14 күн бұрын
Ай бұрын
2 ай бұрын
2 ай бұрын
Пікірлер
@frogomg420 2 күн бұрын
So i can pirate games with it ?
@AsdrenK 5 күн бұрын
i insert the sd card with the HATS folder it still shows me "no sd card" instead of launching Hekate
@adagames75 5 күн бұрын
When I copy the hatspack folder into tolhe root of my sd card , certain files fails to copy , how can i fix the issue please help me .
@oraliafigueroa1876 8 күн бұрын
I have a switch that is hard nodded and on the screen at 1:57 but now won’t turn on. What can I do?
@blenls 10 күн бұрын
can i have a bigger microsd card? for example 300tb?
@FixModBuildExtra 7 күн бұрын
yer
@GoopRoblox 13 күн бұрын
hey! i just modded my switch and i was wondering how to switch back to cfw after switching to ofw? do i just restart like normal and it will boot to hekate, or will i have to go in rcm
@FixModBuildExtra 10 күн бұрын
Depends if you have a mod chip, if you do when you turn it on it boots to Hekate. if you use an rcm loaded you will need that to boot to cfw
@Project_Dreadman_official 18 күн бұрын
Yo just to let everyone know you can connect your WiFi on Emummc with no problems. Hats blocks communication to the Nintendo servers and blanks your console’s serial number. But you don’t have access to the eshop or can update you games but if you edit exosphere.ini file and the system_settings.ini file you can get the eshop back an update your games. Also if you are banned on Nintendo’s servers Emummc is useless.
@Goodgamer78 19 күн бұрын
What microscope did you use?
@FixModBuildExtra 18 күн бұрын
This one: kzfaq.info/get/bejne/l8eJrKSAtM_Kf6s.html Did a review on my other channel, it is really good!
@angelofdeath0203 20 күн бұрын
When I try to launch the CDW EMUMMC I run into the following error. "Error while loading fss0 atmosphere/package3 wrong ini cfg or missing/corrupt files! Failed to launch HOS! press any key..." I have tried to relaunch and reboot and keep running into this issue. Any solution that comes to mind for this?
@Project_Dreadman_official 18 күн бұрын
Redownload the hats project. If you still get the same error just use sysmmc CFW. It’s the same thing and you can play the games you bought on the OFW side
@Project_Dreadman_official 17 күн бұрын
Also make sure that you set up Emummc correctly just like in the video
@angelofdeath0203 15 күн бұрын
@@Project_Dreadman_official thank you! I will give that a go and see if it works 🙂
@Project_Dreadman_official 15 күн бұрын
@@angelofdeath0203 ok np
@angelofdeath0203 20 күн бұрын
Great video! At the end if it asks if you want to start software of update does it matter if you update the software or should you not do this?
@FixModBuildExtra 19 күн бұрын
I wouldnt, always update offline
@stoogysteven2667 28 күн бұрын
What does this do?
@FixModBuildExtra 24 күн бұрын
Reballs a Switch cpu
@diamondsandteatimewithniki8805 28 күн бұрын
Does anyone know if there’s a max limit on sd cards for switch homebrew I did a 3ds recently and it was recommended not going over 128 cause there was image issues with custom themes and such ik 128 it’s recommended minimum for switch but I’m just wondering if there’s a point that’s deemed ‘too much’ for the switch
@FixModBuildExtra 24 күн бұрын
I have read people using 512gb, not sure on higher as its not readily available but I think it will go higher.
@diamondsandteatimewithniki8805 24 күн бұрын
@@FixModBuildExtra thank you for confirming!
@javierprados9662 28 күн бұрын
I tried with 2 sd cards and both failed, they are now corrupted without solution
@FixModBuildExtra 24 күн бұрын
Thats a shame, I have done a lot of these now and never had a single corruption.
@mohdfaizal2953 29 күн бұрын
Hello..can u do video about how to solder back sp2 capacitor 🙏 i'm accidentally knock off that capacitor during modchip installation
@pedro_franco 29 күн бұрын
Great video, thanks for sharing! 👍 Just leaving my suggestion for a future video: please consider another background music and also showing some more the final result at the end of the video.
@FixModBuildExtra 24 күн бұрын
Will do, thanks
@i.e.2 Ай бұрын
Should the SD Card be from san disk company or it doesn’t matter it’s work from any cd card??
@Project_Dreadman_official Ай бұрын
As long as it is a notable SD card company
@ChespinGator Ай бұрын
Very good video 🔥, can you do a tinfoil video setting up and protecting from servers?
