Awe thanks Zee! I still can't believe how we met either and how easily we could have missed one another. We love you too!

​​@@KimagineDIY aww thanks Kim🥺😁 ikr u guys were honestly ment to be Im happy for u guys!

Zeeeeeesssssus of Nazareth made it to the conversation what is up zeeeepers

Thank you so much for watching and reaching out with your question! I appreciate your attention to detail. I found my original manual, and I’m honestly not sure about that small cutout either. My feet already came with adhesive on them, so I just peeled away the wax paper to reveal the sticky part. My best guess is that it might be a template to help place the feet evenly in the four corners. To be on the safe side, I would recommend contacting IKEA Customer Service. Thanks for pointing this out and happy assembling!

Thank you! 🥰🥰🥰

Thank you so much for watching and sharing your feedback! I'm really glad you liked the detailed, step-by-step instructions. I apologize for the music making it difficult to hear me. I appreciate your suggestion, and I'll make sure to adjust the audio in future videos to improve the viewing experience. Thanks for helping me make better content!

Thank you so much for watching and sharing your excellent tip! I was applying the peel-and-stick wallpaper to my mom's bar in the kitchen, so I didn't think of mentioning the heat-resistant type. Your contribution is incredibly helpful for the DIY community. Thanks again for the great advice!

Haha thank you for watching @isinginmycar. I'm so glad you liked it

@@KimagineDIY it was great 👍

Thank you so much for watching and sharing your feedback! Our cats love looking out the window too-we call it "cat TV," lol. I'm thrilled to hear that the video was both entertaining and informative for you and that it helped boost your confidence to tackle your DIY project. It's always great to know that my tips and tricks are helpful. Happy DIY-ing, and give your cat a little pat from me!😸

@KimagineDIY Kim, Thanks I will my family love what I did with the window.

Amazing! Great Job! 😃

Thank you so much for watching and for your question! Although I haven’t tried using peel and stick wallpaper on concrete myself, I did some quick research to help out. I was surprised to find out that it was possible. Research states: Peel and stick paper can adhere to concrete walls, but success depends on the wall’s condition and the type of paper you use. Here’s a quick guide: - **Surface preparation is key**: Make sure your concrete surface is smooth, clean, and free of dust, dirt, and grease for optimal adhesion. You might need to wash the walls with a TSP solution or sand them lightly to create a better bonding surface. - **Consider the type of peel and stick paper**: Opt for thicker, high-quality vinyl wallpapers with strong adhesive backing for better adherence on concrete. - **Manage expectations**: While peel and stick paper can work on concrete, it might not be as permanent or durable as traditional wallpaper or paint. Be prepared for possible peeling at the edges over time, especially in high-moisture areas. Here are some additional tips: - Apply the wallpaper in small sections, smoothing out any air bubbles as you go. - Use a primer specifically designed for high-alkaline surfaces like concrete if the wallpaper recommends it. - Monitor the edges of the wallpaper periodically, especially in humid environments, and reapply if necessary. 😀Just a heads up-the texture of the concrete may show through the wallpaper, kind of like saran wrap over a bumpy surface. Good luck with your project, and feel free to reach out if you have any more questions!

Thank you so much for watching and sharing your feedback! I'm thrilled to hear that the video was helpful. I totally get it-I had to put together four of them for our office, and it sure was a workout! If you have any questions or need further assistance, feel free to reach out. Great job, and happy assembling!

Thank you so much for watching and sharing your feedback. I'm so glad this video was easy to understand. If you any questions please feel free to reach out.

Thank you so much for your kind words and for watching! I really appreciate your support 😃. If you try it out, be sure to share your DIY progress. I’d love to see how it turns out!

Thank you so much for watching and for sharing your feedback! I'm so happy that this video was helpful 😃

Thank you so much for watching and for sharing your feedback! Your comment made my day-it's such perfect feedback that it almost sounds like I paid for it! 🤣 I'm so glad the video gave you the confidence to hang your Besta. If you have any more questions or need further assistance, feel free to reach out. Happy installing!🛠

Thank you so much for watching! It's all about practice and a bit of fun. Just like learning to juggle or ride a bike, living with long nails and dancing in stilettos gets easier with time. Practice makes perfect! 😆💃🏽

Thank you so much for watching and sharing your feedback! I'm thrilled to hear that the video helpful. If you have any more questions or need further assistance, feel free to reach out. Happy adjusting!

