish I'd watched this video first before I did mine now I have to fabricate a cover for my 4runner. Thanks good ideas
@jacyanbarksdale1948 Жыл бұрын
Lmkk if u still have this bumper I would love to buy and try to fix !!
@kouchang5317 Жыл бұрын
It broke so I trashed it already
@keyborb5440 Жыл бұрын
hey i have a quick question for you as theres not alot of info out there, im looking to redo my suspension and i dont wanna go full s14 just yet, but i wanted to know if s14 front hubs would work on a set of q45 coilovers? they look identical but i figured sense youve actually done the swap you might know.
@kouchang5317 Жыл бұрын
That I don't know for sure If they are interchangeable, they do look the same though but I don't if it'll work. I haven't tried that before
@rickconstant6106 Жыл бұрын
That style of inner CV joint is not designed to run at those extreme angles, so you may have problems with it, regardless of changing the boot.
@kouchang5317 Жыл бұрын
I haven't ran to any problems since I've changed them to these , I've been off-roading with these and it haven't rip or torn . Thanks for the info
@rickconstant6106 Жыл бұрын
@@kouchang5317 It wasn't the boot I was concerned about, it was the actual tri-axial coupling. They work best when the angle is at a minimum, which is why they don't usually use that type on the outer joint, which has to cope with the steering movement, so running it at an increased angle could cause additional stresses/wear in the joint. I hope you don't have any problems.
@defectahz6399 Жыл бұрын
Hello! Can you possibly send me pictures of how you raised the front bumper?
@kouchang5317 Жыл бұрын
I would like to but I can't, this is my brother in laws car and I don't see him that much
@beatlerosecrans2240 Жыл бұрын
Super helpful. The part about saving that old flange is the most important piece of info!
@kouchang5317 Жыл бұрын
Thanks, I'm glad the info helped.
@jchcameron Жыл бұрын
How many hours did it take you?
@kouchang5317 Жыл бұрын
I think about 3 hrs, took me that long cause I didn't want to take the outer tie rod out then decided to take it off to make it easier
@hv4285 Жыл бұрын
hows it going so far? OEM boot on my '99 ripped so I just did the "boot stretch modification". I considered his option as well but it was a little pricey
@kouchang5317 Жыл бұрын
So far so good . Has not rip
@alinuzri6625 Жыл бұрын
We.lover..motor..ruckus..custom
@danher3797 Жыл бұрын
Just picked up a q45 after watching all your videos. Need help finding parts
@kouchang5317 Жыл бұрын
Nice. Well, it's kinda hard and expensive to find parts for these cars lol, but if you are planning on doing 240 suspension swap, the s14 and s13 will fit but the s14 rears are longer then Q45. I got most my parts from Parts Shop Max
@danher3797 Жыл бұрын
@@kouchang5317 keep those videos coming. You deserve more subs your content is on point.
@kouchang5317 Жыл бұрын
@@danher3797 thanks man, I will post more videos
@danher3797 Жыл бұрын
@@kouchang5317 can you make a repair video for the heater/ac blend door? I think this subject would be a popular one?
@kouchang5317 Жыл бұрын
@@danher3797 I will when mines don't work no more
@KillacamS13 Жыл бұрын
Hey man do you remember how much longer the pbm lca were compared to the stock y33 lca
@kouchang5317 Жыл бұрын
No I don't remember
@javierd4666 Жыл бұрын
Great progress love the wheel combo… Where you find the side skirts
@kouchang5317 Жыл бұрын
Thanks. I got the skirts off a GS300, my brother gave it to me. I don't know what the kit is called to
@andrewplantagenet5811 Жыл бұрын
Love it! Great whip! Hope you have many more good miles ahead!
@kouchang5317 Жыл бұрын
Thanks
@CBXweb Жыл бұрын
KZfaq recommended this and I'm glad they did. Subscribed!
@jglassman11222 жыл бұрын
I was thinking about getting these wheels for my Tacoma because they are 5 to 6 pounds lighter than the factory rims I’m hoping it will help with the economy and power I’m curious on your thoughts. I’m not sure what offset to go with I want the stance to remain the same as factory
@kouchang53172 жыл бұрын
Well, from what I think is if you still want to save gas, you'll have to run factory tires or 1 size up sound be fine. I'm not sure on what offset will be good with a taco but these that I have sticks in the fenders so I put 1.5in spacers to poke it out , mines are 0 offset I think
@jglassman11222 жыл бұрын
@@kouchang5317 thanks for the info.
