I'm curious to hear all the reviews on these Headers and Y Pipe. Main thing is that they fit without any modifications and they line up w factory/aftermarket cat back exhaust. price comparison from $600 to the ARH Long Tubs for $2100.
@oscarflores2466Күн бұрын
Thank you bro..easy to fix my 14 chevy silverado
@chandlerklaus28792 күн бұрын
In the words of cam Haynes “keep hammering”
@hunterrwiilsonКүн бұрын
If it gets the job done, is it really a dumb idea?
@ja44764 күн бұрын
My 2017 gmc sierra lost all electricity few hours ago, Two days after having my windshield changed... do they remove those plastic pieces when doing that job ? if so it might be my problem.... My wheels/tire were also replace two weeks ago, So I'll check both of those ground this weekend, Thanks for the info, it's really appreciated....
@ja44764 күн бұрын
I found my problem... indeed the battery has been disconnected few days ago when they replaced the windshield...... In my differents test, I took my boosting cable, plug it on my neg pole and the other side on the frame... All light came up... It started right up..... My neg cable was starting to be corroded and they didn't tight it enough.... A new cable is ordered, for more safety................. I'm really lucky it happened in my driveway............
@hunterrwiilson4 күн бұрын
@@ja4476 Nice. Yeah very thankful it happened in my driveway too!
@ja44764 күн бұрын
@@hunterrwiilson Thanks again for your video... I've seen that my ground on the passenger side (under the truck)is becoming rusted, I'll clean it up in the coming days... and I had no idea from the ground close to the speaker, I'll check that one too and make it sure it makes a perfect ground..................
@hunterrwiilson3 күн бұрын
@@ja4476 of course! It’s unsettling that this issue was never addressed by GM but I’m glad I can help alleviate any issues
@jordanmorgan74565 күн бұрын
is it hard to take front bunper off sierra
@bartmann839 күн бұрын
When braking did you get tire vibration from the tread.
@hunterrwiilson8 күн бұрын
@@bartmann83 I dont believe so
@bartmann838 күн бұрын
Ok. Thank you!
@hunterrwiilson8 күн бұрын
@@bartmann83 no worries!
@andyvaldez28309 күн бұрын
Are you still running the same setup or have you decided that you would like to add the Corsa resonator? Just curious as to what it might sound like. Can't seem to find a single video with a Corsa sport muffler and either the Corsa resonator or the factory resonator installed.
@hunterrwiilson9 күн бұрын
Still has the same setup. Since I put long tube headers on my Sierra, this exhaust isn't nearly as loud as in comparison. So I'll stick with it the way it is for now
@erock3710 күн бұрын
What level or lift do you have? Nice f150!
@hunterrwiilson10 күн бұрын
Thanks!! It's just a leveling kit, I'm assuming maybe a 2", the previous owner had it installed
@_ALPHA_61911 күн бұрын
Sik I have the same set up on my 2024 GMC Denali 4wd and rides like 🧈 Same color the white tint tri coat I got the duramax diesal. Congrats
@hunterrwiilson10 күн бұрын
What a beauty of a truck that is! That's awesome
@TRILL5711 күн бұрын
Sounds great just subscribed to you, I have the same exact set up recently got my truck back with a rebuilt trans and donor motor from a wrecked Tahoe. Does your truck have a tune?
@hunterrwiilson11 күн бұрын
@@TRILL57 thanks for subscribing and welcome to the fam! I don’t have a tune at the moment but I plan on getting one soon. After camming
@TRILL5711 күн бұрын
@@hunterrwiilson nice I plan to cam mine eventually. I got a tune on my truck and man do I feel a difference it’s a totally different truck now.
@hunterrwiilson10 күн бұрын
@@TRILL57 I'm eager to get this truck tuned because she's quick with the mods now on a stock tune, I can't imagine a good tune with the parts that I have and will soon
@franciscoesparza382812 күн бұрын
Adding the long tubes u didn't need a tune
@hunterrwiilson12 күн бұрын
I don't need one, but I will def need one soon due to additional modifications
@franciscoesparza382812 күн бұрын
@hunterrwiilson oh OK yeah I have borla atak with shorties and I want to get long tubes
@hunterrwiilson11 күн бұрын
@@franciscoesparza3828 they’re extremely rowdy. Sounds like a race truck
@franciscoesparza382811 күн бұрын
That's wat I want lol
@hunterrwiilson11 күн бұрын
@@franciscoesparza3828 be prepared to be looked at with stank faces cause you’re so loud lol
@3xoticyt21914 күн бұрын
clean rig
@hunterrwiilson13 күн бұрын
Thank you!
