The shoes become too heavy

If u take the insole out there's a little valve like a black dot where u can get a football pump and pump them back up... most nike air max have it if u check. It will save all the messing around

Did you have to seal the holes

mine have just popped, but 3 years out of them can't complain, I'm going to give this a try

This reminds me of the pair of Nike air-cushioned shoes I bought more than ten years ago. I only wore it for less than a month before the bottom cracked. When I returned the entire pair to Nike, they said it was caused by external force and refused to refund the money. I have stopped buying anything Nike related products since. I started buying Asics and some less popular brands like Brookes, New Balance, and even some long-established Chinese brands. I still have the shoes in question and use them as a reminder to me or others. I have kept this for a long time and thank you for giving me the opportunity to share my experience.

You know there a valve under the sole

Can you do it with plastic bags

You can mix water with dish liquid and spray it on the sole similar to finding the leak on a flat tire look for air bubbles when you apply pressure and that should help anyone find the precise leak location

Make a hole up front by the red pad for air to escape u are fighting air pressure

Saludos a todos desde Brasil. No recomiendo este procedimiento. Queda mal hecho y no dura nada. Lo mejor que hay que hacer es cambiar las suelas de tus tenis o zapatos usados. Se puede poner primero unas medias suelas de EVA, pegar y luego lijar. Después pegar unas suelas de latex antiderrapante. Y ya está ....hay muchos kilómetros más a caminar.

Hello how many tubes for 1 shoe cheers

Nome do produto?

Seriously, throw them to the rubish and purchase a new one. It s the best way...

Hey thanks if you read this comment, i just ordered a bag from orbit gear but its hold there by the aduan, asking for a tax id or something like this, can you give me info how to do? Please big thanks 😢

Looks good enought to try

The best way is buy a new one

Just do it. You talk too much

Mine exploded just walking

1.50 kg😂😂

Well done 👏

You need three holes , the one you pump the silicone from and two small holes in the end to leet the air out while you fill it , simple physics !!!! You will be able to do it in one go .

Not gonnna talk about they weight 3kg each after filling them up 🤣

I just fix my vapour max today I went out and bought the exact thing you have and it works perfect but I’m trying to stop the silicone from coming out like how do I stop that I tried glueing the spot where did the injection at the injection site but I guess within time.

Nike silicone max. you gave your shoes a kim k job.

Definitely giving this a go

Looks good mate , good idea thanks

Bisogna riempire tutta la gomma di silicone oppure solo la parte sgonfia?

I have a bunch of 720s, luckily none of them have deflated yet but if any of them do I'm going to get some black silicone lay it hot water and do this trick!

All you have to do is drill two relief holes absolutely tiny on the other side of the shoes. I've done this with my vaporMax. Basically there is no way for the air to escape. And adding glow in the dark silicone would be amazing!

I've been wanting to try this for YEARS. I have had dozens of pairs die prematurely from the 4 other versions of polyurethane midsole death but no popped bubbles. But I take comfort knowing that when i pop a bubble at least it's the problem with an actual solution.

how does this hold up long term , will the silicon not just eventually start oozing out again if it doesn't dry on the inside because of no air

I think you have to make 2 holes one in te front and one in the back, so the presure wil go out from the other hole?

E se dovesse rimanere aria dopo che il silicone si ė asciugato

Thanks for the great video, I tried it on an almost new pair of airmax that had been punctured by a drawing pin. It only worked!

I just did this yesterday and it has worked thank you so much I was going to bin them

Does it matter what silicone (brand?)

is that there a air refill hole under the insole?

Hi, bro I have a question about how I can know if my shoes are original or fake. My shoes is Nike air max 720

Just bought my first pair airmaxs and see this video right away so glad it didn't take much to find 😅 I'm going to try 🤞

China made Nike spend less on labor and materials than it cost you to fix defective shoes. Glad you support Nike. Made on slave labor. Nike can make anybody a shoemaker should have used an air pump with a tire patch. (adding 8 oz of silicon on 1 side and 2.5 on the other side is a science.)

Can you not just seal the puncture that caused the air leak? Existing air can no longer escape thus restoring to it's original state, theoretically. Unless the bubble holds compressed air originally. 🤔 But that would seem unlikely. If a puncture itself can be resealed, there would be no need to add the additional weight and mess of silicone.

Thinking of using expanding foam instead

Peter yes bud they do deserve a second chance ,red bull is over everything,I have a draw full of these brand . Thanks Ross

Peter I’m the same as you with trainers, there like a statement standout. Your true peter. Thanks Ross .avoid size and Footasylum. Footworld and tower London there so good peter. Thanks 🙏🏼 Ross

idk what to do with my pair of jordan 35, the zoom popped and its hard to put silicone in it. somebody know what to do?

Hello buddy ,I’m Ross and I’m a fan of 720 818s but I think you have made a really fabulous invention. I can’t get mine as good as yours but your right silicone feels better than the AIR. Thanks 🙏🏼 for sharing and saving my 818s thanks again Ross 👌👌🙏🏼

Anyone else have a pair of 720s not worn them for abit and now they are flat 😂😂

What did you use to fill the drill hole when the silicon was in the shoe

I got a size 11 but i generally wear a size 10.5, like you, I found that doubling up on soles helps a lot

You should’ve made at least 2 holes -avoiding the air compression that made it hard to inject more silicone. And another top is to use crystal silicone, it’s more transparent and looks like water when you use it. Putting the unopened silicone in hot water for 5 minutes would also make it flow a lot easier. 9/10 for effort though