Why is it only 260bhp stock . Is the ah3 not 335 bhp
@DAVO3FAZE5 күн бұрын
@@erictucker8267 that's a question for bmw
@erictucker82675 күн бұрын
@DAVO3FAZE reason I ask I've had my car in for remap and because the power is not 335 bhp on my ah3 they won't map it as they says it lost power somewere. But can find nothing wrong... looking at others they seem to stage 1 at near 400bhp. Mines is reading 270bhp standard.
@DAVO3FAZE5 күн бұрын
@erictucker8267 I don't know anything about your car or your workshop. 260 wheel HP is standard for all AH3's as they are torque limited by the base maps. If you know how a dyno works its really easy to get any number on the screen. Mine are real numbers and I even show the datalogs at the end of the video.
@erictucker82675 күн бұрын
Cheers for getting back @DAVO3FAZE rare car here in scotland not now to much about them .just when u read the spec seemily 306bhp with help from battery to make 335
@DAVO3FAZEКүн бұрын
@erictucker8267 I also thought it would receive alittle boost from the electric motor up high at peak Hp. But I'm guessing its hitting gearbox torque limits. Fun car tho super responsive. I'm slowly disableing modules to help it skid and drift.
@jakobjordaan250719 күн бұрын
Well done, txs
@ryanscanlan-greig384Ай бұрын
How do youbadjust the boost? Is it just with the fuel pump screw?
@DAVO3FAZEАй бұрын
Of you turn the radiator cap alittle tighter you can usually get a few extra PSI. Make sure your on the dyno and keep ya EGTs in check and load it up on steady state.
@rpmwrxАй бұрын
Thanks for posting this vid. It was a huge help. Saved me heaps of time trying to locate the front diff, transfer case and gearbox stock breather locations. 👍🏻
@DAVO3FAZEАй бұрын
Nice work mate, glad you got some good gains on ya rig.
@ActiveBeamerАй бұрын
How’s the ah3 coming along? I’ve just recently made mine full bolt on 🏎️
@DAVO3FAZEАй бұрын
Good I love the extra power but I'm disappointed that bm3 and no one else support custom roms for this platform.
@youknowitsmetheone2 ай бұрын
Lets protect the metal with flammable paper towel... Glad it worked out but definitely didnt make any sense lol
@DAVO3FAZE2 ай бұрын
Gg
@herpderp16622 ай бұрын
They rub, you dont get full suspension travel and articulation, their heavier, their more expensive, harder on the drivetrain, lower fuel econ, slower acceleration. Ford are not stupid, they did their proper research putting 33s on from factory.
@DAVO3FAZE2 ай бұрын
You can use a raptor to do groceries or drive it off road. I drive it on extreme off road and have had great success on multiple vehicles with beadlocks. Some people like 33s and others like 35s. Each to their own.
@theodorecendejas13432 ай бұрын
What gas octane did you use. And what hardware mods?
@DAVO3FAZE2 ай бұрын
BP98, completely stock car.
@jasonquarsingh30022 ай бұрын
Does dyno mode have the electric motor running
@DAVO3FAZE2 ай бұрын
Yes
@LuuZilla2 ай бұрын
engine setup? how much hp you make and hows it been holding up?
@DAVO3FAZE2 ай бұрын
It blew up was running on 3 cylinders. Got stock type x motor pon cams 2871 making over 300 on 1 bar healthy for the last year.
@LuuZilla2 ай бұрын
@@DAVO3FAZE ahhhhh dammmm, what caused you to blow up?
@DAVO3FAZE2 ай бұрын
@LuuZilla cylinder 4 ring clearance too tight and siezed in piston. Was a forged motor built by a workshop by previous owner. Such a waste block cracked between cylinders so it was a proper mess.
@LuuZilla2 ай бұрын
@@DAVO3FAZE sucks to hear! 😅plan on building up mine too with a g25-660 and sleeves
@DAVO3FAZE2 ай бұрын
@@LuuZilla good Turbo, it will shred.
