Jeff, I am getting that error intermintently; however, one of my thread guides near where the needle inserts came apart. I have the little metal piece, but I can't figure out how to snap it back on.
@PorcelainCactus9 сағат бұрын
I know this is a long shot, but my mom recently had her 1970's Bernina 830 start acting up on her. The needle won't stay centered. She can't use it as the setting won't stay center. It was since she adjusted the pattern wheel. The three technicians that looked at it, with 40 years experience said it was unrepairable. I think this is a lie. Do you have any idea what could be causing the problem?
@rogerpeggywheat163015 сағат бұрын
Thank you so much for this video.
@nancyburke5740Күн бұрын
Thank you. You saved my a service call and hours of frustration. I used your tips and everything works great.
@krisschaufelberger98532 күн бұрын
Thank you Jeff Great fix for all basting and sewing. Wrap the bobbin seven times -just tried it and it is easy and the bobbin stays taut, winds evenly without loose threads in the middle.
@nique11023 күн бұрын
Thank you so much for this video! This has been something that has frustrated me for years! I can't wait to try it.
@PeggySue-RL3 күн бұрын
Great machine😮
@berninajeff3 күн бұрын
It sure is!
@RoundMtnDryGoods3 күн бұрын
Love learning how to tricks from you!
@Pipsinstitches4 күн бұрын
Hi Jeff, I have one of these machines and also have a 727. I think it was you who told us what number to put in front of the serial number to find out the year of manufacture. Was it 6? And do you add that to the first number? I forget what you said and I can’t find the video. Cheers
@joannaharmon80645 күн бұрын
Brilliant!! I've been asking the repairman at the dealership where I bought my machine ever since owning my 790. He never had an answer for me and I haven't been able to solve it. Many thanks to you Jeff
@brindlecat6 күн бұрын
Thank you so much for your diligence in correcting this problem for us! I’m anxious to begin using it. So helpful!
@mariagraziatopai68036 күн бұрын
Thanks you are the first person who give me a trick for the basting trouble that I always experiment!
@connievance57636 күн бұрын
What a great video, I have been so frustrated trying to sew thick vinyl and had no idea how to take apart my bobbin case. Thank you!
@dudenaz6 күн бұрын
Another great video. Very helpful - Thanks Jeff.
@lorieldridge73666 күн бұрын
Thank you! Good instructions in your videos!
@smjp47256 күн бұрын
Thanks, Jeff! I managed to separate the tiny metal bit from the grey plastic bits of my needle threader. The images on your video helped me figure out how to remove, reassemble and reinstall it. ❤❤❤
@JC-sf2qm6 күн бұрын
Jeff ... thank you, thank you, thank you!❤
@berninajeff6 күн бұрын
You are welcome.
@dianamarlowe33527 күн бұрын
Thanks again Jeff. Your thr best
@berninajeff6 күн бұрын
Thanks again!
@nazeerasheriff8127 күн бұрын
Where can I buy sawing machine oil
@bonniegray70007 күн бұрын
Your fixing techniques have helped solve many frustrations! Keep them coming!
@berninajeff6 күн бұрын
Glad to help
@stephiepeterson7 күн бұрын
I have this probe]Lem all the time and it can even tear my stabilizer. I can’t wait to try this. Thank you.
@berninajeff6 күн бұрын
Best of luck!
@user-tf4og6be7i7 күн бұрын
Jeff would these legs fit my Bernina Artista 200?
@jackiematsumura26497 күн бұрын
Wonderful- there’s always a simple trick - thanks for sharing
@berninajeff6 күн бұрын
You are so welcome!
@FEIYUE-NETFIRST7 күн бұрын
wonderful!
@berninajeff6 күн бұрын
Thank you! Cheers!
@margaretderen20827 күн бұрын
I have had this problem for all these years since my 200 came out!!! THANK YOU!
@mrsjulieb70117 күн бұрын
Brilliant tip. Thank you. Can you do a video on thread cutters not cutting please?
@berninajeff6 күн бұрын
The issue with thread cutters is that it takes a really well trained tech to fix them. And regular cleaning.
