4 ай бұрын
4 ай бұрын
7 ай бұрын
Пікірлер
@EnduroAmerica 9 сағат бұрын
I'll take an aluminum brush at for sure! Weight is key on an overland rig. Can't wait!
@RangerDogTraining 8 күн бұрын
Can you lock the door from the inside and unlock
@RangerDogTraining 8 күн бұрын
Can you open the door from the inside . Also able to lock them from the inside?
@Uneek637 9 күн бұрын
I love this setup and cant wait to see one with a canopy style access through the box. Need a bigger canopy to fit my little ones with me though.
@Dirtboxoverland 9 күн бұрын
Its in the works!
@BeakNC 12 күн бұрын
Terrific design and very well configured as shown. Regarding the 3rd Gen Tundra, is there a mod that allows you to view the truck box with the trucks built in camera without obstruction?
@Agtasa_Manga 13 күн бұрын
That's a weird location. Where you place the ladder for the tent.
@peopleschamp7258 11 күн бұрын
He uses the roof platform as a deck hence the opening of the tent and location of the ladder
@GevoA1 14 күн бұрын
For the CV joints, look into Teraflex. They make high ankle CV joints for the Jeeps. You may be able to make it work.
@idrvplanes 22 күн бұрын
Im good with (clears throat, uses English accent) aluminium!
@astrogreenarrow 23 күн бұрын
That be cool and difference but what would the price be more because of it ?
@davematthews255 26 күн бұрын
Terrific video mate , plenty of helpful & detailed info for someone very interested in purchasing . Cheers
@marksharman8029 29 күн бұрын
Keep it up mate. This is a solid vehicle, and therefore a good start.
@Dirtboxoverland 22 күн бұрын
Thanks, will do!
@jaykrup4113 29 күн бұрын
When will these be available for purchase?
@Dirtboxoverland 22 күн бұрын
Very soon!
@rickmoore9953 Ай бұрын
Went to Purchase a topper for my Chevy truck, online it says it won't be ready til December 24, 2024 then it'll be shipped. Crazy to have to wait months for a topper. Then I went to get the drawer system, don't have it for the Chevy Trucks. Bummer
@032254855 Ай бұрын
my uncle got the quatermaster and we did a winter trip a couple weeks ago nothing to hard but there were alot of ice in the puddles some puddles were just up to the front bumper maybe 3/4 the way up the tyres the quatermaster was never the lead vehicle so didn't have to brake through the ice but it still got a lot of damage to the small grills on the wing of the factory bumper and the gray bash plate below the winch acted like a funnel and broke the mesh and left a lot of damage on the radiator i am sure the same thing will happen in thick mud holes not grate if you plan on using them on harder tracks.
@SaltShack Ай бұрын
The question is are tracks the new 40’s. Seriously I had more fun and went everywhere I wanted in my 1980 CJ 5 with a 151 four cylinder GM and 33’s.
@Dirtboxoverland 22 күн бұрын
Yea, we actually agree with you :)
@SaltShack 22 күн бұрын
@@Dirtboxoverland Thanks. Great Channel. Can’t wait to see what you do for the Grenadier winch mount!
@grumpymonkey Ай бұрын
Aluminum please
@user-ii8zo1jt6v Ай бұрын
😂❤❤❤❤❤
@user-ii8zo1jt6v Ай бұрын
❤❤❤😂
@ccnbc1299 Ай бұрын
Aluminum bar please !!! Great proportion on the mock up
@Dirtboxoverland 22 күн бұрын
Thanks!
@MrDwaynePoff Ай бұрын
Rambox versions???????
@BryanPike Ай бұрын
Wow... easy 9 out of 10 on the look and build of this bar! Totally burly to match this beast. Large diameter looks great!
@Dirtboxoverland 22 күн бұрын
Glad you like it!
@steveallan3306 Ай бұрын
Great solution for mounting the tent. I like the fact you are using the existing load capacity of the roof, upgrading the side bars and keeping everything low profile. The awning mount is the neatest I've seen as well. Good work 👍
@Dirtboxoverland 22 күн бұрын
Thanks! 👍
@OverlandAddict Ай бұрын
I LOVE the look of the tent hanging off the back! It looks like a small spoiler. Killer!
@Dirtboxoverland 22 күн бұрын
Built for speed!!!!
@jesmor3 Ай бұрын
More fuel range let’s goooooo!!
@NigelNaughton Ай бұрын
That tent design sense is amazing with all the quick add-ons. Way cool!
@Dirtboxoverland 22 күн бұрын
It really is!
@johnverzi5783 Ай бұрын
Brush bar: yes, sliders with steps: yes bumper/winch: yes Extended fuel range YES (Hurry up)
@Dirtboxoverland 22 күн бұрын
We are trying!!! hahah
@oriondaniels4760 Ай бұрын
Awesome stuff! Thank you for bring up potential issues with a transitional lift. I don’t think this was addressed by anyone else. Any potential for a front sway bar disconnect? I’d have no issues with a manual disconnect.
@Dirtboxoverland 22 күн бұрын
Glad you enjoyed it!
@artandsoundsociety5419 Ай бұрын
The question is if it’s a matter of weight, it’s not that big of a difference but if you keep adding stuff that is heavy and steal, it becomes an issue so then you would want aluminum if you think you’re gonna futuristically keep building on it but aluminum is the way to go no rust Leslie and you did a good job with the bumper looks bad ass how much is one Just raw no pain
@Dirtboxoverland Ай бұрын
Thanks for you input! We really appreciate feedback. We are still working out the details ands will let you know!
