Just to know: at 1:17 what's that big hole near "twenty-one" (exactly in front of the arrow) meant for?
@watchget1972Күн бұрын
these are rivets,for fixing the Dekoration Plate on the oscilating weight.
@fredericbontemps6569Күн бұрын
I apologize, I meant the big empty hole, not the rivet
@pigskinfanboy5 күн бұрын
That was an incredible restoration. Thank you for sharing this. I’m starting on restoring 2 different K&D sets this upcoming week. Hope mine turns out half as good as yours did.
@johnthompson185 күн бұрын
Did you do a re-assembly video?
@watchget19725 күн бұрын
is on my channel.just search for assembly of the miyota 8215
@johnthompson185 күн бұрын
@@watchget1972 I've got it thanks. Repaired my watch now, thankyou.
@SirYus997 күн бұрын
Looks good but the glass is too thick. Is it possible to change the glass?
@watchget19727 күн бұрын
yes, that should work
@RaczBela199316 күн бұрын
This movement works in my Berny V3-AM339MS Diver Watch. I love it, The lume is extreme, and the quality for the cheap price is top!
@Creationteaching21 күн бұрын
Thank you for the video, i followed you and took apart my own ST36!
@hihoney6378Ай бұрын
Great effort, thank you
@enricoaldy815Ай бұрын
Diameter strap bro?
@watchget1972Ай бұрын
26mm
@davielfingerstyle2457Ай бұрын
Is it possible for all Seiko?
@watchget1972Ай бұрын
Jes it is possible
@goodlifebdg2 ай бұрын
How to take crown out without disassembling ? No button to pin
@vickytahir13672 ай бұрын
Price and where to buy
@watchget19722 ай бұрын
On AliExpress. About 40€
@wangbow57552 ай бұрын
One hundred euros? I got the exact same ones of aliexpress for 15 pounds. Same sticker identical
@watchget19722 ай бұрын
Can you sent me the link where do you get buy this for 15 pounds?
@SeikoBuildModdingCustom2 ай бұрын
There are many mistakes made and missing several steps in installing parts, even though you have tried to return them to their original position and everything looks good. 
@luisolivetto89812 ай бұрын
I loved it, a sincere and educational video. Thankyour sir
@luisalejandroayalayanez94663 ай бұрын
Good afternoon, a question: How many revolutions do you make to the Seagull ST6 Gaviota machinery when it stops or runs out of power??? Because it is automatic and manual winding with an unscrewed crown which has no stop. I await your response please. Thank you and excuse me.
@watchget19723 ай бұрын
When the movement stops, I wind it until I feel resistance. After that, I don't turn it any further, otherwise there is a risk that the mechanism will be damaged
@hherreranqn3 ай бұрын
Excellent material. It has been very useful for me. Thank you very much!!
@rafaels19843 ай бұрын
Hello, in what position can i remove the stem? Widding or Setting position? Thank you
@watchget19723 ай бұрын
In winding Position.
@XJ2903 ай бұрын
Just got one of these as a step up practice movement from the ST36. Thanks for this video.
@curiousassortment3 ай бұрын
Very instructive video. My problem: the more I secure the screw, the slower the wheel turns, then stops. I have visually inspected it; the two feet under balance bridge are in place, the wheels at first are turning, so all seems right. I never screw it down overly tight, just enough. Wondering if you'd know why this would be happening. Thanks.
@girlracertracey65193 ай бұрын
Interesting, beautiful and quirky watch! Nice watch! Thank you for sharing. I also like the look of this homage watch very much..
@aTuttoLego4 ай бұрын
I cant understand the role of various wheel in watch with second at center. Can you help me with some usefull resource
@zinharun70664 ай бұрын
I buy 1set from chines ..same u bro.....i technisen watch
@GaryBray4 ай бұрын
Most informative. Thank you.
@mauriziodimattia5834 ай бұрын
E per Daytona Explorer e Datejust?
@Enoch-Gnosis4 ай бұрын
Will a 2836 replace a Miyota 8215?
@watchget19724 ай бұрын
Yes,why not
@Enoch-Gnosis4 ай бұрын
@@watchget1972 I’m in the process of swapping my 8215 Miyota for a ETA 2836 , I know I have to order new hands , new stem , movement holder and remove the dial feet on my Deepsea Asian Disl made for Miyota , my question , where can I place the dial dots on the eta 2836 movement once I remove the DAY wheel ?
@watchget19724 ай бұрын
@EthericZone Use Stick dots addhesive.this iş the best method
@macheginilarokanco4 ай бұрын
I can't get my stem back all the way in. How do i fix that?
@alllogosmemes57245 ай бұрын
This is the only video on the orange version, thank you I just bought this watch because of your video.😊
@macchi2055 ай бұрын
Hi where I can buy this movement ? Thanks
@watchget19725 ай бұрын
Look on AliExpress
@pedroleum25 ай бұрын
Hi - Love the video, thanks - What's the diameter of the smallest one
@alllogosmemes57245 ай бұрын
Do you find the red gmt hand hard to see with the orange dial? Is a nice looking watch! I ordered the black dial one, can't wait!!! Enjoy your watch!!!
