I think I'd prefer 2 telecasters, each with different pup sets ❤

Thank you so much for making this video. It was a tremendous help! 🤘🏻

J hook the lead do when the solder joint comes loose it doesn’t cause damaging oscillation that will blow the amp apart

Exactly what this life-long drummer needed to know for his HB GT P90 that I got. Just because. I had to crank up the volume on your video and use CC. I'm vintage.

What do i do on my les paual that only has one wire, do I solder it to both or just the one

Tone +10

Are those 250k since its single coils????

No wonder shi breaks so easy thats how you connected them oh my god

Isr flix if you want professional results

Many of us would have preferred to use Dunlap strap locks.

I’ve heard of such a tone pot like that one and I love it

Great video, soothing music. Nice to see that you are using the same magnetic digital counter that I bought for winding my pickups as well!

Hooking the wire makes it easier to solder and makes a better mechanical connection and is no harder desoldering. It's not that hard to figure out.

何故、フロイド？

Thanks for making this! I'm currently modifying one of the wafers in an MN taper pot to make it no-load.

Amazing video, just bought a Harley Benton for peanuts with P90s, previous owner(s) bravely tweaked everything they could, especially the pole pieces. Having watched your I went through the things you mentioned and the guitar stepped into a different sonic level. Thanks. Subscribed! :)

Good tip for any type of electronics!

#20_🇺🇸

#56_Aug20_2024_PristineCameraViews_EarnsSubscription_🧐🇺🇸

Sometimes you can just bend that ground lug over and solder it right to the pot.

nice solder job unlike most youtube vids. but always use lead/tin solder not lead free. that stuff does not like vibrations, impact etc

Tip for you English Twatt ur making cold soder joints

Oh this happened to Pat Metheny 25 years ago. His tech fixed this way, with a chopstick.

3 sounds sparkly

Ive done this many times. I havent even glued or cut though. You can just break it off in their and it works. No saying its better, but it works

Just use a thicker screw

Hi, what temperature would you advise setting the soldering iron to? Thanks.

I love building guitars. I wind my own pick-ups and everything. I can't play guitar though but I find it cathartic then I give them to people wanting to learn guitar.

3 for the neck, 5 for the bridge

I’ve always wanted to learn about soldering pick ups and pots

I liked how clear the 5 was

Yep

Mediocre work ... Mechanical connection before solder. Should be ashamed to be giving "tips."

Everything that is behind an electric guitar that is always hidden and we never see it😊😊😊😊😊

Love a cold solder

Thank you so very much for this information. All of us out here in Guitarland are eternally grateful. I have a question about the effect of sound, or tone, when you flip the lead wires from hot to ground on a single coil. Does the direction of the wind, or rather, how the current flows in that wind, effect the resulting tone of the guitar? I would think not, but that's just my presupposition. Any thoughts on that?

I use Elmer glue wood glue and a toothpick break it even with the body and a longer screw and shaller strap Locks and never comes off.. Eddies Eye hook works even better...it is a old one but works

Nice and clean

64 sounds better to me…

Super informative 🥴

Those connections will probably be fine but they are not textbook joints when you just use a straight wire and solder. Need hooks

I dabble in electronics and soldering--I would love to someday make a guitar or do some work with guitar pedals. Great video.

Wow. Nice man.

...a holder for what?

You can just bend the last pot leg to touch casing ground and solder it. Even easier

Moon

A dowel and wood glue would hold stronger

Albino 3 But I think the 5 is cleaner. So it depends.

Sometimes imperfect wiring and messy joints make real tone..just a little food for thought.

Great and clean