Hi what do you suggest we fit the waterguard membrane to?
@ImpeyshowersOFFICIAL2 ай бұрын
Hi - Our Technical Team are on hand via the phone and email if you have any specific questions regarding the installation: [email protected] , 01460 256080
@adamburke41392 ай бұрын
Hi great video, i would like impey to do a video on how to seal round pipes for showers and taps mounted on the walls. How do you do it ? Is the floor membrane the same as the wall mebrane ? Cheers
@ImpeyshowersOFFICIAL2 ай бұрын
Hi We will look to create a quick video on how to get around pipes - keep an eye out for it. If you need advice soon, please contact our Technical Team: 01460 256080 who can help. Yes the membrane can be used for both wall and floor
@alimcgoo82552 ай бұрын
Will there be a follow up video showing the tanking installation and tiling?
@ImpeyshowersOFFICIAL2 ай бұрын
Hi - we have a seperate WaterGuard tanking membrane install video: kzfaq.info/get/bejne/bZOipcedqt2uZps.html Our Technical Team are on hand on phone and email if you have any specific questions regarding the next steps: [email protected] , 01460 256080
@shaundodson6043 ай бұрын
Great concept. Well done.
@janethollman78943 ай бұрын
How do the disabled manage the doors and the button at floor level.
@ImpeyshowersOFFICIAL3 ай бұрын
These half height carer screens are designed for someone to be showered by a carer and the buttons at the bottom are so they can be cleaned by a carer. The HHD design is so the end-user can operate the paddle (for opening and closing/locking down) very simply, requiring minimal upper body strength and can be operated from a chair or a shower stool. The doors can also be locked open to allow for a smooth side transfer without having to battle with a screen that wants to close on you. If you have any further queries, our Technical team are on hand via phone or email, who'd be happy to provide more information - 01460 256080 [email protected]
@Sirricardo64 ай бұрын
What is the treatment for all the wall protrusions (pipes, cabinet and toilet mountings, toilet and sink soil pipes etc)?
@ImpeyshowersOFFICIAL3 ай бұрын
Hi - any kind of additions or pipe entry points can be addressed with the joint tape as its a bit thinner and very easy to manipulate15/22mm holes can be drilled through it to create a pipe collar or if there is existing pipework a split can be used and slightly bunched upward with same method being used after with the main sheet but moving the split to a slightly different location and then finished with the jointing compound. the good thing about these materials is that the butyl backing stays supple and will reseal and cuts you have to put into it or if you have to drill through it (wall only). If you have any further queries, our Technical team are on hand via phone or email, who'd be happy to provide more information - 01460 256080 [email protected]
@gavinawalker8 ай бұрын
it seems the video is cut short?
@ImpeyshowersOFFICIAL7 ай бұрын
Thanks for flagging this and apologies for missing content. The missing voiceover and end of the video is: 'Make sure you get rid of all the gaps and work your way backwards. The finish on the screed that you're looking for is just so you can see the peaks of the coloured pieces grinning through.'
@learnprogress66189 ай бұрын
No videos of drain adjustment glueing , ?
@audioterapia297911 ай бұрын
Hey. Where can I find the installation guide? I bought one, but I dont even know what kind model is this. Thanks
@ImpeyshowersOFFICIAL3 ай бұрын
Hi there - please send an image into our Technical team who can help identify the model for you as well as supply the Installation Guide / Tech Spec - 01460 256080 - [email protected]
@CodSmashingPasty Жыл бұрын
Could you lay self-adhesive UFH mat over this then apply self leveling cement?
@ImpeyshowersOFFICIAL3 ай бұрын
Yes, UFH can be applied to this, a lot of the matt types have a certain amount of tack on them which will adhere to the matting, if you have to cut the back matting to turn the UFH you might have to use a slither of duct tape to hold the turned edge down but that sticks to the membrane as well. Cement based levellers are also compatible with this membrane but do be very careful not to fill in the pre-formed gradient on the former as it needs to maintain a 1:40 gradient. If you have any further queries, our Technical team are on hand via phone or email, who'd be happy to provide more information - 01460 256080 [email protected]
@manxblackcat1 Жыл бұрын
can this tray be used for none slip vinyl flooring
@ImpeyshowersOFFICIAL3 ай бұрын
Non-slip vinyl can be applied to these formers , they are specified in the UK above all other floor formers for accessible bathrooms by local councils and sheltered housing. Use a glue like an Altrofix 19 or similar as they spend most of their time under water, if you have been specified a water soluble glue to fix the vinyl try to use something else that is waterproof around the waste clamp as this is the cut edge that's exposed to water all the time. If you have any further queries, our Technical team are on hand via phone or email, who'd be happy to provide more information - 01460 256080 [email protected]
@CarlosFandandgo Жыл бұрын
I've just fitted my Impey Aqua deck, great product and easy to fit! I will be plaster boarding next (using Elements type board), and will then tank with the WaterGuard kit, including the whole floor area of 2.1 x 2.7m. However, I am also fitting the loose cable Prowarm ProGrid+ system as fitted by Roger here (kzfaq.info/get/bejne/aNWhqtykmN_He5c.html). For this you need to fit the matting down that the cable runs in and I was planning on running this into the shower area - is it OK to fix that matting down on top of the waterguard kit with kst, and then tile on top of the matting? The matting is 6mm so I would need to account for that, plus adhesive, plus tile when setting the drain grate. I did email your tech team a few weeks back with this question but haven't heard back from them.