Thank you so much for watching and sharing your feedback! Yes, it was a tricky pattern choice, but sometimes I just love to go big or go home! 😊

Thank you so much for watching and sharing your feedback. I appreciate your support. 😀

It was surprisingly get strong. Thank you so much for watching!

Haha, no, but I did accidentally use his toothbrush as the cleaning toothbrush recently since they were the same color! 😅

Thank you so much for watching and sharing your feedback! I agree, there are times when you can reuse Teflon tape, and I've done it myself in a pinch. However, I aim to share the most optimal methods for success in my videos, and since Teflon tape is designed to be single-use, I recommend applying fresh tape for the best seal. I appreciate your insight and hope you found the video helpful!

Thank you so much for watching and sharing your feedback. I'm so glad this video was helpful for you.

Thank you so much for watching and reaching out with your question! Since I do a lot of DIY projects, I invested in an advanced stud finder that can detect pipes within walls. In the video description, I’ve linked to the materials I used, including two types of stud finders. The one with the LEDs on top is the same one I used in the video. Additionally, I used a step stool to look behind each washer and dryer to get an idea of where the lines and pipes start going into the walls. I hope this information is helpful for you!

Thank you so much for watching and reaching out with your question! Fortunately, my window muntins are inside the glass, so I had a nice flat surface to work with. However, in my previous apartment with old single-pane windows, I had to deal with muntins as well. I ended up cutting small rectangles for each window pane, which was a lot of work but definitely worth it for the heat control. If you have to do the same, just take your time and it should work out nicely!

My apologies for the delay in response. Thank you so much for watching and sharing your thoughts on your project! For my project, the main goal was to change the direction of opening and closing the blinds so I wouldn't have to crawl on my couch, lol. Generally, you can't change the direction of vertical blinds by flipping the vanes one at a time. I tried that too and nearly got one stuck because the clips that hold the vanes have a slight curve to them. Definitely check the rotation direction of the clips before you install them to make sure your privacy is intact. Happy DIY-ing, and thanks again for your comment!

Thank you so much for watching and sharing your question! Yes, it's normal for the paint to look frosted when you spray paint the outside of a wine glass. If you reference the last vase I painted in the video, you'll notice that I painted the inside, which also has a frosted appearance. It looks glossier because you see the color through the glass. For a clear, see-through look with a color change, you might want to try glass tinting instead. I hope this helps, and happy painting!

Thank you so much for watching. Who knew couch layouts could inspire such creativity? I'm so glad this video was helpful for you! I'm excited about your project!

Thank you so much for watching and sharing your feedback! It sounds like a fantastic setup with the Glassvik doors and Översidan lights. I haven't installed those specific lights myself, but I understand the challenge you're facing. Sometimes, IKEA designs can be a bit tricky. It might help to consult the IKEA manual or reach out to their customer service for specific advice on the installation. If anyone else in the community has experience with this setup, feel free to chime in! Good luck with your project, and I hope it turns out great!

Thank you so much for watching and for sharing your feedback. I'm thrilled that this video was helpful for you. Great job on assembling your unit 😃

Thank you so much for watching and sharing your feedback! I’m thrilled to hear that you found the instructions simple and easy to follow. It means a lot to know the video helped you out. If you have any more questions or need further assistance, feel free to reach out!

Thank you so much for watching and for your kind words! I'm glad you found the video helpful. For mounting over a thick chair rail or half-inch molding, you might need to use spacers to ensure the your unit will sit flush with the wall. Alternatively, you could install a backing board above the chair rail to create an even surface for mounting. I hope I understood your question. If you have any more questions or need further assistance, feel free to ask. Happy installing!

Thank you so much for watching and sharing your feedback! You’re absolutely right-matching up the stripes would have been a great touch. I was focused on getting the invisible zipper just right, and I assumed the fabric would naturally align since the squares lined up initially. Thankfully, I’m still happy with the result, and the slight misalignment is barely noticeable when the pillow is on my couch. I appreciate your keen eye and suggestion!

Thank you so much for watching and reaching out! Door alignments can indeed feel like a tricky puzzle. Keep experimenting with the adjustment options-there are many ways to move the hinges, so it might take a bit of patience and trial and error. Give yourself some grace, and you'll get it sorted out. If you need more detailed help, feel free to ask. You've got this!

Thank you so much for watching and sharing your feedback. I'm so happy you enjoyed the video.

Thank you so much for watching and sharing your feedback. I'm so happy to hear that this video was helpful for you.