@mcs418915 күн бұрын
Nice
@Vramirez658215 күн бұрын
It scares me every time I get into my 2016 Chevy Tahoe LTZ. Im going to try both your fixes tomorrow. I'll keep you updated! This should be a recall.. whats the criteria? Someone dying on the freeway?
@hunterrwiilson15 күн бұрын
From the stories I've read in this comment section, it's been too close for some people...
@andyvaldez283015 күн бұрын
Sorry I didn't catch it if you said it in the video but is your pipe 3" from the factory flange all the way back to the exhaust tip?
@hunterrwiilson15 күн бұрын
No worries! Yes it is. 3" V-clamp and back from the factory disconnect after the Y-pipe
@andyvaldez283015 күн бұрын
@@hunterrwiilson Thank you!
@hunterrwiilson15 күн бұрын
@@andyvaldez2830 You're welcome!
@tartamuditis16 күн бұрын
I had same setup headers 3” catless y pipe and borla ATAK. Ended up taking it off. But people told me to buy a vibrant resonantor to tame it down. Also if you run e85 its louder
@hunterrwiilson16 күн бұрын
I don't mind the rowdy-ness of it lol, adds to the character of the truck imo
@RyanEnders-m8e21 күн бұрын
Dude this is perfect but use a bottle jack or similar to help compress the bushings. I put a jack on the bottom of the bolt and just eased the bolt up enough to get the but to catch (then proceeded like you did). Both sides took me 30 minutes total.
@hunterrwiilson21 күн бұрын
@@RyanEnders-m8e that ain’t a bad idea. But I didn’t have really anything worth of tools back then. If I did it today I’d probably do it somewhere near to how you said!
@brysongath638521 күн бұрын
Is the noise pretty tolerable in person because it’s hard to decide if it’s ear piercing loud or if it has that good tone😂
@hunterrwiilson21 күн бұрын
It's very tolerable with this setup. I loved the way this setup sounded. I recently installed long tube headers and now she's a little too rowdy to be a daily lol
@brysongath638521 күн бұрын
@@hunterrwiilson love the build I have a Silverado modded very similar to yours
@hunterrwiilson21 күн бұрын
@@brysongath6385 thanks man! I do appreaciate that. And that's awesome man! Good to hear someone of good taste haha
@iiivan923 күн бұрын
Same issue. I got a size 10 wrench to fit in the speaker hole and from there I loosened and tightened it back up. Removed that foam shit from around and underneath
@jessequintero112224 күн бұрын
Did it start?
@hunterrwiilson24 күн бұрын
@@jessequintero1122 has been for the past 3 years since!
@3G00dboys4124 күн бұрын
I just found that both of mine were completely gone?! I never had a problem or noticed anything different while driving! But definitely buying them asap and installing they must have broke off
@hunterrwiilson24 күн бұрын
@@3G00dboys41 you’ll notice a stability difference for sure once you replace them
@georgehamilton84225 күн бұрын
Almost embarrassed to watch this and see how hacky the work is.
@brysongath638526 күн бұрын
I only see the third brake light on their website, is that the same bulb for turn signal and running lights?
@hunterrwiilson26 күн бұрын
@@brysongath6385 the brake/turn signal bulbs are the “7443 7444 Red CanBus LED Bulbs Turn Signal Brake Tail Lights | Error Free Anti Hyper Flash, T3 Series Upgraded Version | 2 Bulbs.” When you use the link again Just look up LEDs and select the brake/turn signals and then find the bulbs I described above!
@SeboltLawnLandscape26 күн бұрын
Love the stance! Great looking setup.
@hunterrwiilson26 күн бұрын
@@SeboltLawnLandscape thank you! It’s a pretty good looking setup
@Rocknkrizz28 күн бұрын
I honestly think my Dynomax race bullet sounds better. I almost went with this muffler but I don’t have headers. And they sound way better with headers in my opinion. Sounds good though bro.