@nicholasjames94272 ай бұрын
Where do I get this Turbo conversion kit?? Website??
@DAVO3FAZE2 ай бұрын
google 1hz DTS, many online shops will send them to you.
@JUANCTOBON3 ай бұрын
Hello, is it possible that you can help me with the references for the roof bars? I have NOT been able to find which reference fits perfectly. thank you!! You have a very pretty raptor, these days I'll show you how mine is looking.
@DAVO3FAZE3 ай бұрын
Hi mate there rhino roof racks and the vortex model.
@LachoLarrinaga3 ай бұрын
Ok , cómo podría obtener esta explicaciones en español
@mattym00593 ай бұрын
You should sell these when I had my tub I was looking everywhere for these!
@DAVO3FAZE3 ай бұрын
I almost got a tray but at the time there was no radar kits and I didn't want to mess with the 360 cam. I miss having a tray but this setup is the next best thing. It will look better when I paint it.
@bvelite73213 ай бұрын
Im running 35's with no spacers, not cutting needed. I do have a 2' spring in the front though, and getting shocks revalved.
@DAVO3FAZE3 ай бұрын
Thanks mate, alot of people are running your setup I wanted to do things differently. My live valve system is operating at oem spec and the spaces make the wheels fill the guards perfectly.
@nicholaswicks307712 күн бұрын
Hey I want to run your same setup are you having any rubbings at full steering lock?
@Slidee4 ай бұрын
Hey just slapped the exact turbo on my 1hz. I havent touched the fuel screw im pretty scared to. At around 3k/3.2k it hits psi 5. Im not running a intercooler. I just got a egt today and havent given it a good run. U recommend i turn up the fuel?
@DAVO3FAZE4 ай бұрын
Did you rev it to 3 k without a tune?
@Slidee4 ай бұрын
Fuck quick reply. Yeah brus 0 fuel adjustment I live in the bush so can't get to a real place to get it tuned
@DAVO3FAZE4 ай бұрын
@Slidee haha that's wild nice work. If you look after you HZ it will live forever. I don't know anything about your motor/pump etc but if you adjust your fuel screw no more then I did its a safe amount. Monitor egts very closely the first few times you load it up and you will be fine.
@Slidee4 ай бұрын
@@DAVO3FAZE cheers appreciate your time
@gesswerk22364 ай бұрын
Getting back into work mate??
@DAVO3FAZE4 ай бұрын
I'm trying not to work too much. I just installed the toolboxes so I could mount a roof top tent to it.
@justinmah15464 ай бұрын
Hey Mate, great video, love the editing and music. Its nice seeing someone keep the OEM look of the guards and mud flaps. Heard quite a few people run into issues with tie-rods with low offset wheels, do you plan on driving this thing hard off--road? Sweet Truck and Silvia!
@DAVO3FAZE4 ай бұрын
Thanks mate, I don't have clearance issues with tie rods yet and yes this rig will be heavily abused off road soon. I'll have sliders, bullbar and winch soon then I'll take it off road. I'll definitely pack spare tie rods and cvs when going off road.
@q8fly.4 ай бұрын
Great informative video. I just need gas struts for the bed
@justaboutanything89734 ай бұрын
have you tried offsetting them to -15?
@DAVO3FAZE4 ай бұрын
I have replaced this vehicle with a raptor and use -50 spacers. Its perfect.
@kaukongmin1734 ай бұрын
Can I ask for louder tyre noise on highway using mud terrain tyre?
@DAVO3FAZE4 ай бұрын
They are not as loud as a cheap tyre but you can still hear them like any 35" I think they sound fine definitely not a issue for me.
@teamrja68875 ай бұрын
where did you buy the brackets mate?
@DAVO3FAZE5 ай бұрын
Hey mate from GMF's website. There's a few different types depending on what your planning to mount.
@twentyfoursyc5 ай бұрын
Where abouts did you get the beadlock rings from mate? Pretty exxy through Ford hey.
@DAVO3FAZE5 ай бұрын
Yes mate they have a massive raptor tax on them and I got them from my local ford dealer. Had to come from the states took months.