Thank you for watching the video and for reaching out with your question! It sounds like you might be experiencing some alignment issues with your drawers. The three bottom larger drawers in the IKEA Alex unit are indeed the same size. To help troubleshoot, could you provide more specific details on how they're misaligning? Sometimes, getting the hardware into the slots can be tricky due to the paint finish. Also, ensure that the brackets are correctly placed; if they were put on wrong, it could cause alignment problems. I once built the frame upside down myself, so I understand the challenges! Feel free to share more details, and I'll do my best to assist you further.

I’m putting mine together right now I had to go to ikea today and get 2 new pieces because I broke mine while trying to take it apart. I put the top of the drawer on the bottom and the bottom on the top which is why the drawers weren’t fitting. It wasn’t until I flipped it and the drawers went in fine that I realized I had the bottom on the top and vice versa.

Thank you so much for sharing your experience to help the community! I'm glad you overcame and had success with your Alex unit.

Thank you for your kind words 😊 and for watching the video! I'm thrilled to hear that the video was helpful for you. If you have any more questions or need assistance with anything else, feel free to reach out.

Thank you so much for reaching out and for watching the video! It's great that your Besta frame is level, but I understand it can be frustrating when the doors don't align perfectly. In the hinge adjustment section of the video, I demonstrate how to straighten the door. It might take some patience, but with a bit of grace and perseverance, you'll get it sorted out! Let me know if you need any more help.

Thank you for your comment and for watching the video! I'm glad you found it helpful. The furniture clips that attach to the suspension rails typically come with the Besta unit when you order it. If you need additional clips or if they were missing from your order, I recommend speaking with an Ikea employee to arrange for replacements. They should be able to assist you further. If you have any more questions or need assistance, feel free to reach out!

Thank you for your comment and for watching the video! I'm glad you found the information helpful. Since the table leg extenders don't alter the table's initial structure, I would recommend sticking to the weight rating provided by the manufacturer. If you have any more questions or need further assistance, feel free to ask!

Thank you so much for watching in for sharing your feedback. Your support is greatly appreciated.😀

That is a great tip. Thank your so much for watching and sharing!

That's fantastic to hear! I'm thrilled the video was helpful for you. If you have any more questions or need further assistance, feel free to ask.

Thank you for your kind words and encouragement! I'm thrilled that you found the video inspiring. I really appreciate your support! It fuels my passion for building even more.

@@KimagineDIY and the cool thing is there’s so much to learn from many right here on KZfaq! 🥳. Anytime I want to build something, this is the first place I start! My brother who’s a general contractor just rolls his eyes at me haha 😎

Thank you so much for your kind words! You made my day😊. I'm so glad this video was helpful. Thank you so much for watching and good luck on your project!

Thank you so much for watching and sharing your feedback.😊 If you have any more questions or need further assistance, feel free to reach out.

Very cool. Thank you for watching!

De Nada😃 Thank you so much for watching!

That's correct! Peel-and-stick wallpaper can also be used for backsplashes in kitchens. It's a versatile material that can be used for various DIY projects. There are adhesive backsplashes with a 3D tile effect are more permanent, while peel-and-stick wallpaper is designed to be removable, making it a great choice for renters or anyone looking for a temporary update. If you're interested, you can check out my video where I installed a similar backsplash for my mom. bit.ly/KitchenBacksplashRemovableWallpaper Let me know if you have any more questions!

@KimagineDIY I'm sure you might have said it in the video. I had the volume down at work. Can you drop link to purchase? Thanks for replying back. Shelfs ordered yesterday. Back splash project next 🤣🤣

Absolutely! I've included the link for the peel-and-stick wallpaper tool in the video description below for easy access. You can find it along with the other materials used. But here's a quick link. For smooth walls:amzn.to/496jmLx For textured walls: amzn.to/3FoF8wB If you have any more questions or need further assistance, feel free to ask!

Thank you for watching and for your question! Yes, you can drill a hole in an IKEA Besta unit to run cords through. For our Besta unit, we found that the cardboard backing was thin enough to drill a hole for running cords. Just take your time and ensure you're drilling in a spot that won't affect the unit's stability. If you're unsure, it might be helpful to refer to ask Ikea Customer service or seek advice from a professional.

@@KimagineDIY I am the professional 😎 lol. Thanks for the fast response. I'm going to go ahead and go with the 3 door one. Since it comes with the spot for cords on top. Your video gave me so many more ideas.

That sounds like a great choice! The 3-door Besta unit sounds perfect, especially with the cord opening, I forgot they have that one too😄. I'm so happy that my video sparked some new ideas for you. If you have any more questions or need further assistance, feel free to reach out. Enjoy your project!