Bro... you do you, but you should know that the plug needs a dedicated outlet. It's a fire hazard otherwise. Also, I'd recommend insulating the tube with a sleeve of some kind. That tube gets hot. Just my 2cents. 😅 I have one of these too. Great units.

your video quality presentation is so amazing but do you know why your video is not getting the expected views? Your channel needs some updates to increase the view

Are you able to change the speed display from miles per hour to kilometers per hour?

Whether or not they hurt is exactly what I wanted to know. Thumbs up.

Just bought mine today 🎉

What’s the amperage????? I can’t find that anywhere!!!

Does it work on stones?

Thanks for the tutorial....however, for me, I'm having issues with the airbag sitting too close to the yoke that when I place the airbag back in as final step, it keeps pressing down on the horn. I've uninstalled and verified all the seatings and fittings but it still does it. I made sure no wire was in the way, and when the airbag sits in, there's hardly any gap between the airbag and the steering wheel. I've tried 3 different times with same result....what do you think the problem is?

To fast to see how anything was done

cool climbing wall i am trying to put one up any tips 😊

Im ordering a pair of them right now

Does it make your scalp oily?? Or causes hairfall??

Wow this dollhouse looks so cool❤

I just bought the u shappe version tonight

The video is too fast and makes it hard to understand

Ok awesome how do put it together

all you have to do is see how he sets it up and it as really easy . impossible to mess up. I put mine together after just seeing 2 seconds of how the first 3 pieces went together .

Hi All! Does anyone know if the temperature sensor should be behind or in front of the filter? I took out the filter to clean mine and now it’s not cool the room as much as it use to and I’m thinking that’s part of the reason. Thanks

Not working

What's the room size and outdoor temperature?

No need to use three stickies. Just use one at the white box. Then cleaning the window will be easier.

Could you please tell me how far does the model #MAW12HV1CWT 12000 btu smart inverter window ac extends inside? Not the overall depth. but the depth that would be inside the window from the side panels in. Looking to place in a kitchen window and need to know if it would fit in front of a sink faucet that may cause a clearance issue, as a contractor you may understand the situation. Thanks.

TOO EXPENSIVE I would find out the ingredients and make something homemade after the first jar I'm pretty sure its lovely though skin looking flawless

Link to ottoman?

I personally found the plastic hinges on the master canopy very fragile. Other models have metal hinges which are much stronger and better. Would not recommend the master canopy frame.

This was no help at all

Not sure if you know but the hydrapeak also comes with alternative caps. Mine came with the straw cap but also a cap that opened on two sides (hot and cold) which had a spout instead of the straw. This option made the bottle completely leakproof. It’s awesome for when you have to keep your bottle in your bag or purse if you cannot have it upright.

I have same one. All metal is good. Great inside diameters for water volume! BUT use something like Teflon tape or thread dope. Mine is permanently corroded on a brass hose end. Hard water here, hastens the process.

Still working good?

How do you get the zipper to completely close? I can only close mine about half way

That foundation is too dark for you, in my opinion. You would look more elegant with a lighter shade, esp with your hair color

I saw a review on amazon for these that stated Midea did a software update to these that you have to install through wifi that allows them to operate well below 40 degrees because it adds a defrost cycle. I have one ordered and am excited to get it, so im hoping that update is still effective.

Exactly.... did not show the spill difference.

38 cans with no ice or 22 cans with ice🤦🏾‍♂️ just asking...

who the hell fast forwards an assembly with no instruction or direction

Useless

Thank you. Using mine this weekend for first time.

So it would capture DE and not allow it to go into the filter membranes. I think a bypass would be needed when adding DE to the filter. Second option would be to drain the filter and add the mixed DE and water into the filter and start up.

I am watching this review with my Midea 5000 BTU window A/C on full speed!

Did you unplug 12v battery in your frunk?

Looks wasteful.

it's too loud...it's gotta be too loud!

I know they say non stick but I still use butter or oil in my pan just to purchase this set

Are the hot and cold water supply lines made of braided stainless steel or nylon?

We got it. Your husband is six feet tall and his third leg is about 1 inch''. We got it the moment he got out of that.

I have the same vacuume but mine shoots out large amounts of dust when it's turned on. Clouds up the whole house. I have changed out the filter and made sure it's not clogged. I dissected it, removed every screw and I'm still unable to stop the dust cloud it gives off the first 5 sec of use.

I have bought the 7k 2024 . It has said online it was self evaporating . After I set it up I noticed 2 drain plugs ! Why does it have draining when it's self evaporating. ? When do I have to drain it ? I'm not happy with having to drain .

Excuse me with due respect, bud five minutes does the job. Period. Period. If you don’t believe me talk to the other people that use ultrasonic five minutes as ideal. In most cases you got a bunch of crappy record you need 30 minutes and that doesn’t do the job they’re gone.

Hey guys, I’ve been doing this for years. Just use distilled water. And then towel dry the record not in a rack lay a fiber cloth down on a hard surface place your LP‘s flat out on that. Take another clean fiber cloth and wrap it around The disc and on A good percentage of your recent purchases last couple years only distilled water best option record Dr. vac and let that pull the water out and dry the record at the same time that is the perfect solution. It leaves the surface and I have a turntable and I don’t know if you know how much cartridges cost today they expensive and diamonds why they use diamonds because they’re strong and they could be cut you have a diamond last time and after you wash them a carbon brush each time you pull them out of the sleeve and put them on your Turn table one hint that works get some rice in sleeves. Have a great day guys and remember this is only a hobby. It’s not life and death.

Great info thanks 😊