@bajadesigns5 ай бұрын
Love the Lights 🏁
@zdenekp16035 ай бұрын
Seems like the stock breathers are located at sufficient height?
@DAVO3FAZE5 ай бұрын
Depends on how deep water crossings you do but yes better then alot of other Ute's.
@craigzee365211 күн бұрын
@@DAVO3FAZE how much extra height has adding the kit you installed given? thanks
@DAVO3FAZE11 күн бұрын
@craigzee3652 they are all at different heights, at least 300mm.
@craigzee365211 күн бұрын
@@DAVO3FAZE thanks for coming back to me
@lisawilson32535 ай бұрын
It looks like it’s rubbing on the suspension. Am seeing things? I was hoping to put these on my Ranger sport
@DAVO3FAZE5 ай бұрын
Only the inner weights rubbed which I relocated. I ran these wheels for over a year on the wildtrak no issues. There now my main wheel on my raptor.
@mkivst1805 ай бұрын
if modifying mud flap necessary without using spacer ?
@DAVO3FAZE5 ай бұрын
The mud flap is standard you will have inner guard clearance issues pending Offset of rims with 35s. Most people don't use mud flaps but I wanted to.
@mkivst1805 ай бұрын
@@DAVO3FAZE i remember seeing someone run 35 and close to 35(315) without hacking needed. might be tire profile is diff then.
@DAVO3FAZE5 ай бұрын
@@mkivst180 I showed the size difference between metric and imperial sizes in the video as my cruiser has the same tyre in 315/75R16 I wanted to run real 35's with proper offset on the raptor. You can probally get away with stock guards if you run tyres around 34" with stock offset.
@neilgouws14385 ай бұрын
Thanks for the content. It looks like you painted your fenders. Can you please explain which paint products you used? Thanks
@DAVO3FAZE5 ай бұрын
Hi mate I used zinc it as I had it laying around because I use it at work for exposed metal cuts. Any metal sealing paint from your local car part shop will do tho it doesn't need to be anything special.
@TheTurboadict5 ай бұрын
Is the lug pattern 6x139.7?
@DAVO3FAZE5 ай бұрын
Yer mate PCD has not changed.
@TheTurboadict5 ай бұрын
@@DAVO3FAZE awesome we are just going to get these in the USA so want to buy some by the time it gets here
@harryridley27145 ай бұрын
Hi mate Is the 1hz still going strong with this kit ?
@DAVO3FAZE5 ай бұрын
Yes mate super strong. Will do a review video one day and put it back on the dyno for comparison.
@harryridley27145 ай бұрын
@@DAVO3FAZE yeah awesome bud , I’m just about to pick up my new 2001 hzj78 with 230k on the clock so future turbo plans will be in full swing , was worried about so many disaster story’s but I think that’s mainly from guys just running to much fuel an boost through the old donks
@DAVO3FAZE5 ай бұрын
@harryridley2714 you nailed it. People crank the boost and diesel in way too much and then get confused why things melt. I highly recommend a intercooler I noticed a massive difference after adding it.
@harryridley27145 ай бұрын
@@DAVO3FAZE yeah copy mate , cheers for the info , legend bud 🤙🏼
@chickenclips5 ай бұрын
Nice video thanks mate
@DAVO3FAZE5 ай бұрын
Thanks mate
@idrissma25556 ай бұрын
Can you show without spacers
@DAVO3FAZE6 ай бұрын
It's in the video multiple angles
@idrissma25556 ай бұрын
Oof didn’t watch the whole thing 🙃
@markives52196 ай бұрын
Hi I also have the beadlock rims on my raptor. Are you going drive with the beadlock as on? I’ve been told it’s not street legal
@DAVO3FAZE6 ай бұрын
@markives5219 hi mark, I'll only be using them off road and in Mexico.
@Andrew.yamoah7 ай бұрын
Tomei or hks cams?
@DAVO3FAZE7 ай бұрын
Tomei pon cams FTW
@Andrew.yamoah7 ай бұрын
@@DAVO3FAZE256?
