Ай бұрын
2 ай бұрын
2 ай бұрын
2 ай бұрын
2 ай бұрын
2 ай бұрын
2 ай бұрын
2 ай бұрын
2 ай бұрын
2 ай бұрын
2 ай бұрын
Жыл бұрын
Пікірлер
@LawfulNerdy 2 күн бұрын
For some reason today my port forwarding stopped working. I have the cox wifi panoramic app and found everything you are showing. However, there are three numbers showing up on my game server, a server port, peer port and query port. Do I put all three port numbers in or ?
@Budl1te 2 күн бұрын
@@LawfulNerdy try it. Might google it for your game box to be sure.
@jasonbirch1182 6 күн бұрын
Thanks! Hopefully thats the issue in mine! It does the same thing 🤞
@jennbradshaw2733 6 күн бұрын
Thank you! Just figured out my problem was the fuse.
@q.d.9802 14 күн бұрын
You get a like from me.. Much appreciated 💯
@Budl1te 14 күн бұрын
@q.d.9802 thank you.
@rogergoodwin5533 18 күн бұрын
Same thing faulty fuze holder. But replaced all safty switchs anyway.
@betawithbrett7068 21 күн бұрын
THANK YOU MY FRIEND!! 🥳 It was that 20A IOD fuse... yep. Whew!!
@MichaelGass Ай бұрын
I watched your video to identify where to locate the three o-rings on the basket. My system is back up and running with no leakage. Thank you!
@JoeZyzyx Ай бұрын
Way to pass emission test with vacuum leak error codes. The vacuum test is NEVER done until the gas tank is down a couple gallons after totally filling. However, if you erase the code, you will see a P1684 that alerts the test site you erased the codes and it won't pass. If though, you crank the engine 50 times, then drive about 50-70 miles and only stop and refill immediately at gas station near the VEIP site, check the 1684 code is gone, then you can pass the test.
@JoeZyzyx Ай бұрын
Had same vacuum code issues on 2003 3.3L engine dodge grand caravan in june 2024 after 115 miles on it. I don't drive much, LOL. So, after small leak went to big leak code, I went looking. I was lucky to find it easily. I started with top hose on engine, the one in back that just curves over from intake manifold cover with vacuum and curves over to the CPV (crankcase positive ventilation) which is screwed into metal lower part of intake. Discovered the nipple tube had broken off completely from the PCV , so no longer working at all. Very cheap part, about $10 as I recall. It never had a clamp on hose, just a push-on, but I did add a clamp to it this time. So, always check the easiest places first, and that CPV is probably the easiest.
@markmifsud4044 Ай бұрын
Where did you buy your fan
@Budl1te Ай бұрын
I got them off amazon.
@Budl1te Ай бұрын
SUN ENERGISE Solar Powered... www.amazon.com/dp/B0B4K8H6NT?ref=ppx_pop_mob_ap_share
@antoinetteshelton3022 Ай бұрын
Damien Anderson
@antoinetteshelton3022 Ай бұрын
Damien Anderson
@tommyg5729 Ай бұрын
thank you, had all the same symptoms. The battery was going bad, so had to jump it week before, installed new battery, thought I fried electrical system, nope just fuse, had a spare on my motorcycle to get me going.
@sidneykingjr10 Ай бұрын
Looking behind the motor
@sidneykingjr10 Ай бұрын
Leaking behind the motor 2003 Dodge Grand caravan
@sidneykingjr10 Ай бұрын
Water leak
@tradekingdistributing3586 Ай бұрын
Excellent video. Haven't found my P0456 leak yet on a 05 Caravan, but I would also recommend checking the functionality of the purge valve, which is the under hood component shown at 00:25 I've heard they are a relatively common failure item, and when they fail they will allow vacuum to leak down without the PCM commanding the valve open. Mine tested good, up next is the Natural Vacuum Leak Detection assembly (NVLD) and the Leak Detection Pump (LDP), as shown in this video.
@JoeZyzyx Ай бұрын
check the CPV. that's what mine was. Top of engine to rear some.
@dawnbaker7861 Ай бұрын
I had an anterior and posterior spinal fusion from T2 to S1. 5 rods, cross links, screws and 5 inch illiac screws in each hip. Big surgery took a total of 5 years to get back to normal. Also had 2 level cervical fusion as well. Hang in there, it gets better.
@Budl1te Ай бұрын
Mine is like a stubbed toe compared to yours. Thank you.
@steviebrown7478 2 ай бұрын
Man hang in there I think I'm having the same problem with my back. My L4 and L5 are deteriorating I saw my X-ray and it looks like I didn't have full set of my L4 and L5 discs having pain with walking standing can't pick up anything over 15 pounds lost of balance sometimes man I'm 52 did nothing but hard labor work mostly construction but I'm really not sure about having surgery on the back I no it might help but just worried it might get worse...
@Budl1te Ай бұрын
I worried about that too but soooo many people I've seen it has helped, right after the surgery it felt better, I can walk easier, stand easier. I don't do any hard labor anymore, if I did, I don't think I would do it after healing from this, I wouldn't want to stress out the upper vertebrae any faster than need be. I'll see how it goes though, so far so good.
