122cadet

Пікірлер

@rvbzero7 Жыл бұрын

The Duralasts are a BITCH to get on

@zacharyfillmore6424 Жыл бұрын

What motor

@danhuss1099 Жыл бұрын

These saws have an air cleaner flaw. The air filter should be removed and sealed with high temperature RTV silicone since it doesn’t have a gasket. Otherwise what happens is the fine sawdust sucks into the carburetor and eventually causes the saw to start running like crap. When the air cleaner needs cleaning blow it out with compressed air then spray the filter with carb cleaner and dry it with compressed air on a regular basis. Apparently the research and development team missed this flaw. The Husky saws have the same flaw but easily fixed using the the RTV silicone to seal the air cleaner.👍

@marcc.e.wagner8789 2 жыл бұрын

What position does the decompression button on top need to be in to start and run it?

@danr308 2 жыл бұрын

Either. I never use mine. I mean I have but I feel like it's not needed for smaller saws.

@stockhero8540 2 жыл бұрын

Oh wow I have the 98 E250 498000 miles. Go Ford!!

@Uncle_Harvey_78 3 жыл бұрын

A little disappointed....was hoping for a bit more technical rundown besides it having a 20" bar. Sounds nice though!

@nets6725 3 жыл бұрын

I have same truck with 550k miles change transmission 1x at 350k miles

@paulg444 3 жыл бұрын

I'm so glad he told me about the craftsman wrench

@obeconoberougle9497 4 жыл бұрын

I was just looking at the prices of Husqvarna and Jonsered 50cc class saws. They cost $400-$450. These are plastic clam-shell chainsaws that typically have plastic bearing raceways that will melt with hard usage. For that kind of money your in the ball-park of a pro-grade Echo 501P. A 50cc saw with a magnesium case... rebuild-able. I know this video is a little over two years old now. But no way I'm spending that kinda money on what's considered a "throw-away" saw. Now if you could find a deal on one, that's another story.

@kennethverkest6717 2 жыл бұрын

I've had mine for 4 years now never had any issues with it it runs good it's a good firewood saw good for cleaning brush off fences lines and it is really light for a 50CC saw and the most important thing it doesn't kill the back and I have probably cut about 25 quarts of wood up with mine still run strong

@kellyronaghan5587 4 жыл бұрын

Jonsered is poulan

@TheSickNeeds 4 жыл бұрын

Does anyone know what spark plugs are equivalent to the one that it comes with? Mine came with an HQT-1 and I can't even find those here in Canada. Not sure if its suppose to be ZERO RESISTANCE OR NOT.... so I can't tell if its the problem or not.

@woofy548 4 жыл бұрын

Husqvarna owns Poulan Pro

@woofy548 4 жыл бұрын

where did you buy it from? how much?

@edzeigler1164 4 жыл бұрын

I bought one and I like it.

@jbruner17 4 жыл бұрын

I have a CS 2165. I am looking to purchase a ripping chain for this saw. Jonsered, do you sell a ripping chain that will fit this Saw or can you refer me an aftermarket company that is reliable that I could contact.

@matthewgrigg576 Жыл бұрын

Go with a Stihl Rs chain

@johnwyman6126 11 ай бұрын

Granburg

@MoMonkeytucky 4 жыл бұрын

3:13 when he put his fingers in the muffler and said a lik too freaky i felt that 😂😂 great video though i love johnsereds

@PopaAlexandru. 5 жыл бұрын

This style of starting is recommended for people who have too many limbs (feet, fingers) or more lives. Also by those who are passionate about changing dampers. Of course, the pruning is made by Husqvarna Group but Jonsered is also called. I have a Smart 450 with Mercedes engine so I have a Smart or a Mercedes? Although Smart is made by Daimler is not Mercedes!