@mitchpolycracks12347 ай бұрын
Hi Davo, I’ve just fitted the raptor wheels to my xls which I had the wildtrack wheels on them. I’ve fitted the raptor wheels on now and when I’ve spun the front wheels the balancing weights have caught and now haven’t fallen off. Any help would be much appreciated Thanks
@DAVO3FAZE7 ай бұрын
Use balance weights that stick inside the rim instead of being clipped to the outside. Alternatively use Hubcentric bolt on spacers but this may not be legal depending where you live.
@tyzon008007 ай бұрын
Like watching grass grow
@DAVO3FAZE7 ай бұрын
Pleuropogon oregonus
@qualityquartz46908 ай бұрын
Nice , looks real clean how much for that bad boy cost ya
@Venom-nk8nd9 ай бұрын
🇵🇬🇵🇬,,,,
@Jet1337x9 ай бұрын
How much torque?
@jmurrow79 ай бұрын
Cheers for the vid bro, I'll be putting some on mine now
@user-xr4im3ou3s10 ай бұрын
hola, soy de argentina, te pregunto si con la suspensión standard las llantas beadlocks entraron y no tocaban en ningún lugar, porque tengo una XLS y le quiero poner tus mismas ruedas!
@DAVO3FAZE10 ай бұрын
Hola, sí, esta es una suspensión completamente estándar y las ruedas tienen bloqueos de cuentas de un Ranger Raptor de próxima generación. El espacio libre es reducido pero lo he usado durante más de 6 meses sin problemas.
@francodellavalle76442 ай бұрын
Hola, otro argentino con la misma duda! lo hiciste ya?
@stormsurfing10 ай бұрын
Just done this to mine. Super close to the uca but doesnt rub at all. How close is too close?
@geraffgurung10 ай бұрын
No scratch no lift needed and is it safe can i use same size tyre on my next gen ford ranger xlt
@DAVO3FAZE10 ай бұрын
I've tested these wheels on a wildtrak and raptor not a xlt.
@sefveloria385110 ай бұрын
Have you tried it with 35" no lift kits?
@DAVO3FAZE10 ай бұрын
Yes
@willemdekant252210 ай бұрын
Looks very nice and snugg fit. What is the off set on these rims. Can't seem to find it anywhere. Even my FORD dealer couldn't tell me haha🙄
@DAVO3FAZE10 ай бұрын
Hi mate they are 2022 factory ranger raptor beadlock rims. Same Offset as wildtrak rims just alittle wider.
@willemdekant252210 ай бұрын
@@DAVO3FAZE Tx bro. I'm running the standard OEM 255/55 R20 tyres on 20"x 8" rims with +55 off set. I only have as you say in your video 12mm clearance on the stub axle. How much cleaerance do you have between tyre and UCA?
@DAVO3FAZE10 ай бұрын
@willemdekant2522 I don't have the wildtrak anymore I have a raptor. But from memory there was plenty of clearance with 33" no scrubbing anywhere including the control arms.
@willemdekant252210 ай бұрын
@@DAVO3FAZE just to fully understand which RAPTOR rims you were using. So were these the NEXT GEN RANGER RAPTOR rims?
@DAVO3FAZE10 ай бұрын
@willemdekant2522 that's correct mate.
@tyzon0080011 ай бұрын
Sandra sully with the late news
@jamoyme447511 ай бұрын
Hi did you lift the ranger?
@DAVO3FAZE11 ай бұрын
With tyres yes, suspension is all standard
@striff Жыл бұрын
Thanks for posting. I have a Raptor coming end of this month (11 moth wait) and Ford themselves would not or could not even tell me the current wheel offset.! And could not find any solid information on it, can't get more proof than on the wheel itself.
@DAVO3FAZE Жыл бұрын
2easy mate. I've had my new raptor for a month. Unreal machine. I'll make some good content on it.
@masterroshimagazines4354 Жыл бұрын
Did you get that idle just from installing the cams? How much hp this car?