Absolute garbage. Camera (phone) never still. All over the place. No idea where the camera is pointing. Put the phone to one side and leave it alone.
@citysewing5 сағат бұрын
Hi ! Sorry getting better at recording !
@SanaeMaass11 күн бұрын
This was so helpful! I’ve been watching some of your videos over the last year and really appreciate you taking your time teaching us how to work on our machines 🙏❤️
@MomAsol11 күн бұрын
Thank you so much! This is very big help
@missvidabom14 күн бұрын
Thank you so much for this! I've been researching for hours trying to understand why my machine is having issues! Everywhere said the basic stuff and none of it was correct. Oh, it is just the tension, threaded wrong, etc. etc. No one suggested TIMING! Thank you!!
@maricelamendez324715 күн бұрын
I have one problem I reve this because The fabric presser didn't go down and I didn't know, I adjusted it but it didn't come back to normal.
@timgidney318917 күн бұрын
Awful machines. The only thing heavy about them is the sticker on the front.
@tech.curiosity21 күн бұрын
the plate is bended cz user was pulling the fabric from the back, it bends the needle whitch hits the plate.
@karina117221 күн бұрын
Thank you sooo much finally found how to fix my problem!! I just need the right screw driver for that little screw. Looks like a star?
@masterlabel23 күн бұрын
Disappointing and a waste of time for viewers.
@carolynwalker58023 күн бұрын
A you tell me why my viking ruby overheats? I barely used it.
@charliedeloach122224 күн бұрын
I love how clear your directions are, but I can’t find that screw on my Baby Lock Aria. Can someone tell me where to find it?
@rildopilcochoque818125 күн бұрын
Buen video, me hustaroa saber cual es la potencia y torque del servomotor, gracias!!
@citysewing24 күн бұрын
Hola. ! 550 - 750 -1000 hay Diferentes torque depende la máquina que vallas a preparar !
@jackielimongelli485627 күн бұрын
Thank you so much for this video. It has been a life saver!
@ivystephanotis28 күн бұрын
Thank you so much! I was gifted a singer heavy duty machine before I went off to college by my bosses after I left the store and I just got this problem this past weekend. I spent the entire day trying to figure out what to do and how to fix it because I have an action program project due this Thursday and if I don’t finish it then I won’t be able to take it home with me. THANK YOU THANK YOU THANK YOU FOR THIS INSTRUCTIVE AND INFORMATIVE VIDEO!! You just might’ve saved me some time and money from repairs and the chance at me getting to keep my project! 😊
@maryreimer805529 күн бұрын
Please Please!!! Slow down for us newbies!!😂
@kimknight634Ай бұрын
How about a video on how to fix the timing on A SQ9285 Brothers
@snyyngАй бұрын
thank you for this video. it’s nice to know i bought a good machine (in FL). could you demonstrate how to repair or replace the needle threader? there is a wire loose on my machine’s needle threader.
@citysewing5 сағат бұрын
Hi sure next one comes in I will do keep you post it. Thanks you does your nice comment !
@kezzy160469Ай бұрын
Thankyou Thankyou Thankyou from Australia🇦🇺🇦🇺🇦🇺 I pulled my machine apart to clean it and I couldn’t get it to work. 4 times of putting back together and still not working. Found your video and it was brilliant. My brother is working again after the 5th attempt. Yay. You are awesome. I live in a valley and nowhere near a shop and this video actually saved me financially and let me get the machine working again . 🙌🏻🙌🏻🙌🏻😃👌👌👌💙💙💙
@IndyTeAmaАй бұрын
Thank you for this video!! 😊🙏
@ankitagajbhiye1507Ай бұрын
My god♥️♥️♥️♥️👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻 you just save my money. Thank you soooooo muchhhhhhhu may god give you long and healthy life♥️
@aliciapatel3195Ай бұрын
Saying again your amazing, fixed my singer 507 myself thanks to you and all your videos. Will make maintenance so much better and then it can do a professional service once a year as needed 🎉
@kereissaka7004Ай бұрын
Cool
@kiesha7939Ай бұрын
Where can ii purchase the sensor?
