Your video instructions were great. My coils were frozen up pretty bad. Defrosted them and the fan worked fine. Hopefully that fixed it.

Thank you

Can this be done on ge profile NO WATER/ICE ON OUTSIDE DOOR??? Thanks! Pgh pa

Hi. Thank you for your video.I have a washer exactly like your video. It was totally dead. I changed the motherboard. I just got the sound on /off abd light inside the drum but not display control. Do you think i have to buy the display control? What is it the number part.? Thanks

This was such a huge help! I hope this is monetized bc it’s awesome! Thank you. 😊😊😊

Thank you for your video it help me save a lot of money that I didn't have to spend on a expensive repair the Thermistor replace was on point

Unfortunately, I had to change the display board. This is the second time for this machine. However, because of your video, I was able to change this one on my own.

Really great video! Thank you for linking the cold water valve because that's exactly what I needed!

@onlineappliancetech did you order main control board part # EBR85130517? do you know if part # EBR31002611 would work? it has been difficult to obtain part # EBR85130517 and all I see available as a "placement" is part # EBR31002611. Thoughts? By the way I have the same dryer as you, model # DLE7300WE.

There is no need to remove the main drawer. Too much unnecessary work. Just remove the upper tray and get the ice maker out.

how do you know if that is the problem? I have water leaking when filling and it seems to be coming from the side underneath.

Thank you very much for the clear and succinct demo. My LG fridge had the same issue described in your video and I fixed it by following your instructions step by step. It was shocking to see how clogged the tube is. And even after removing the tube the accumulated water didn’t drain until I used a long brush to poke from the bottom of the drain pathway. There was also a lot of water and gunk in the bottom drain pan, which unfortunately can’t be removed to clean

So what was actually wrong with the wash plate?

How do you get this unit out of demo mode

Cabrio model WTW7000DW1 did not finish the spent cycle and won’t get into diagnostic mode. Nothing happens when press the normal, quick and cold button 3 times in less than 10-15 seconds. Is dead. Can you help?

Thanks for the video. I think I have the same issue. The Amazon link is broken. FYI.

Great video on especially how to take unit apart and put back on correctly with no left over screws, took your advice and was patient at times, was able to replace belt, pulley and 5 wheels on my model WED8000DW4, one of my mistakes was ordering a kit that said would fit my model, the kit came with belt that few inches short and a little wider, and vame with 4 wheels instead of 5, went to whirlpool dealer and for my model it was belt specific, so got a belt and extra wheel, after putting all back together ended up with 4 extra screws, rewatched your video and I had forgot to put the 4 screws on the front face of the housing that supports front rollers, other than that your video was excellent. Thank you...

This is a very good video. Impressive.

Chalk up another win for the aluminum foil fix! I just ran into one of these yesterday and was excited to try this procedure. I still can't believe it, but it really truly works!! I can't thank you enough for sharing this info with us. This is really an awesome fix, genius solution. Thank you!!!!

Thanks for a clear comprehensive video. Never realized how simple dryers are. You saved me alot of money. Thanks again.

My man. You just saved me some serious money. Same issue, my son and I followed your steps exactly, mission accomplished and we are back in business running a load in the wash. Much appreciated!! -Brent

Thank you very much!

If we order the motor from the link does the fan come with it as well?

How do I get out of test code?

Thhis video was very helpful. Unfotunately after putting it back together the display panel has nothing, the water and ice do not dispense. the light in my fridge and freezer are working but I do not know if it is keeping it cool enough. the firsdt time i put it back together I think I was confused on soem of the wiring, but i fixed that problem and now it wont work. I replaced the dispenser, do I need a new panel now too?

Mine isn’t jammed at all, cycles when I hit the button, just no longer produces ice. LG sent me a new one and I’ve replaced it but don’t think that was what the problem is.

Thank you ! The lint filter had gotten super clogged to the point that it tripped this fuse. LG wanted $350 to fix it , I immediately canceled my appointment after doing these steps to fix and cleaning out the visible lint from inside.

What happens when you clean it but after a week it still accumulates the ice

wonderfully helpful video!! was easy for me to follow instructions. Never done this before. my clog was exactly where yours was at the bottom of the white tube. Only question when I put the bottom of the white tube back in did it need to go in a certain way? put everything back together, ready to turn the refrigerator back on and hopefully no more leaks 🤞😁

You host saved me $300, this was so ridiculously easy, I really appreciate you taking the time to put this together.

When checking the hot water valve, check the inlet screen to make sure it does not have build up

I am not getting the 00 when I try to get to the test mode.

Out of warranty. Retailer delivered this one a year and one month ago.. now wants 20% of cost for new one just to come service. Old one was from the eighties always worked like a tank. I should not have let them take it when they delivered this one. Thanks for the video. LG = “ literal garbage”

My washer buttons had the foam square instead of the spring! I replace the foam for the power button with another button that I never use! Washer works like new!!!!!! Thank you for much for your video‼️‼️‼️‼️‼️Saved me sooooo much money!!!! Blessings!

Great video! I will be replacing my fan tomorrow

I don’t feel air flow at the top but there’s also ice build up behind the bottom drawer. Could it still be the fan?

I don’t have any error codes, and I can see the faint red sensor light, but my upper tray is completely covered in frost (and no ice being made). Any ideas what this issue might be and how I can troubleshoot? Thanks for the great vids!

مرحبا..تحياتي لك 👍 .هناك lg 7k بدون سنسر القاع فهل يكون الإصلاح لهذا الكود بالكارت ؟؟تحياتي لك رجاء الجواب👍❤️

mine stopped at 7 now reading SC, water still in drum

This fix works.. Thank you for a brilliant video..LG should be ashamed of themselves....

Besides any funny noises will there be any other indicators I did something wrong? Are there any fire hazards?

Hi, I tried the reset, but it did not fix my cooling problem. What can I try next? :)

An issue I'm running into is the dryer same model will turn on heat up but not spin

Searched several parts supply sites and there is no "inverter", just the capacitor and start relay or device.

Many Thanks!

Excellent! I found out mine was F9E1. Searched for a video on how to fix F9E1. Guess what, it was a broken wire on the pump. FWIW, the manual doesn't suggest that as a solution. KZfaq to the rescue again!

Anyone else find the compressor on this model to be noisy? I'm going crazy here. Noise started after owning for 2 years. My previous fix for when I reached my breaking point was unplugging the fridge, let it sit for 15-30 mins, then plug it back in. A repairman said I shouldn't do this because I could hurt electronics inside. With this video, I discovered I can get the compressor to quiet down for awhile by entering diagnostic mode, then exiting it. What a piece of garbage this new "technology" is. GE should publish the operational decibel rating on the Chinese parts they use and up sell us on special soundproofing or upgraded quieter compressors. NOISE LEVEL IS A FEATURE GE.

I cannot seem to pry that thing out of there!!! It comes out around1/4 inch buy I can't budge it beyond that. I've already chipped the bezel. What am I doing wrong???

Thanks for video, it helped get thru this LED light outage. It was the freezer one that was bad, the whole process with the help of your video took me all of 10 mins. This saved me at least $300 on a service call and parts. Thanks again!

Googled "LG water under drawer" and this video was the first hit. It perfectly described the problem and walked me through the solution. Problem was exactly as described (completely clogged evaporator hose under fridge.) 'Took a total of 45 minutes to fix, start to finish, including unloading the fridge and cleaning all the really nastry gunk that had collected on the drawers. Thank you so much!