@Project_Dreadman_official 17 күн бұрын
Hats already protects you from the servers
@ChespinGator 17 күн бұрын
@@Project_Dreadman_official ok thanks, I use the checker and setter anyway but is it automatic built in on atmosphere?
@Project_Dreadman_official 17 күн бұрын
@@ChespinGator well it depends. Are you using the hats pack?
@ChespinGator 17 күн бұрын
@@Project_Dreadman_official yes it's a April one I think the April or June one,
@Project_Dreadman_official 17 күн бұрын
@@ChespinGator yeah then it’s gonna protect you from the server
@skrilla.scratch Ай бұрын
Awesome vids.... Any insite in switching out battery port on switch?
@benlo202. Ай бұрын
This was very helpful.
@onelinkgadget Ай бұрын
kzfaq.infos1qfjQ_uGy4?si=3IF0btpQFybQ7lkj Thanks man 😅
@onelinkgadget Ай бұрын
I just installed my chip it show no sd after installing i unclip the battery to clean and screw everything back it’s booting to normal firmware any solution
@FixModBuildExtra Ай бұрын
Check your solder points, also check the rp2040 has fw installed on it
@onelinkgadget Ай бұрын
@@FixModBuildExtra done that it’s protector on the cpu once i cover it it will boot firmware without the protector it to no sd
@puloyblu2254 Ай бұрын
can you use exfat format?
@FixModBuildExtra Ай бұрын
Yes and its easier for installing files over 4gb BUT it is known to corrupt and crash your system so you run a bigger risk of losing everything and having to start again.
@BernardoCarvalho-lv1gz Ай бұрын
Amazing video. Should be on top, clearly!!! Public service!
@FixModBuildExtra Ай бұрын
Thanks mate
@johnny8dog1 Ай бұрын
Again, you the man, or lady if so. Thanks' again
@FixModBuildExtra Ай бұрын
Thanks, the man will do :)
@johnny8dog1 Ай бұрын
Thank you so much for this. What do i do when upgrading sd size (chip)? do I just have to run the whole process again or no?
@FixModBuildExtra Ай бұрын
There are ways to clone sd cards with partitions, but I always find it better to start fresh, just make sure saves are backed up etc then can also get rid of the bits that no longer use.
@izankarim-ko4rx Ай бұрын
im using oled hardmod chip,to anyone see this, you can set the sd partition 10GB cause the 'system' only take 4GB at least.. dont waste storage😅 and much faster just taken 1 minute something to do this..👍👍
@heavenrose2 Ай бұрын
how do u turn it back on when it fully dies?
@FixModBuildExtra Ай бұрын
Plug it in and it will get a battery meter in the corner, hold the power button down for about 20secs, the Nintendo logo will come on then off, if you have done it right nothing will be on the screen.
@ChespinGator Ай бұрын
Is using telegram safe?, not sure about those apps as they always pop up on website?
@FixModBuildExtra Ай бұрын
Yer I have used it for years now
@leonxndr7576 Ай бұрын
My Switch doesnt show any battery percentage, voltage and current stats. Neither at the charger or in battery mode. And it was fully charged when i modded it. Do you know something about my issue?
@FixModBuildExtra Ай бұрын
No sorry, not seen anything like that before?
@echospace7347 Ай бұрын
1:55 you didn't show what to do if its not hard modded, or even what that means, what do i do with my rcm jig?
@tggorudon2551 Ай бұрын
What does an rcm jig do? Isn't it usually you install chip then you set up it with sd card?
@FixModBuildExtra Ай бұрын
if its not hard modded you will need to put clip down right joycon rail, insert injector and hold volume up and power button to boot.
@zmrd9816 Ай бұрын
hi, after trying to boot emummc. shows up erooro that says : /atmosphere/fatal_errors/report_0000000001980fd5.bin. any idea what to do ?
@matthewshafer9545 Ай бұрын
Why wouldn't you just format it to ExFat ?
@FixModBuildExtra Ай бұрын
more chance of corruption
@TheZooz1234 Ай бұрын
So does the software automatically protect you from connecting to Nintendo servers or you have to make sure you manually disconnect from wifi . I haven’t seen anything to clear on that not quite sure i understand yet … someone told me you can still connect to wifi but that Nintendo servers are blocked by some setting .
@FixModBuildExtra Ай бұрын
There are other ways but i never connect to wifi when on custom, only when using official.
@Project_Dreadman_official 18 күн бұрын
@@FixModBuildExtrathere is nothing wrong with connecting to the WiFi tho. You will not get banned and you have no connection to Nintendo’s servers. but I understand it is your preference so do what you like to do.