@ImpeyshowersOFFICIAL Жыл бұрын
Hi @carlosfandandgo - thanks for your query. Please speak to our technical team about this via: [email protected] or call them on 01460 256 080 so we can ensure you get the best advice for the situation.
@JustMe-vq5hx Жыл бұрын
Can you use ditra matting insulation on top of this and the install the tiles?
@ImpeyshowersOFFICIAL Жыл бұрын
We are unable to answer this question without some more information. Please call or email our Technical Team and provide them with further details so we can ensure you get the best advice for the situation. 01460 256 080 or [email protected]
@donnad7740 Жыл бұрын
I’ve tried to do this and it’s like it’s jammed it won’t come off, any ideas?
@ImpeyshowersOFFICIAL Жыл бұрын
Hi, please give our Technical team a call or drop them a email and they will be able to support. If you're able to provide photos or video, that'd be very helpful to the team. 01460 256080 or [email protected] Thank you
@vahidehsaadi68 Жыл бұрын
gibts auch auf Deutsch sprache?
@nottingtohide2 жыл бұрын
Whoever did mine before I moved in did a piss poor job and a half. Laid down wooden flooring, got so soaked, was like walking on wet pillows, till it collapsed! A council contractor just started yesterday on mine removing the soaking wet wood pulp down to the concrete base. He's waiting on some screed & materials to arrive, hopefully tomorrow! When I plastered outside walls, I used plasterciser, thick latex liquid mixed in with the cement. Is plasterciser not used in wet rooms to help waterproof? Contractor told me screed would be dry in 2 hours. 2 hours?! really?! The surveyor said once concreted and dried, latex would be poured over to waterproof, though from the last time my kitchen floor was done, it took overnight to dry. Then, new blue vinyl will go on top of that, sealed around the edges. Drain is already in place with a 12 vdc pump. I was expecting a new drainage pump system. Think I would have preferred ceramic tiles to vinyl. Waited nearly a year now to get it completed! That's the caancill for ya!
@nottingtohide2 жыл бұрын
@@shaunshunt Lol.. am still waiting to find out myself. He never came back..!!! I put in an official complaint, making a claim for damages. Outrageous!! to leave my bathroom in such a state. He hadn't a clue what he was doing. I'd do it myself if they delivered the materials. I'm sick of wating. Ring them up, email them, nobody picks up a phone or answers their emails. WTF..?!!!
@spugggaldon3612 жыл бұрын
Do you not require a subfloor to be fitted for tiling?
@sandietozer34092 жыл бұрын
Can this go beneath mesh, tile glue and microcement?
@ImpeyshowersOFFICIAL2 жыл бұрын
Hi Sandie, please contact on 01460 256080 as they'll be able to support and advise you. Thank you
@SuperWayneyb2 жыл бұрын
🤘😎🤘 my go to these 👍👍
@RobBoFr2 жыл бұрын
Hey folks. Can we fit the aqua-mat underfloor heating with this beautiful tray? If so, I assume that the adjustment on the waste allows for the heat matting? Many thanks!
@ImpeyshowersOFFICIAL2 жыл бұрын
Yes, but before you commence please call our tech team on 01460 256080 👍
@deanmoxham88013 жыл бұрын
Jhkkkîļ1
@andreaarmstrong47013 жыл бұрын
How can I order one
@ImpeyshowersOFFICIAL3 жыл бұрын
Please call our Customer Service Team and they'll be able to advise you - 01460 256080
@habibisakhi24503 жыл бұрын
Where to find that part please? Thanks
@ImpeyshowersOFFICIAL3 жыл бұрын
Hi, please contact our Sales Team on 01460 256080
@TheBroadyBikers3 жыл бұрын
Just installed mine. Awesome bita kit. Tanking was abit faffy but worth the time and effort. Big thumbs up.
@stuartgunn53503 жыл бұрын
About 5 minutes in the way you’ve fixed down that floor is shocking 10 inches plus between screws, the narrow strip between tray and wall is definitely going to move, I wouldn’t be happy if this was installed in my house
@ImpeyshowersOFFICIAL3 жыл бұрын
Hi Stuart, please note that these are the pre-made holes for fixing down the dec and we have not encountered an issue with regards to the space between the screws holes. This floor former has been designed so that it is possible to make additional screw holes if needed anywhere on the dec except inside the eccentric drain plate. If doing this, you will just need to make sure to countersink them so the screws will sit flush in the dec. We hope this helps Thanks for watching
@stuartgunn53503 жыл бұрын
@@ImpeyshowersOFFICIAL I have complete faith in the tray I’m actually a big fan and intend on fitting one in my new house next year, I’m talking about how the flooring around the tray has been secured
@tomsmillie93483 жыл бұрын
anybody else see a face in the waste 3:20 👻😱
@miss76223 жыл бұрын
How do you remove please
@ImpeyshowersOFFICIAL3 жыл бұрын
hi, please give our tech team a call on 01460256080
@easternise3 жыл бұрын
Which rubber seals does this take? I would be grateful for link to purchase replacement seals.