@joefagan93355 ай бұрын
So open all the screws and turn the movement upside down and empty all the parts out 😀😀 Great video though. I actually learnt more than from several other video I watched and gained the confidence to disassemble my own ST36. Thank you 👏👏
@sukunaxgarou29265 ай бұрын
🔥🔥
@johnflynn61405 ай бұрын
I used to think these movements were ok, well then I found out just how bad their keyless works are and the crap date function that fails on them all the time, I have had 3 of them have major problems just in the last 3 months, well I won't use the movements or buy watches with them anymore, not when you can get a Japanese movements (NH34/NH35) that are a million times better for not much more money. still great video thanks for the video
@shehatamf6 ай бұрын
A very attractive watch. Do you find any difficulty reading this orange GMT handle in front of an orange bezel?
@watchget19726 ай бұрын
I will make a review video and tell you what the advantages and disadvantages of the watch are.
@zulu6ix2907 ай бұрын
Was the lume bad?
@watchget19727 ай бұрын
Yes,very Week.
@timecorner34217 ай бұрын
How much is cost. Thanks.
@watchget19727 ай бұрын
60€
@zinharun70664 ай бұрын
130 rm
@ziineziine35047 ай бұрын
Vous mettez quoi sur la visse de réglage ? De la graisse ?
@watchget19727 ай бұрын
C'est de la graisse Molykote DX, j'utilise cette graisse pour lubrifier les arbres d'enroulement
@ziineziine35047 ай бұрын
@@watchget1972 Ok merci 👍
@mtbbiker64017 ай бұрын
Hi. This looks like ST6 movement. Is this correct? Do you know if this movement has second hand hacking? I have a ST6 from 2003 that does not hack but some of the newer Benyar watches appear to use this ST6 movement but they hack. Do you know if hacking feature was added to ST6 movement? I want to replace my ST6 with hacking movement. Options are to replace with newer version ST6 or ST1612 or Miyota 8215 if hacking. Not all 8215 have hacking.
@DarthSpaceBall7 ай бұрын
Great review, thank you.
@nickjohnson2178 ай бұрын
That’s such a nice set to own, I’m looking out for a similar set too and I’d like to hopefully get a set that will be as nice as your set. Well done 👍🙏😉
@marshallkkk7198 ай бұрын
Can you please tell me how did you replace the crown I can’t find a way to get it out 😭 I have the same watch
@watchget19728 ай бұрын
You must put the stem in a pinvise Tool .than carefully Turn the crown counter clockwise.very carefully,otherwise you Broke the stem.
@KoryGatley8 ай бұрын
I wasted so much time because you didn't edit out the mistakes...
@watchget19728 ай бұрын
Practice makes perfect
@Tac2cool5568 ай бұрын
What was wrong with it?
@watchget19728 ай бұрын
nothing,just service it
@sanjivchahal8948 ай бұрын
I took out the stem on a breitling watch, it doesnt lock it properly.
@slammermx9 ай бұрын
You could tell the metal on metal parts had grease.
@jcmamcknight9 ай бұрын
Great demonstration.
@watchget19729 ай бұрын
Thanks
@user-tf6fl8gi5d9 ай бұрын
Nise
@eric1469999 ай бұрын
great video have 2813 model movement not winding and i took stem out not going back in properly any idea thanks
@watchget19729 ай бұрын
I think the yoke is outer place.you must make a keyles reset.it means disassemble the dial Side of the movement and keyless Work .than Assemble IT again.
@ferdauzs9 ай бұрын
Happened to me too. Took out the stem reinstalled and not winding😢
@ferdauzs9 ай бұрын
Any idea to make it winding again? Im using 3804
@watchget19729 ай бұрын
You must disassemble the dial Side and than the keyles Work disassemble and Re Assemble IT.
@johnnyjohnny72049 ай бұрын
i only buy divers now and have a few that need the bezel off to repair the click spring, etc, and was not aware the bergeon tool like this had less expensive versions being made by other manufacturers. while the broke screw is pretty bad (thanks for the warning) the tool still seemed to work very well and without damaging the steel case. i have purchased this exact tool on ebay for $55 incl shipping and look forward to using it after seeing your use of it successfully. i will be careful not to try and tighten any screws 😂 ...as a note, i actually purchased a bergeon ring (without the handle), just one, for about $160 ten years ago, and without the handle (it was made to use without a handle, though you could use it with a handle if one is purchased) it did not have the leverage to remove any of my bezels that fit it. so i look forward to getting this and will edit in how it works when it arrives.
@RafaelMuriloSilveira-bw2to10 ай бұрын
Great review my friend. Could you please share the link?