@Project_Dreadman_official 18 күн бұрын
Yes, hats does. It stops all communication to the Nintendo’s servers and blanks your switch’s serial number. Also you don’t have access so the eshop or can update your games but you can edit exosphere.ini file and the system_settings.ini file to get back access to the eshop and update your games.
@Mr.Taperoll Ай бұрын
How to do on windows 11
@FixModBuildExtra Ай бұрын
sorry dont have windows 11, I would assume it would be the same?
@Mr.Taperoll Ай бұрын
I’ll try to follow to steps
@dustynixon06 Ай бұрын
amazing video!! showed me exactly what i needed!
@XMHX143 Ай бұрын
ty so much
@XMHX143 Ай бұрын
how i can open the 4 screws in the back i try y0 and y00 nothing worked😢
@FixModBuildExtra Ай бұрын
I use Y00
@XMHX143 Ай бұрын
@@FixModBuildExtra bro ty for all help now i order the rp-2040 ty soooooo much
@ACDIo-1 Ай бұрын
On telegram there is 2 download. The one you showed and the customer firmware that is larger. What to do with that one? Thank you
@FixModBuildExtra Ай бұрын
Yes one is fw for if you need to update offline, if not dont need to download it.
@ACDIo-1 Ай бұрын
Can you connect shortly to internet and disconnect quickly to be able to find it in the router and block it?
@FixModBuildExtra Ай бұрын
I wouldnt connect at all but you might be ok, so up to you
@ACDIo-1 Ай бұрын
@@FixModBuildExtrathank you!
@Project_Dreadman_official 17 күн бұрын
You can connect to the internet. Because hats blocked connection to the Nintendo server so if you connect to the Internet, you’ll have no problem.
@SeaViper Ай бұрын
Thanks a bunch for the help, started working aprenticeship at a soldering store here, customer wanted me to not only solder but to do the setup as well
@FixModBuildExtra Ай бұрын
Glad it helped!
@XMHX143 Ай бұрын
What the name of the flux you use
@FixModBuildExtra Ай бұрын
Kingbo flux
@XMHX143 Ай бұрын
@@FixModBuildExtra i can use any flux right?
@FixModBuildExtra Ай бұрын
@@XMHX143 Any electrical flux
@XMHX143 Ай бұрын
@@FixModBuildExtra Thanks for the help boss
@XMHX143 Ай бұрын
Pls do tutorial how install games that is last step
@FixModBuildExtra Ай бұрын
Done
@XMHX143 Ай бұрын
I buy 5 games did you recommend me to mod the switch
@i.e.2 Ай бұрын
If you can yes of course if you mod your not gonna pay for games any more
@leonxndr7576 Ай бұрын
What is the Button called "Normal" under thereboot options. And why is it not good to be connected to the Internet on the Otherside?
@FixModBuildExtra Ай бұрын
I have not pressed normal so not sure! You Never want to be connected to the internet when using custom firmware as the big N can detect it and will ban your console.
@leonxndr7576 Ай бұрын
@@FixModBuildExtra your whole console or just the online services?
@FixModBuildExtra Ай бұрын
@@leonxndr7576 Online, and updates
@Project_Dreadman_official 17 күн бұрын
@@FixModBuildExtrano they won’t. hats protect you from the Nintendo servers
@Project_Dreadman_official 17 күн бұрын
You can connect to the Internet with no problem. because hats blocked connection to the Nintendo servers
@XMHX143 Ай бұрын
what the name of the modchip you use
@FixModBuildExtra Ай бұрын
rp2040, typr that in aliexpress and will come up with a few options depending on your switch version
@XMHX143 Ай бұрын
is this tutorial for v1 or v2
@FixModBuildExtra Ай бұрын
Works on both, just the orientation of the chips you solder slightly differ.
@XMHX143 Ай бұрын
@@FixModBuildExtra did rp2040 modchip still works and what chip you use give me your chip full name
@XMHX143 Ай бұрын
How install games
@FixModBuildExtra Ай бұрын
i will look at doing a video soon
@XMHX143 Ай бұрын
what the name of the modchip you use and did you buy it from aliexpress ? + thanks for easy tutorial give me your chip full name
@onelinkgadget Ай бұрын
Post process to install games too
@FixModBuildExtra Ай бұрын
I will look at doing a video soon
@onelinkgadget Ай бұрын
Thanks really did help ❤
@jjboy4038 2 ай бұрын
could you send a link too where i can buy the chip
@FixModBuildExtra 2 ай бұрын
Search aliexpress for rp2040, links get taken down immediately