Why don’t you produce 2016 F150 Platinum Seat Cushion? With A/C

Is there any way I can still buy the clip bracket for the back panel of the seats?

Muchas gracias.

Haha, red pants and a red shirt would've been better.

But how long will that last??

Do you recommend replacing the old foam or not?

This procedure does not apply to '98 F-150 Lariat high back buckets.

My son wrapped the seatbelt around the head rest have my waist car and we cannot get it off without removing the headrest so we both thank you

do you have a video regarding the passenger side leather as well?

To get the J-channel bit off (3:00), I used Harbor Freight's "Mini Pick and Hook Set." If you stick the straight one in the side, it pushes those barbed end things apart enough for it to just slide right out. I couldn't believe how easy it made it after all the frustration.

Does anyone have a video of how to install the replacement foam and vinyl for the center console? Thx!

Hey, what’s the name of the plastic edged strip and where can I get some?

Interesting The only thing that exists for a 12gen F150 is the bottom durafoam on the drivers side. Quite the selection….

Will this fit the Escalade models? 15-20?

Thanks! I was struggling to open the rear seat after putting it back in on my recently purchased used Yukon XL. Just what I needed!

It would have been nice for you to do a how to video that was clearer it was to fast no explanation

Dude you man handled that seat!

You are the Mvp. Doing the seats on my C10 right now, and I needed the help haha.

Next video show close ups of what your doing. Not everybody is as smart as the professionals.

Hi, I will attest to this video on seat clips. We have a leather seat cover from The Seat Shop on our 2002 Sierra and it stays on...unfortunately, The Seat Shop didn't make a cloth seat cover for our 2002 Silverado seat bottom, so we went with an Amazon cheapy...darn thing comes loose after a day or two of use. A quick search on Google affirms that this is a common problem. So the moral, these little things matter.

Please I need the Cocoa Brown for a High Country. Do you offer that color? I want to get it from you since I watched your video.

Do disconnect the battery and let the battery module to the air bags or they will deploy. See there is tricks to every trade. You have to be complete in you installations.because some people will get balls to the wall and ok i think i can do this and bamfucking airbags and now you have a whole totak difference kind of problem.lile vehicle needs to be rebbooted and reset and now airbags replace about 2000 dollars and a person specialized in just that are guess vehicle total.

This is not a easy job you guys need to communicate in the videos to these diy. If you dont have a second hand to help you and patience and degree of difficulties doing this. Everyone can do a video but can they do the job it is not easy if it was retards would be in business doing your job. Must not be to busy doing videos in between.just my opinion.

Many thanks, after leaving them out all winter I decided to put them in on June 29th in Mississippi middle of a Saturday afternoon with a heat index of 110. Almost had a heat stroke. One of the two seats was sprung like that and I fought it for 30 minutes before I saw your KZfaq and figured out how to correct the problem. Thanks again

What about removing the seat belt before you removed the seat

Thanks for your help!!!

Has a big button on the side of the headrest nothing at the base

Shit doesn't have any of that

Very detailed precise video. I'm excited to send my cover to you fellas (2009 F-150 Platinum) for a new drivers seat fabrication.

I just finished putting seat covers on my 2003 Mercury mountaineer. I followed the video, it was easy to follow, The job turned out really good. I'm very happy. Thank you guys for making the video.

Thank you very much. I just got the bottom seat completed took me a little bit but it’s all good now. Went back and referred to your instructions and looks great. Appreciate it. Thanks for sharing.

Where do I buy just the foam seats?

Thank you so much for posting this series! It made installation a success and way less intimidating. Very much appreciated!!

Oh my days. I love your ears. You belong in my family.😂

You don't have any for a Lexus LS430'2006 on your site

Ok daddytaz, I JUST THREW UP IN MY MOUTH!!! 🤢 WTF Dude🤷 😂

You do one hell of a job , love watching your video's and i have to say you're one hot man

Very useless vid, thank you

Thanks for the invaluable information! The front 2 hold down bolts, #13s, have threads hanging below the floor so prior penetrating spray would aid in their removal. The back 2 are enclosed in a channel. Thanks again.

I have a 2016 STANDARD F150 cab with a center seat. I keep the back rest folded as I never have more then 2 people. When I feel under the headrest, I find a latch on the inside of ONLY ONE of the posts ... nothing on the other. Is there some secret I'm missing, or do I just need to press the one really hard?

I have a roush 427r and I don't know if reproduction covers are available for that car. Its got that Jack Roush Signature in the shoulder area. I wonder if these covers could be disassembled and the inserts with the embroidery can swapped from the original seats. I wonder how close these covers are to the originals... Probably would need someone who has the correct equipment to stitch the old and new together.

Do you make the back seat too? Its not on the website

I finally was able to fix my seat after a year of not being able to lift the seat open. I have watched a zillion videos on this. I have taken the seat apart twice only for it to work while out of the truck but once put back in stuck again... I was about to purchase a new seat for $385 but decided to give it one last try. You explain this procedure so well!!!!!!!!!!!! It was those back seat brackets so once I truley slammed it in... everything worked! Thank you so much!!!

Nice tip! How long will it last before it reverts back into the wrinkled state?

Nice! Is it necessary to remove the seat from the floor bracket in order to replace the seat cover? If not, what difficulties is there when doing while the seat is in the vehicle? Thank you.

What steamer do you use?

Thanks for the tip worked 🙌

Thank you sooooo much!!!! Very helpful and straight to the point! I was able to take of my headrest to fix my seatbelt that was stuck for months!!!

Iam replacing my interior soon thank you for the information I'll be ordering from you

Hey, maybe you all could help. I tried to swap out the seat in my 07 Expedition with a driver seat from an 08 expedition. They have the same connectors, same trim levels vehicle wise, but I can get the seat to have power to move. I know the seat works, it just won't power up, but the stock seat does. Now, the stock seat has a molded headrest while the donor seat has a removable headrest, I'm assuming this was just a change in years as 07 was the first coming off of the previous generation, could this be my problem? I would appreciate any help you all might have if any, thank you.