Can you cover the alternator, is it upgraded, how many amps are you drawing?
@ss6thgen33613 күн бұрын
whats the cost of the kit?
@ss6thgen33613 күн бұрын
whats the cost of this kit?
@snakesrule919014 күн бұрын
bro i gotta lq4 with ported 862s and our cams are exactly the same expect for i have a lil less lsa that’s an awesome build
@Stan1le14 күн бұрын
@@snakesrule9190 nice! Bet that runs pretty good too
@digztheherb42015 күн бұрын
I have a very similar setup but with flexfuel and meth on e50 its making 950whp. Traction has left the chat lol. Just ordered a 15 inch conversion and drag pack. 8 second street car. Great looking build buddy
@Stan1le14 күн бұрын
@@digztheherb420 950whp? What pulley’s are you running? Definitely making some higher boost but with the meth I can see that. No traction at all; never
@TryAmazonPrimeToday21 күн бұрын
Nice demonstration! I really like the tone of the TR's!
@jamesaustin404423 күн бұрын
and lost 20-40 lbs of torque.
@junaidkhurshed227523 күн бұрын
the one that you linked in this videos description, does it have the valved option?
@Stan1le23 күн бұрын
@@junaidkhurshed2275 no that is the non-valved version
@xavierhorace721327 күн бұрын
Sorry for asking you this, but can you possibly list everything I need of the LT4 supercharger? Like every part I must buy so I can have it installed. If you don't mind me asking. Thanks again.
I had two type R mufflers installed 3 weeks ago. At first I liked it, but now it's obnoxious. My neighbor complained about the cold starts. The drone inside is awful. It's causing vibration and rattles. The shop welded them on backwards. Not sure if that's part of the issue also.
@Stan1leАй бұрын
@@chriskrueger8225 well backwards definitely doesn’t help. But yes they are loud regardless. I switched to the TR now and it’s better overall
@chriskrueger8225Ай бұрын
@@Stan1le ok. I am going to order those and take them to a shop that won't put them on backwards. Lol. Thanks for the reply.
@alanm3079Ай бұрын
Cool taillights
@MrOzzyblkАй бұрын
Where to fine instructions on removing the lt1 gen v from camaro?
@caseyberry6959Ай бұрын
I'm building the 6.0 up in my Hummer h2. I know there's nothing on the planet that will make that car fast. I just want a little more responsiveness from it. And I researched all of these heads (and cams) and I'm going with the 243. But my man, I just want to say that this was the only video that I found where they actually had a side-by-side comparison and not just computer animations. Thanks for taking your time to put this out there. God bless
@Stan1leАй бұрын
@@caseyberry6959 oh man that’s great to hear. I appreciate the words and I’m glad the video could help. Good luck with your project
@E21091Ай бұрын
Tr vs borla xr1 ? Everything stock for now
@Stan1leАй бұрын
@@E21091 I dislike anything from Borla and I’ve never heard that one you mentioned
@ls_812Ай бұрын
Did you buy v6 kit? Do you have v6 or v8?
@Stan1leАй бұрын
@@ls_812 have a V8
@warren2129Ай бұрын
Im debating between minor upgrades to my current 5.3 or go with a cam swapped 6.0. It will probably be mu daily so im wondering what the fuel difference would be. I feel like a turbo 5.3 would be best on fuel and still make a lot of power when i want it. What difference did you see in your swap as far as fuel mileage?
@leroyshye50492 ай бұрын
Do you have to have a prescription with miracast for it to work also connected to vehicle wifi
@catchnc41312 ай бұрын
Channel seems dope just subscribed about to do my first motor swap throwing a built lq4 in my 2006 Silverado 1500
@scotts24d2 ай бұрын
You forgot to show how to adjust head lights & forgot to show how Tunnel cover works do you have to take it off to put things in bed or does it fold back too cab 🤔
@Stan1le2 ай бұрын
They adjust like the factory headlights; nothing special. Tonneau cover is just a soft cover that rolls up, pretty basic stuff.
@scotts24d2 ай бұрын
Thank You going to buy that Bed Cover like the look 👍
@roberthurst13782 ай бұрын
Honestly I’m glad you actually put some tire on there.
@shawnperry36522 ай бұрын
Hey
@lupeavila40062 ай бұрын
Thoughts on a lm7 5.3 with trucknorris cam , i want to put 243 heads
@Stan1le2 ай бұрын
I’ve heard that cam runs pretty good. I would 100% consider
@lupeavila40062 ай бұрын
@@Stan1le thanks man!
@Jeschitown2 ай бұрын
Great content you should have a lot more subscribers, i have the exact same truck and i would want it to look like that wow what a stunning truck nice job bro
@joshtaylor38252 ай бұрын
Hey man I just started following your show and I like your product- quick question would you recommend clear headlights off of E- Bay?
@joseofno2 ай бұрын
honeycomb,,, those are honeycombs
@cv11130712 ай бұрын
🎉🎉💯💯
@dennisquezada35342 ай бұрын
Can you post part numbers on your intake And fuel rails Any issues with the intake clearing the stock water pump ?
@user-us6rb4zy8j3 ай бұрын
What size stall you have
@alexklein4553 ай бұрын
Got an lt4 supercharger for 1800. Looking for just a small boost in power. Would you recommend just getting the $3300 AFM kit and that's all? Again just looking for a Lil reliable boost
@Get2Diggin3 ай бұрын
How do u have ur catch can setup? And I was noticing ur clean air outlet on top of throttle body is capped off. And ur catch can is run to ur passenger side valve cover. I know that thier is suppose to be a line run from that capped port on throttle body to the passenger side valve cover. Thanks
@funcle_kevin3 ай бұрын
Regarding the 4L80 swap, did you need to shorten the driveshaft or do anything aside from bolting it in and reprogramming the tune?