@potterna1101 2 ай бұрын
you're looking better. Was this a regular or a minimal invasive surgery?
@Budl1te 2 ай бұрын
Thank you. It was a regular. About a 5 inch cut in the lower back.
@potterna1101 2 ай бұрын
good luck, bro. hope you continue to improve
@Budl1te 2 ай бұрын
Thank you. It is tough not being able(or allowed I should say) to bend or twist.
@evans8412 2 ай бұрын
Did they do to S1
@Budl1te 2 ай бұрын
Only L4 and L5 on me.
@SamsungGalaxy-ls8ys 3 ай бұрын
This is a known issue and duromax doesn't care. Replace the spark plug with an NGK or Champion spark plug. The manual lists the NGK replacement.
@chrissikora8097 5 ай бұрын
Good camera work 👍
@solutionSeeker-vd1dy 5 ай бұрын
This was very help. I had the problem described and watched other videos with suggest. For some reason, I put in the same search and got this link. I previously tried changing out the 20A fuse with no success. But, pulling the 15A IOD fuse and replacing did the job. You save me hundreds of dollars in repairs and lots of hastles.
@Budl1te 5 ай бұрын
I'm glad it helped.
@ayeejiff9847 5 ай бұрын
Back to the store for a refund
@more-or-less-it 5 ай бұрын
cox does not support port forwarding they just like you to run in circles
@kurtjohnson500 5 ай бұрын
How do I fix latency issues than
@theamazingsahhul1597 5 ай бұрын
My sounds like rattling when going through ruff streets and I feel like it’s my motor mounts especially the one on the drivers side
@Budl1te 5 ай бұрын
If the rubber has broken up you can get rattling.
@user-dj3yn1yj6p 6 ай бұрын
Thanks! My model was slightly different, but the key to successfully programming was hitting "OK" once the tv turned off.
@juansifuentes3917 6 ай бұрын
I got a question for you.. do you connect your generator with an 50amp inlet and a 50amp breaker. If so did you have to tinker with the generator which is neutral bonded? You can’t have a bonded generator and a bonded home. That I’m told.
@Budl1te 6 ай бұрын
I have not connected it to the home yet, have not researched it yet, will likely need to install sub panel for my setup.
@juansifuentes3917 6 ай бұрын
I have tried contacting duromax but no response. I have a 13000EH with a 50amp inlet on a 50 amp breaker but will research it too
@firz77 6 ай бұрын
Did you get it running? mine was sitting for about the same time and does the same thing. Was it the regulator?
@Budl1te 6 ай бұрын
They told me to use a better spark plug Ngk bpr6es. They said there was a period where the stock plugs weren't hot enough. I swapped the spark plug out. I haven't fired it up yet, figured I can use gas in a pinch. I'll try it when it gets warmer.
@strongdelusion9442 6 ай бұрын
Thank you for the video!
@user-im2dt7tl9u 7 ай бұрын
You have to press 5 instead of 4 if u have this model.
@valeries1099 7 ай бұрын
Thank you! I just about gave up getting this to program. Great instructions.
@knarphiss 8 ай бұрын
Thank you, Was at a loss trying to find my no power issues.
@mattguptill1795 3 ай бұрын
same here
@user-gi1jo1iw4o 8 ай бұрын
It turned my tv off after multiple times pressing the power button following your directions, but thats it. It wont turn back on or work if i manualy power it on EITHER... Ughh
@Budl1te 8 ай бұрын
It may find a power code but if that isn't it, manually turn the TV back on and keep searching as if nothing happened till the next power off.
@Budl1te 8 ай бұрын
When it does turn off, I believe you need to press enter to save the code before you can control it with the remote. If it doesn't work the first time, you need to start over, when it powers off, go to the TV and manually power back on and keep searching wit the remote till it powers off again.
@DuroMaxPower 9 ай бұрын
Thanks for sharing your DuroMax XP12000HX video!
@CountryShape 9 ай бұрын
thank you. I have an old Sanyo tv that needed a new remote, your video like a voice from heaven called to me.
@Xavie905 9 ай бұрын
I have a 01 dodge caravan jist changed spark plugs wires & coils and I still feel a vibration in idling and even in park , do you think it could be an engine mount ? I feel the vibration in the chair a lot and near the cup holders.
@Budl1te 9 ай бұрын
Depends, if the engine is not idling smoothly as it should, you may still feel a vibration, even with good mounts. I found the vibration was worse when I put it in gear. But, there are 4 mounts so, different mounts that are bad could transfer vibration of different kinds and situations. If the engine is fairly smooth at idle you shouldn't get vibration. Check the front and back mounts to start.
@Xavie905 9 ай бұрын
@@Budl1te I mainly feel it drive when idling once I drive it goes away , it’s a fairly strong vibration the passenger seat shakes so I’m guessing it’s the right side mount.
@Budl1te 9 ай бұрын
Sounds like a mount for sure. I believe there are 4 total.