@noahwilliams7200 Ай бұрын
any plans to do a roof replacement like Alu-Cab is working on?
@Dirtboxoverland Ай бұрын
Not at the moment...
@jeffreyscott4564 Ай бұрын
I think you nailed the RTT kit. Sliders look great
@Dirtboxoverland Ай бұрын
Thanks!
@willito1211 Ай бұрын
Portals are CRAZYYYYYYY expensive
@Dirtboxoverland Ай бұрын
We are going to do our best to keep them affordable! We are testing them for the Jeep platform as well.
@willito1211 Ай бұрын
I need the roo bar immediately
@jackscorpion4334 Ай бұрын
Cool setup but my only issue and the same applies here in Oz is that all wedge style RTTs have their main entry in the rear so when you add a 270 awning it renders that rear entry useless. Then to enter the RTT you've got to go through a side window and most don't have adequate weather protection. I don't understand why manufacturers of RTTs aren't addressing this because the 270 awnings are fantastic. I like the look of the hoops on the factory bumper and your rock sliders.
@Dirtboxoverland Ай бұрын
Thank you for your feedback! Yes we have actually turned our tent around and then turned the front roof rack into a little deck!
@kenhowto Ай бұрын
Great stuff. Portals, you hinted at extended range tank (?), etc. stuff I wanted to do on my 2002 GWagon, but they're all scarce, foreign sourced, expensive parts for a dying out vehicle. Looking at the Grenadier, if you make this stuff available will be much more appealing. Also I don't want mall cruising parts, want actual engineered function that works, Keep it coming!
@Dirtboxoverland Ай бұрын
We are doing our best! We don't even like malls ;)
@loum.4377 Ай бұрын
You certainly did some serious work here. It looks fantastic. I can’t wait to see what else you’re gonna do.
@Dirtboxoverland Ай бұрын
Thanks for the kind words!
@user-yv8kd2jo2x Ай бұрын
This is the most exciting and rugged setup I've seen for the grenadier. Well thought out, over engineered and simple to use. Perfect. Can't wait to see what's next.
@Dirtboxoverland Ай бұрын
Thanks so much!
@icerich11 Ай бұрын
Everything Titanium will be great, can you guys make one?
@Dirtboxoverland Ай бұрын
Maybe? Not sure at the moment.
@icerich11 Ай бұрын
If you guys can make me a titanium one, that will be great! I like light weight as possible
@BundyToo Ай бұрын
Great RTT set up & look forward to seeing you Portals.
@Dirtboxoverland Ай бұрын
Stay tuned! Thanks!
@willito1211 Ай бұрын
Aluminum for sure! Without a doubt
@Gripen047 Ай бұрын
It's pretty neat that you were able to forgo using a roof rack. Considering the size of a lot of wedge-style roof top tents, there's practically no space left on a roof rack for additional cargo, so this is a nice rethink on the necessity of a rack.
@Dirtboxoverland Ай бұрын
Yea for sure!
@stevegreen101 Ай бұрын
Originally, the roof strips were solid rubber but somewhere along the line they transitioned to hollow plastic mounted by a series of plastic clips on welded studs. Between the fixings there's a lot of lateral movement possible. I seriously doubt making them load bearing is a good idea. I can see two things happening, one, the plastic rubs away at the paint finish, and two, the spot welded studs bend and eventually break. Happy to be proven wrong. The rest of the items look great and looking forward to seeing them in production format. Finally, wasn't there an idea to relocate the bumper wing radiators to some less vulnerable?
@kcw9313 Ай бұрын
looks backyard garage hacky sorry
@jasoncouch2480 Ай бұрын
it’s not powder coated yet.
@floofy117 Ай бұрын
It's literally not a finished product. The guy is just showing what they're BUSY working on
@vicksss8324 Ай бұрын
Dude these are prototypes
@samuelwotring633 Ай бұрын
Should have shown more
@Dirtboxoverland Ай бұрын
hmmm....
@macairtuber Ай бұрын
create a tent like the Intrepid Geo and you win
@deepdiver155 Ай бұрын
wish you could do a custom color orange fabric
@marmite1076 Ай бұрын
I would look to get the front corner bumpers beefed up to protect the two small radiators in the front. I've seen two videos where the corner was damaged taking out the radiator + pipework. Both cars needed towing to a workshop to get repaired.
@garym51124 Ай бұрын
So structurally whats different from the topper and the camper. Is the topper able to support a rtt as is. The website doesn't really have a build me feature to customize
@garym51124 Ай бұрын
Ive been looking for a smartcap alternative for my 3rd gen frontier pro4x with no luck...then i found this. Finally a place to start
@Rider.WhiteHorse 9 күн бұрын
Did you get one?
@garym51124 9 күн бұрын
@Rider.WhiteHorse still searching options
@Rider.WhiteHorse 9 күн бұрын
@@garym51124 any new offerings?
@GIRONA-OVERLAND Ай бұрын
I want this with the steps.
@stevewessels2562 2 ай бұрын
Make one for a 93 Ford Bronco
@Dirtboxoverland 2 ай бұрын
We have a custom canopy camper option ;)