@user-ei3gz1wt5o7 күн бұрын
Thank you! Hate when that happens!
@berninajeff6 күн бұрын
Glad to help
@jeane.27227 күн бұрын
thx
@berninajeff6 күн бұрын
😊
@shadow51mcke7 күн бұрын
I really don’t think I could handle this machine if I didn’t have you to walk me through everything, you are my most important u tube tutorial to have thank you so much.❤
@edelweissquiltingembroider17617 күн бұрын
i'm going to try this on doing thread changes as i have that issue doing embroidery also.
@berninajeff6 күн бұрын
Should help
@edelweissquiltingembroider17617 күн бұрын
great video thank you as i have those skipped stitches all the time.
@berninajeff6 күн бұрын
Me too. Hope it works for you.
@edelweissquiltingembroider17617 күн бұрын
i could not find it on your shopfy account
@berninajeff6 күн бұрын
Look for 5.5 foot holder
@QuiltyJill7 күн бұрын
Great video. That has happened to me. I love the Bernina basting box. Here's a tip. After I embroider a quilt label, I lay a piece of poly mesh on top of my design. Then, I stitch the basting box around my design. This way, I can turn my label right side out, iron it, the edges are turned under, and I'm ready to hand applique the label onto the back of my quilt.
@berninajeff6 күн бұрын
Nice👍🏻
@nebulachristie7 күн бұрын
Thank you so very much!
@berninajeff6 күн бұрын
You are wrlcome
@JillFischer-u9g7 күн бұрын
Thank you so much for spending the time to figure this out for me! I am so thrilled to have my basting box working!!!! You are beyond brilliant!!!
@berninajeff6 күн бұрын
Nice thanks again. Great to meet you.
@nancygross94227 күн бұрын
nice fix, thanks Bernina Jeff....for helping avoid a lot of frustration
@berninajeff6 күн бұрын
Happy to help
@conniesteele72137 күн бұрын
Thanks for all your wonderful hints.
@berninajeff6 күн бұрын
You are so welcome!
@elizabethk89387 күн бұрын
This happens on my Pro too. Thanks
@mariaricart63007 күн бұрын
Thank you, I've struggling with this problem and now is solved ❤😊
@berninajeff6 күн бұрын
Glad to help
@stephanieh9307 күн бұрын
Wonderful, thank you! I've heard lots of complaints about basting stitch not working (and I've had my own complaints as well when using it). This is excellent!
@berninajeff6 күн бұрын
Glad it was helpful!
@user-is3jz4nl8w7 күн бұрын
Will you be putting up a video on installing the extra legs on the 570 extension table any time soon? I purchased the legs from you, but am waiting for the video. Thanks!
@berninajeff6 күн бұрын
I will soon.
@debbietakashima40257 күн бұрын
Great info! Thank you for all your tips!!
@berninajeff6 күн бұрын
You are so welcome!
@mjcechman7 күн бұрын
Great information! Thank you for sharing!❤
@pamroberts92187 күн бұрын
Amazing tip! I had a terrible experience trying to reassemble my hook once - tilted my machine to see better and dog gone if I didn’t drop my machine off the table. Thank goodness there was no real damage - after the service techs had her for over a week - but I was sick and hubby was pretty upset with me.
@cathj85687 күн бұрын
Thx so much Jeff
@CathConvertKris8 күн бұрын
Hello! Thank you for your videos! I have the 780 and I was wondering if they had put out the update yet for that particular machine. I looked in their website and it looks like they had one August of 24. I’m trying to do this but it’s a bit confusing. Thank you for all of your videos and innovations!
@Crystalcoveartdolls8 күн бұрын
What oil do I need for my b580 please
@charlesraes85418 күн бұрын
You helped me gain the courage to take my Bernina 801 apart and get her back together again. Videos like this make so many peoples lives better and I just want to thank you for taking the time to give the community some of your wisdom to help us all out. Thank you.
@judybell20808 күн бұрын
Sewing and hit thicker area, machine seized. Fixed it but now has a weird noise when sewing