@Xavie905 9 ай бұрын
@@Budl1te when one of the engine mounts our bad does the engine shake mroe then it should ? I noticed mine shakes alot then before. It’s nerve racking I hope this fixes the vibration just to throw this in there i need a 02 sensor but I don’t think that’s what’s causing it …. Could be wrong tho not to sure
@Budl1te 9 ай бұрын
It can cause a shake, especially when in drive. The o2 sensor can cause the engine to run rough sometimes if sending bad signals. Catalytic converter can be clogged possibly. The front mount is easy to inspect for damage. Not sure about the rear one but the sides are more difficult to see.
@albertomorales9761 9 ай бұрын
Muy buen video
@user-px2jk8jk1g Ай бұрын
Me podrían ayudar en español
@albertomorales9761 9 ай бұрын
Muy buen video
@kolonel2 9 ай бұрын
Thanks so much for the tips on the c-clip removal. Life saver!
@stevebowdoin2709 10 ай бұрын
Thank-you! So glad to find your video. No instrument panel function (except back lighting), and after watching your video, I verified that the turn signals and hazard lights did not work, also. It was that small wire connection on the battery terminal. I'm guessing the small black wire on the negative terminal might cause the same....?
@Budl1te 10 ай бұрын
It would likely cause issues with something if disconnected.
@BobbyNewhartFace 10 ай бұрын
This can actually be done without jacking the car up or supporting the engine. This mount stops the torque from rotating the engine in reverse or drive. I thought I may have to jack up the engine as my other mounts are probably worn out, but I had to do it away from my tools. And to my surprise, the center bolt came out without me doing anything except undoing it. I did try to not let the engine hang on the slide where the mount can be positioned. The bolt holes are slotted on the mount attached to the transmission. I tried to position it in the center, but even after getting home and jacking the engine up, I was not able to. My bolts are at the top part of the slot, like yours. My in drive and stopped vibration did not completely go away. The van feels way more solid when pressing the gas, but I believe I need to do the rear mount as well. Which, I'm not sure I am going to be able to do that.
@Budl1te 10 ай бұрын
I'm just used to jacking them up from the old days. I thing there are 2 on the sides as well. I didn't think about the rear to be honest. My v8s only ever had 2 lol.
@warrior353jeansguerrero8 11 ай бұрын
Great Job finding it did you find a replacement ? ... 😢😢😢😢
@Budl1te 11 ай бұрын
I did not replace anything, I just zip tied all of the hoses to prevent air from seeping in. It worked well.
@albertomorales9761 11 ай бұрын
Good video 👍
@8bitwarrior Жыл бұрын
If the roof is steel, why not use magnets to fasten the panels?
@Budl1te Жыл бұрын
That is a good idea i had not thought about that. With our wind though I'm afraid a big gust could tear them off or push them around. The surface is not flat enough to fit the panels between the raised ribs so wind could get through the bottom.
@christopherwatson283 Жыл бұрын
Husqvarna, John Deer, Kohler. How many hrs.?
@Budl1te Жыл бұрын
It is hard to tell. If I leave the key on the hours continue to go up I don't know if the previous owner had the same issue. Right now it's sitting at about seven hundred and twenty hours.
@christopherwatson283 Жыл бұрын
@@Budl1te I just welded my frame. 425hrs. Key on. Time's Ticking. I saw a lot of debris where it was laying. Most wire's that break. Break from shaking, rub through, over heating and corrosion.
@Budl1te Жыл бұрын
I had started it, moved it a little, shut it off to air up the tires then wouldn't start after that. Definitely corrosion. It had 410 hrs on it when I got it.
@jefffrayer8238 Жыл бұрын
Good find and not an expected place to look. Although my XUV550 Gato and Z920A will show the hours with key on my John Deere 155c and LA150 only show hours with engine running. Good find and easy fix for you. Good video.
@Budl1te Жыл бұрын
The hour meter should only show when running. I've left the key on for days and those hours keep racking up. I turn the fuel shut off to let the gas drain from carb to avoid varnish if for some reason it ends up sitting unused for months, then when it dies I forget about the key. So now I have about 270 additional hours on the meter that are not from the engine running. My fault, but frustrating.
@jefffrayer8238 Жыл бұрын
@@Budl1te I certainly understand the problem, imagine the hours if you went on vacation. I'm not sure why the Gator and Zero Turn will turn the hour meter on without engine not running but not the lawn tractors. Not sure how they do it other than meter only works when charging system is working? Maybe meter runs off A/C side of rectifier.
@kenwatts2581 Жыл бұрын
Man. You just saved me hundreds of dollars on a clk 320. Definitely need AC in Texas during summer month.
@jonaspriebeofficial Жыл бұрын
how did you get the app on your website
@Budl1te Жыл бұрын
I got to this from inside the router itself, not from the app.
@jonaspriebeofficial Жыл бұрын
@@Budl1te how do you do that
@Budl1te Жыл бұрын
You need the ip address of your router and enter it into your web browser from a pc inside the network. You will need to know the username and password, usually printed on your router. I do not know if the process is the same as I have not used Cox in 2 years.
@jonaspriebeofficial Жыл бұрын
@@Budl1te thanks