@jasonhuyghesr390 5 жыл бұрын

What a shitty demo video, and no craftsman doesn't make poulan husqvarna does, I wish people knew wtf they were talking about before they waste people's time watching there video, and I have a poulan pro 5020 and it's a monster vs the jonsered,

@ronmills8092 5 жыл бұрын

What a crappie video. Just wanted to find belt routing

@122cadet 2 жыл бұрын

Not that hard to figure out.

@jwr4829 5 жыл бұрын

Uhh I got this.... uhhhh... Saturday... dont waist my time with telling me when you got this!

@keithmray 5 жыл бұрын

Husqvarna is a city in Sweeden. That tag is showing where it's made not that it's made by the chain saw company "Huaqvarna".

@g.d.7629 5 жыл бұрын

It is made by Husqvarna with a K watch the video you will see it. Jonsered/Husqvarna about same saw Jonsereds were selling more than husq so they sold out jonsered!!

@johnwyman6126 11 ай бұрын

@@g.d.7629 Because people knew that the Jonsereds engineers were superior. Every time they came out with an advancement, all the other saw companies had to wait until the patent ran out. This is why Husqvarna bought Jonsered, they kept the engineers in the city of Jonsered but they killed off the saw name.

@gple87 5 жыл бұрын

Good old cold start

@122cadet 5 жыл бұрын

Oh yes fun stuff lol

@b.s.adventures9421 5 жыл бұрын

That tensioner pulley bolt is reverse thread. Doesn’t matter as you changed the whole tensioner.

@jodyhardy8631 5 жыл бұрын

See you dont know what your saying husqvarna owns poulan/po-lun,craftsman,homelite,redmax and jonsered

@jodyhardy8631 5 жыл бұрын

Stihl isnt junk tell that to loggers ,i dont see them using jonsereds i worked in the woods i know

@re49991 5 жыл бұрын

Jody Hardy new stihls are trash. Even the power companies here are switching away from them

@g.d.7629 5 жыл бұрын

Jonsered does or did make good saws! 2253 same as 550xp 2252 same as husq 545 2260 same as husqvarna 560xp NA in USA 2260 same engine as 562xp and cuts very fast at 12.8lbs. I really dont like stihls but do like the ms250 and the ms261 w18 bar for $589 Family center farmington,mo they give about 3 chains too!!! In Illinois try to find a stihl dealer who will do that. Thats why I dont like em probably. 362mtronic is good too. All my jonsereds have autotune except a 2245.I only bot it for the chrome bar. And some loggers do use Jonsered/husqvarna esp out northwest.

@codyrivenburgh2926 3 жыл бұрын

Ur dumb as shit...... U say poulan pro and craftmas are shit but johnerred is a very good saw.....but husky owns allbthe companys....and. The craftsman/poulan pro are basicly just there budget husky/johnsered.....i oersanly own a 455 rancher and a poulan pro......i always keep a poulan around for shit work cutting roots and shitty wood like Apple trees that always seam to have metal in them.....or if a buddy needs to borrow a saw he gets to borrow the poulan.....and it hasnt ben killed yet.....if u care for it and know how to tune it it will run just as good as ur johnerred

@petropete3122 2 жыл бұрын

My father in law has 2 new stihls and it’s always a struggle to start the newest one from day one. Dealer can’t figure it out. Other one is not much better. Not sure on models but are 55 and other 50cc. My experience with those, way over priced and over rated. I would not buy one. I own a husky and an echo with ZERO issues from day one.

@embrodak77 5 жыл бұрын

The design looks almost identical to the old HQV 445 I have

@scottmiller5859 5 жыл бұрын

You mentioned price and I have recently been looking at several brands. The Stihl MS271 Farm Boss is the same price as the Jonsered CS 2250. They are not 50cc saws. Right now I’m torn between the Stihl and the Jonsered. My only concern with the Jonsered is that I just don’t know enough about them. I have friends and relatives that run Stihl and they are all very happy with them. Maybe I should be the rebel and go Red.

@wayneovmax9638 5 жыл бұрын

They are not 50cc????? Says who

@dr.alimpije511 4 жыл бұрын

jonsered 2250 is 50.2 cc,3.2 hp .I have it its exellent saw .