@dee-anneguartuche3262Ай бұрын
Thanks so much! I cleaned my XR1355, but when I put it back together the error code E1 came up. I watched your video, and even though it is not the same, I understood the process you explained enough to find the trigger and fix my machine. :)
@danielr.schafer9504Ай бұрын
Nice job! My mother inlaw has a similar machine VIKING Husqvarna 980, do you have a video on the model with a tune up procedures?
@bradshymon8012Ай бұрын
The instruction is wrong! 🤦🏻♂️
@FynbosGardenАй бұрын
Punk video
@FynbosGardenАй бұрын
Waste of time. You might have well shaved your face for all i learnt
@desireefigueroa2915Ай бұрын
Can you do a video on how to replace the clamp? It’s broken on mine
@TheJuniper366Ай бұрын
This tutorial saved me $89! So simple! Thank you!
@ahmedislam1026Ай бұрын
Best teacher
@annawadiaries7348Ай бұрын
I have kinda trouble in my needle position, it doesnt work, would you like to help me
@lindacusick3386Ай бұрын
Thank you. I’m having an issue and am going to try to fix myself.
@aliciapatel3195Ай бұрын
This is an old post but I am ever thankful for you. Thank you so much for helping a newbie to fix her own machine x❤
@johnmay5341Ай бұрын
Do you still read the comments thank you
@johnmay5341Ай бұрын
I took my designer 1 today to clean.. my bobbin still not letting me know to replace. Do you know what else it could be. It letting me know when my spool is
@janmadin130Ай бұрын
Thank you so much Doc. I operated my machine successfully, thanks to your guidance. 👍
@roszhartАй бұрын
You repeatedly emphasized the importance of having the needle in the left position, but failed to show how to move the needle’s position. You told someone else with the same issue to use the positioner, but I don’t know what/where that is located. Also finally saw comment that you have a video about removing a bobbin case. Would have been helpful to mention that.
@Zeeen1600Ай бұрын
How do you prevent the machine from going off timing
@mattmeckel992 ай бұрын
Thank you!! ❤
@PebbleBeachCorolla2 ай бұрын
Awesome video. Very Clear. I have a Singer CG500 which is probably a 1990s machine. On the underside there's no peep hole and no obvious way to loosen the shaft. Any chance you can share some tips on the bottom side? Lots of folks seem to want to know. Many thanks. Your blessings are stored in heaven!
@maureencox9832 ай бұрын
Where can I get the adapter/attachment plate that the binder actually attaches to? I have juki MF-7923 and I never got any kind of a plate like that.
@jean-marcgillioz68462 ай бұрын
Magnifique le réglage du crochet. Merci beaucoup
@ve5ku2 ай бұрын
My wife’s sewing machine had a problem that it wasn’t sewing properly. Problem was somewhat similar to the example in this video. But was a bit random, meaning a few stitches might come out right but then again not. I disassembled the machine and noticed a bit of fabric lint/dust on the circuit board attached to the transparent plastic parts that presumably read the rotation of the synchronizer using a photocell principle. I removed the lint and with a quick test, the problem seems to be gone, I’m waiting for my wife’s feedback. So, could the lint have slightly interfered with the photocell’s operation? The part presented in the video itself seemed to be in good condition.
@Bocachula672 ай бұрын
Hello, where can I purchase this binding foot. I have that exact same cover stitch machine.
@Rokspaaider2 ай бұрын
good day, i have an Elna Excellence 740. giving me an "E1 Error". i cleaned the machine everywhere - the bobbin had a crowsnest tangle which i removed and cleaned - had a bit of resistance when turning the wheel manually. oiled the shafts etc and no resistance anymore. still error persists. was told perhaps the fuse has blown took it out from the power supply unit, tested it, and it works fine. so now i am up in arms. any advice would be greatly appreciated. thanks in advance 🙏
@lizarodriquez93672 ай бұрын
I don’t think I have the screws for the plate that attached to the smaller under table, help
@TheLoveNotesInNature2 ай бұрын
Thank you so much this was really helpful!!!❤❤❤
@citysewingАй бұрын
You're so welcome!
@smyrna1122 ай бұрын
What a garbage video why would you label it how to service it and not actually show how to service it? Also now that I’ve looked at your other videos they are the same garbage! Clickbait CRAP.
@ElectroManHDTV20132 ай бұрын
Hi, can you make video how to remove the plastic covers please