@ShooterMcveach29 күн бұрын
The issue with the bolt not clearing the shock is much easer to do that you've shown here. Place jack underneath lower control arm and jack it up, thats how i did mine and worked great.
@hunterrwiilson28 күн бұрын
Mannnn, where were you when I did this?! Would've saved me so much time lol
@ShooterMcveach28 күн бұрын
@hunterrwiilson yeah sorry man lol....idk why he didn't do it that way, it's so much faster and easier.
@hunterrwiilson28 күн бұрын
@@ShooterMcveach yeah, I mean he (me) has never done that before until then, so I just had nothing else left to it but to do it. Knowledge for next time
@GuyKirk29 күн бұрын
I have a 2012 Harley Davidson eddition and that sounds better than mine. Great job. :)
@hunterrwiilson29 күн бұрын
Those Harley Davidson edition F150s are awesome though! Upgrade your exhaust and make it a 11/10
@GuyKirk29 күн бұрын
@@hunterrwiilson I'm already on it. Saw this video and you got me inspired. Thanks brudah. :) Much respect.
@hunterrwiilson29 күн бұрын
@@GuyKirk haha awesome! No worries, Jesus loves you!
@matthewmenadier9682Ай бұрын
Love the stance! Do you by any chance know how many inches it is from the ground to the fender in the front? Curious to see where mine would end up if I do this setup. Thanks!
@hunterrwiilson29 күн бұрын
Thank you! But it'll all depend on what setup you have, I have a 2.5" leveling kit, so unless you have the same setup measuring won't help much. The 305/70/20 tires are about 34.5" tall if that helps any
@matthewmenadier968229 күн бұрын
I was planning on doing the same lift and wheel setup so I was just wondering how high it was if you happened to know.
@hunterrwiilson29 күн бұрын
@@matthewmenadier9682 Ahh I see, I'll measure it when I get home and see what it is!
@matthewmenadier968229 күн бұрын
Thanks!
@OkGreat-Ай бұрын
Is this the brushed caps or the silver ?
@hunterrwiilsonАй бұрын
Brushed caps to match the wheels
@iAmKidStaticАй бұрын
Bro I just installed these in my truck, I want to show you the angle these sit on my truck and I want you to tell me if you think it is good or not? If yeah let me get that email bro!
@CreachterZАй бұрын
Turned out great! Good job. I certainly like the matte look better than the shiny plastic look.
@hunterrwiilsonАй бұрын
Thank you!! I agree, the matte wood grain look is 1000x better than the basic fake shiny plastic
@andrewl.4277Ай бұрын
sir, the speed limit on hyde park rd is 45 mph. better slow down there cowboy
@hunterrwiilsonАй бұрын
@@andrewl.4277 Hyde park rd in Mexico
@andrewl.4277Ай бұрын
@@hunterrwiilson I wrote a python script that changes the youtube video resolution to 144p everytime your face is on the screen but it switches to 2160p60 (4k) whenever your truck goes vroom vroom
@hunterrwiilsonАй бұрын
@@andrewl.4277 that's actually probably pretty suitable, lemme get that code
@andrewl.4277Ай бұрын
@@hunterrwiilsonyou're gonna need a couple tools like the google api client library and an api key from the google console along with a full setup for a python environment so just the code itself wouldn't be beneficial to you. plus im not done. i'd like to alter the code so that everytime you're yapping it mutes the video
@hunterrwiilsonАй бұрын
@@andrewl.4277 how do you know when to tell it that I’m yapping vs truck sounds? 👀
@AimingWanderouslyАй бұрын
I know this vid is a couple years old now, and I hope you can take some constructive criticism to improve... but MAN please stop flinging that camera around like that, it's disorienting and nauseating on larger screens. SLOW camera movements, if not a stationary tripod! Thanks.
@hunterrwiilsonАй бұрын
Oh trust me, you should take a look at some of my most recent videos, a lot better videography. But I do appreciate your feedback! I'm all for improving in all areas.
@AimingWanderouslyАй бұрын
@@hunterrwiilson Great! I will check out some more. We all start somewhere. Even ChrisFix started somewhere!
