This video has helped over a hundred people fix their shifter and you are the only comment saying otherwise. Use common sense, try removing the shifter knob again and see if something like a piece of plastic is stuck or loose inside there. Maybe you just didn’t slide the shifter knob all the way down? Also It’s fully fixed before the video ends I just forgot to reinstall the pin. Anyway, hope this video was helpful

Make sure nothing is in the way of the large button that is located on the gear shifter knob that you press when shifting gears Worst case scenario remove the gear shifter knob completely and just press on the shifter shaft to switch gears

just curious on why my gear shift wouldnt go into park as i was about to take to mechanic to replace the shifter cable then came across your video. so if i replace the gear shift knob it should be fine from there ?

Hey sorry for the late reply. I am not exactly sure but I feel like a plastic part just breaks off of the gear shifter assembly and gets stuck somewhere in between preventing the shifter from going into Park

You are welcome

Glad it helped!

I took out the overdrive button but the shifter still doesnt work like at the end of the video.It shifts fine though without the shifter handle.Maybe the large button in the handle is broken or worn out also?

@@davep5647 I think it may be worn out as you said it. Mine wouldn’t shift as well but my overdrive button was apparently broken and plastic particles were blocking the entire shifter from operating. Try putting the entire handle back on (w/o the overdrive button but leave the large button in place), then push the handle down towards the floor and try moving the selector up and down through gears. If that doesn’t work, try removing the large button if possible. If neither work, I would suggest looking for a used gear knob and replacing the entire gear handle.