@4bvenom7332 жыл бұрын
How long does tge oe cv boot last until you can replace to a high angle cv
@kouchang53172 жыл бұрын
It's different on every 4runner, some probably last a longer, some maybe a couple months . Mines last at least 1-2 months depending on how much I drive
@4bvenom7332 жыл бұрын
I got a 5th gen 4runner and decided to go with 3.5 front to level my 2 inch in the rear now Im getting the high angle axle almost look like your. I think your axle angle is worst than mine.
@kouchang53172 жыл бұрын
@@4bvenom733nice, yea mines is bad
@customer75752 жыл бұрын
I got my boot yesterday. Trying to pump myself up. I’m repairing a boot on a new cv axle from last year. Before that, my replacement boot ripped. So I’ll take a few weeks fixing my axle since I like doing a step each, day so I won’t lose my sanity and I’m not as young as I use to be. Also, I know it’s been 2 years but your driver’s side boot needs to be stretched and not all cramped up and rubbing. Just notice it, maybe you fixed it already. Wish me luck.
@customer75752 жыл бұрын
I feel your pain. I’m waiting for my high angle boot and hoping I can make it work on a recently new cv axle that was purchased late last year. Trying to get in the right mindset because I’m frustrated with doing a boot replacement repair. Can’t wait to get this crap over with. Thx for posting. I actually have the same high angle boot on my passenger side but there is no room on my driver’s side but I’m hoping it works anyway on my lifted Rogue.
@FENIX0916-2 жыл бұрын
Damn that looks nice 👌
@Baptismals2 жыл бұрын
What size lift?
@kouchang53172 жыл бұрын
2in body lift
@Baptismals2 жыл бұрын
@@kouchang5317 nice, i just ordered the fat pat 1.5” BL for my 3rd gen as well, im guessing half an inch difference isn’t much so im guessing it’ll probably look similar to yours after it’s done? What size tires? Im running 265/70R17
@kouchang53172 жыл бұрын
@@Baptismals nice, I'm not sure about tire size. This is my bro in laws runner , I dono what size he has
@cartermathis1612 жыл бұрын
Hey do u have any info on raising the engine on the q45/y33. Need help pls😎
@kouchang53172 жыл бұрын
No I don't, I haven't even done it on mines or research into it yet
@jdmDC2ftw2 жыл бұрын
Does 3rd gen 4runners and 1st gen taccomas share front cv axels?
@kouchang53172 жыл бұрын
Yes they do, from what I know and search . I'm using a 1 gen taco axle but I'm using the ones with front lockers
@madnigerian2 жыл бұрын
Do u have any specs on this. I want to swap the one on my xterra
@kouchang53172 жыл бұрын
the mounting flanges is about 3.5″ and 1″. This boot is about 5.5″ long
@madnigerian2 жыл бұрын
@@kouchang5317 thank u man
@danremington89102 жыл бұрын
Does he want to sell that cap? Lol
@jayy_damenace74212 жыл бұрын
Hey bro think this is the same for a 2001-2005?
@kouchang53172 жыл бұрын
For those years I don't know
@yazming17202 жыл бұрын
Did you notice any difference in the sensitivity of the brake pedal? If you don't mind telling me how much you paid for the calipers. Also do you need the brake pad bracket or can you use the old one or did it come all together calipers & brackets? Great Video Keep Up The Great Work 👍 Yazmin Venice Beach CA ⛱️ ⛱️ ⛱️ ⛱️ ⛱️ ⛱️ ⛱️ ⛱️
@kouchang53172 жыл бұрын
Yes , the sensitivity you'll notice it but the braking power is better then the stocks . I got mines from the junk yard and cleaned it up with new seals. It should bolt right on to your stocks
@cssgss76562 жыл бұрын
In this video what did u hav just coilovers that’s it? Before u did the s14 swap and how much of a difference did it make ? What wheel size are u running here and then on the s14 swap?
@kouchang53172 жыл бұрын
Yes, just coilovers . The difference it made was more low and more camber with the s14 parts. In the video, the wheel size is 18s , forgot the width of it but now I'm still running 18s but wider , I have 18x11.5 rears and 18x10 fronts