@hunterrwiilsonАй бұрын
@@AimingWanderously "HEYY GUYSS, Hunter Wilson here" lol
@NitrocotromanoАй бұрын
I just bought a 2018 F150 5.0. I've always run Flowmaster Super 44"s on everything I've had since 2009. And they sound phenomenal!! BUT, I've been wanting to swap to Corsa extremes for a while now. But, it seems like they've stopped selling the extreme single muffler. They now have the Pro series in its place and was contemplating it. But, you may have sold me on them. But, I always run true duals from the engine back, getting rid of the y pipe and adding high flow catalytic converters and an X-pipe. These things would sound SOOOOO good on this set-up!!!
@hunterrwiilsonАй бұрын
SEND IT. Also, please make a video clip on that cause that seems it would sound amazing hahaha
@mattl1576Ай бұрын
Sounds good. Adding a small resonator before or after the muffler will really with the rasp. I’d recommend Borla pn 401339 or a Total Flow resonator.
@hunterrwiilsonАй бұрын
@@mattl1576 I’ve been considering, but it’s not too bad rn, maybe if I cam the truck and it gets absolutely ridiculous
@dakotajones8010Ай бұрын
tune time?
@hunterrwiilsonАй бұрын
@@dakotajones8010 not yet, got more cooking up 👀
@MarshalBoatmanАй бұрын
Is your truck 2wd or 4wd?
@carter.colemanАй бұрын
4wd at 8:58 you can see the selector
@jorgecuadros9931Ай бұрын
Sounds amazing 🔥
@hunterrwiilsonАй бұрын
@@jorgecuadros9931 thanks Jorge!
@temosview1725Ай бұрын
Great video! 🔥
@hunterrwiilsonАй бұрын
@@temosview1725 thanks man!
@ryancarter1132Ай бұрын
What size lift and tire setup do you have? Wanting the same setup and how’s the rubbing at full turn?
@hunterrwiilsonАй бұрын
@@ryancarter1132 just a 2.5” level on 305/70/17 tires and Method 315s. It only rubs at the middle point, but not at full lock
@ryancarter1132Ай бұрын
Fucking love it
@matthewarcher9323Ай бұрын
Muscle truck 🔥🔥🔥
@hunterrwiilsonАй бұрын
You know how we do! 💪
@tylerfoster4311Ай бұрын
For your phone mount, where do you have the cable ran and hidden at?
@hunterrwiilsonАй бұрын
It's run from the USB port in that small cubby in front of the shifter, and then up through the dash and out of the corner of that small pocket on the upper dash to the back of my phone mount.
@tylerfoster4311Ай бұрын
@@hunterrwiilsonthank you bro, I have the same phone mount with the wireless charging and have been trying to figure out if I have to take dash apart to run the cable lmao
@hunterrwiilsonАй бұрын
@@tylerfoster4311 yeah you'll unfortunatly will have to take the dash apart some if you want it completely hidden lol, it was a pain but it's clean
@lukedude6056Ай бұрын
This is sick. I’m in VA now, We should definitely meet up for this next year brother💪🏼
@hunterrwiilsonАй бұрын
Bro no way! Dawg for sure! Gotta catch up fr 💪
@winifred3440Ай бұрын
Take the drawers out before you load into truck!!!!!!!!
@meshelltaylor72Ай бұрын
Great job! Swapping my wood grain for black carbon fiber. Headed to buy a heat gun. Thanks for sharing!
@hunterrwiilsonАй бұрын
Awesome! Praying it all goes well! Of course!
@andrewl.4277Ай бұрын
I kinda liked the 3 red lights instead of 2 red 1 white
@hunterrwiilsonАй бұрын
You're wildin
@andrewl.4277Ай бұрын
Bro why u flashin us
@hunterrwiilsonАй бұрын
Cause I'm showing lights, duhhhhhh
@teamdogfightfishingАй бұрын
I’ve been experiencing these issues for the past year or so, I addressed the two grounds inside the dash panel for the ignition about 10 months back, and I thought my problems were solved until yesterday when the truck completely shut off on the interstate during rush hour, I’m lucky to be typing this comment out right now, but needless to say I’m about to go check that secondary ground on the underside of my truck now 😅
@hunterrwiilsonАй бұрын
Praise God that you're alright! But I would address that ground, dig into the distribution box on top of the battery, clean those connections, and put some dielectric grease on before tightening back down. I haven't had a single issue since.