@johnpower5526 6 жыл бұрын

The poulan pro is made by husky as well

@PatrickBaptist 6 жыл бұрын

You need a T-50 bit for that one bud. I've got 4 kids, I understand all about having to use what your stuck with, mine is on there real good and I was just checking to make sure it wasn't a reverse thread for whatever retarded reason.

@bmbott123 6 жыл бұрын

Buy the flip caps for gas and oil . Trust me they are worth it

@jeaniethomsen2651 6 жыл бұрын

KingQuad Bott where?

@96cr 3 жыл бұрын

I hate flip caps they have spilled bar oil on my pants

@jimknops1441 6 жыл бұрын

There better be beer in that fridge!

@redneckbryon 6 жыл бұрын

I think they call those bolts Ford technician only bolts, lol It is relatively common for Ford to do stuff like this.

@gple87 6 жыл бұрын

Oh fuck!!! Try French lake auto parts

@gple87 6 жыл бұрын

Looking good bud

@122cadet 6 жыл бұрын

gple87 thanks!

@christophertuft3886 6 жыл бұрын

Yes but its hard on the crank.....wen i run in new chains start with chain at proper tension and keep wrench in ur wedge belt then wen gets a bit slack tighten it, easyer on saw chain if u tighten it gradually as it stretches....n Husqvarna is dropping the Jonsered name too btw....

@AndrewNelson1985 3 жыл бұрын

3 years later and Husqvarna hasnt dropped the namd yet.....

@LCASTV 3 жыл бұрын

@@AndrewNelson1985 But they have dropped the products (at least I cant find any).

@johnwyman6126 11 ай бұрын

@@AndrewNelson1985 2 years more and they're done.

@gple87 6 жыл бұрын

Nice find. So this is why you wanted the trailer.

@122cadet 6 жыл бұрын

gple87 yes that is why lol

@christophertuft3886 6 жыл бұрын

Ur chains a bit too tight fella...

@122cadet 6 жыл бұрын

Christopher Tuft i know It was a new chain they do stretch out after a while.

@bmbott123 6 жыл бұрын

Adjust it u don't want it to stretch .. u will prematurely wear the bar

@davidmaj4259 5 жыл бұрын

Good thing somebody said it

@shanechambless8 6 жыл бұрын

They make there saws and husqvarna saws

@K11124 6 жыл бұрын

Hi there. My friend has a 1975 MW Gilson 16 hydrostatic that he is using for snow removal right now. However even though he has the owners manual it does not say where or how to add hydraulic fluid. His machine has been losing it and now he can get parts moving that need to move. I know yours is a bit different but perhaps you can help me as I would imagine it would still be relatively the same place. Any help you could give me with this will be greatly appreciated!! We have had a huge snowfall and I would love my driveway plowed. Lol. My friend is very mechanically inclined so there is no need to dumb anything down. I will be sending him this video as soon as my question is answered. Thanks again.

@glenntaylor4844 6 жыл бұрын

Is the saw still running good? Would you buy it again? Thanks for the review. I’ve been trying to decide between this one and a Stihl ms 271.

@MemphisMojo15s 6 жыл бұрын

Glenn Taylor I bought 2 CS2255 saws this year and both run great. In my humble opinion, if you buy A Stihl, get the 362. Best all around saw they have. If I were you, and money was not a big factor, get the Husqvarna 460 or 465. Honestly, parts and dealer support will be more readily available since Husqvarna is killing off Jonsered within A few months. I have the 460 and if 60.3 cc's and the option to use the 18-24" bar isn't enough, I don't have any other ideas ☺ I have A video of the saw itself if you wanna see what one looks like up close, if you haven't already. I've had mine for almost A year and it runs as good as it did the day I bought it. Plenty of power

@GI-rt7ol 6 жыл бұрын

Glenn Taylor bought one 6 months ago used for about 10 hours so far runs and cuts great