@Stan1le3 ай бұрын
Shorten driveshaft along with the 4l80 yoke. Also need to modify the trans mount or buy the swap version. Need different trans cooler lines to. It’s not a direct plug and play swap; but not hard either. Just small details
@funcle_kevin3 ай бұрын
@@Stan1le Right on. I appreciate the quick reply. I'm on the fence about building my current 4l60 or swapping in a 4l80. The plan is to add a 6.0 at some point. The truck will be used for towing (still within the stock rating) and I've been having a tough time trying to understand which combo would be best.
@rhbdssfky23 ай бұрын
1500hd had them
@antoniomarquina24513 ай бұрын
Hey sir can I put 275/55/R20 on stock suspension? I have rn LT265/55R16
@Stan1le3 ай бұрын
Can’t say 100% but on stock suspension I can imagine there is plenty of clearance so no issues
@BRED232 ай бұрын
Yes my rims I bought came with those tires size and they fit in stock
@brycelight13 ай бұрын
thanks man!
@kingskam69933 ай бұрын
So you saying that's electric is it a motor or engine
@Stan1le3 ай бұрын
Who really cares?
@jonspink40354 ай бұрын
Thoughts on an lq4 with 243 heads, truck Norris cam, tbss intake, 50lbs injectors, 1 7/8 long tube headers? That is my planned build.
@MrGabegambale4 ай бұрын
Dak prescott son out here killing shit lol
@Stan1le4 ай бұрын
Man I’m sorry but that’s probably the worst comparison I’ve ever seen. Also I would prefer not to be compared to Dak’s mediocre ass
@alanmaciel354 ай бұрын
i just installed a complete engine from a zl1 into my SS same year as yours, will the transmission need a tune or some work to make it work with a zl1 engine. I have a 8 speed auto
@Stan1le4 ай бұрын
Well I would have recommended a different converter for starters. You can make the 8 speed work but it depends on what you have done with the harness, ECU, and TCM. Basically you need a high level tuner to make it all work depending on the electronics as I mentioned. Your average local tuner won’t be able to handle all the electronics
@559bryce-4 ай бұрын
How did you do the heat exchanger pump ? Did you use the same harness that was on it or the lt4 harness
@Stan1le4 ай бұрын
Using a Whipple pump with the Whipple harness. The factory one it’s worth the effort. You cannot use a full LT4 harness without MAJOR changes and even then it will be difficult to work
@559bryce-4 ай бұрын
@@Stan1le so as of right now on my lt4 swap . The guys who pulled the motor cut the lt4 harness . So what im doing is using the 8speed trans with the lt4 , the lt4 ecm . But the same lt1 harness and same tcm . I couldn’t run the 10speed without getting a whole new harness plus I didn’t think it would do much of a difference in the 1/4 mile. Only issue im having is with the heat exchanger pump is there’s no where to plug it into the harness , so I have to somehow give it power and a switch , and the 2 map sensors need to be extended to fit .
@Stan1le4 ай бұрын
@@559bryce- well yes that is one way to do it; mine is not a direct LT4 swap so I had to make it all work but keep it simple. Like I mentioned I didn’t waste much time with the factory pump since it wasn’t plug and play for me anyway.
@luaelpeluquero98924 ай бұрын
Did it need a retune afterwards?
@Stan1le4 ай бұрын
Yes 100%
@bigb5894 ай бұрын
Do you happen to have the part # for the gm fuel line to an adapter by any chance i couldnt find it?
@rickybellamy81914 ай бұрын
Stan I'm looking for a cam similar to what you're running. You had the 224r, now the Titan 3, do they both drive pretty good? I'd imagine the Titan 3 makes more power with the 4* exhaust split. I'm leaning towards the Texas Speed 228/232, will this be too much for a truck? I've never built a heavy vehicle before, I've always raced/built 3200 lb foxbody mustangs. Thanks for your input. Looking for midrange and decent top end.
@Stan1le4 ай бұрын
For the best of everything that 224r cam was pretty good! It's just at the beginning of the "mildly aggressive" styles so it maintains the driveability the most. My setup is optimized for the Titan 3 so it works well but if it wasn't optimized I doubt I would enjoy it as much.
@rickybellamy81914 ай бұрын
@@Stan1le Stan thank you, exactly the information I was looking for. I think you could not have said it better.....looking to be on the brink of aggressiveness with some really good drivability. I like your Titan 3 cam specs, I've had my eye on the BTR stage 4 Truck cam which is a 224 / 230 duration cam.
@bobbywilliams56574 ай бұрын
Great job keep on trucking my brother 💯💯💯💪💪👍
@jimmyramirez88445 ай бұрын
Any issues with ac system
@SonicH62655 ай бұрын
Your a good man! Don’t let the negative Nellys get in your head… Do your thing and stay positive! Wish you well man!!
@regsmith76045 ай бұрын
Stan, stop wasting your time thinking 🤔 about what he say, she say, and they say. Do Stan! You’re a gearhead. Being a gearhead is your happiness. Working on your projects are your peace of mind. I had to move out of California, all the way to Colombia South America to get my peace of mind.