@ImpeyshowersOFFICIAL3 жыл бұрын
The Elevate Half-Height Doors take a 1300mm seal. Please send an enquiry by completing the form and a member of our team will be in touch www.impeyshowers.com/contact/
@hypnoboutique4 жыл бұрын
This looks insanely over engineered
@ozzy85Mpower2 жыл бұрын
Is that not a good thing
@YUSKHAN4 жыл бұрын
My scumbag plumber hasn't installed this property the drain is higher than the tile so there is always a puddle round the drain
@dan20713 жыл бұрын
If you cut the drain out, there is an adjustable height collar underneath. You might need to remove some adhesive to do this.
@guineapigsx.x51544 жыл бұрын
What if the wall tiles are not being removed and your replacing a standard tray with an impey easy fit on concrete floor
@cglees4 жыл бұрын
Surely the screw holes and edges of the rotating drain cover will leak?
@ImpeyshowersOFFICIAL4 жыл бұрын
All wetrooms require a tanking membrane above the floor former . Without a membrane you would indeed have a leak. Our video on WaterGuard tanking explains the next process to follow. An essential element to ensure our lifetime guarantee is in place.
@cglees4 жыл бұрын
Thanks for the reply Impey, maybe attach a link to the next video in the description or at the end of this video. It hasn’t come up on my feed yet. Product looks nice though
@peterthompson67644 жыл бұрын
How much would it be
@peterthompson67644 жыл бұрын
How much would it be to fit
@ImpeyshowersOFFICIAL4 жыл бұрын
@@peterthompson6764 we'd recommend speaking to a local installer. they are not complicated to install however care needs to be taken when surveying where they are to be installed.
@tomkelly5004 жыл бұрын
Is there any need to do this on a ground floor concrete floor if I’m going to double layer micro cement and then seal for water?
@ImpeyshowersOFFICIAL4 жыл бұрын
We would advise a quick chat with the technical team. They’ll be online from 9am tomorrow. 01460256080
@inamhassan26943 жыл бұрын
If your still around tom...whats the answer to this question?
@tomkelly5002 жыл бұрын
@@inamhassan2694 sorry mate, ended up getting a pro in for that. not sure they did any tanking though, tbf.
@inamhassan26942 жыл бұрын
@@tomkelly500 ah ok. No worries. I appreciate your response matey. I think I will get mine tanked just to be on the safe side. Im getting told i don't need to but for the sake of not so much more in costs i reck its worth it in the long run.
@adrianmccormack21634 жыл бұрын
Omg
@MS456364 жыл бұрын
could you use this to damp proof a room?
@ImpeyshowersOFFICIAL4 жыл бұрын
Hi, this is not tested for such an application so we'd advise not to.
@guitartommo27944 жыл бұрын
Thanks. It would have been more useful to film you actually doing stuff rather than cutting to complete..e.g. fitting the corners for the tanking to show your method...they are really fiddly and sticky.
@dagantilley60154 жыл бұрын
the heat matt is a mess, why in the cupboard? basically the heat matt was too big for the room
@colinfairley51184 жыл бұрын
Wish this was around 10 years ago. What a great product! I have a leaky wet room and it is a nightmare!
@aldos27954 жыл бұрын
tiles hanging on a protective 1mm sticker?? Hmmmmm .....
@aTravellr5 жыл бұрын
can it hold larger tiles on the wall?
@ImpeyshowersOFFICIAL5 жыл бұрын
Yes, however it all depends on the tile + grout weight. Please call our technical team to get a definitive answer on wall loads before commencing > 01460 256080
@alexanderchuyko48895 жыл бұрын
and how to find this nice set, please?
@a4drk5 жыл бұрын
Can you tile straight onto the top of this ?
@Daniel_Adam6 жыл бұрын
If only this training was done at Old Trafford 😕
@ImpeyshowersOFFICIAL6 жыл бұрын
The 2018 dates are now online : www.impeyshowers.com/training.aspx
@Daniel_Adam6 жыл бұрын
Impey Showers Ltd I see the dates but I don't see Old Trafford 😕
@ImpeyshowersOFFICIAL6 жыл бұрын
No plans to head to Old Trafford this year. Sorry
@ImpeyshowersOFFICIAL5 жыл бұрын
it is this year.. 20 November- www.impeyshowers.com/resources/wet-room-installer-training/