have you heard of lovfen top loaders? what do you think of those?

What did you end up doing with them? How much did that box cost you?

you should do one of these with aliexpress sleeves

I bought some top loaders and they’re so scratched. Are they all like that? Is there scratch resistant top loaders?

cardboard gold and ultra pro ftw

Some thick beckket ones would be perfect for what Im going for thanks

Great video, I was looking for a video like this just for clear sleeves. I'm going for those Dragon Shield clear, thank you!

Thank you so much for this review! I always use Titanshield because they’re seem less and imo they’re the highest clarity but like you said they are the most expensive but I’ve got some expensive cards I’m trying to protect. You should do a review on toploader binders because you did a good job with this video and I’m curious if there is a clearer display on these binders than what I have. Just a suggestion! Thanks again! 😁✌🏼

Is there any toploader which isnt bluish in color?

Thanks for this!

good video but same complaint as the toploader

not really any good ones

Disappointed that you didn’t compare prices. Also it would have been better if you used each brand for a few months and then reported back so an update video including prices would be good. also the video was very long I think you could have edited it down more. I will watch your penny sleeve review next. Lastly you didn’t have the brand ai most wanted to see a review on, Card Shellz.

And Diamond one

Personally I like Ultra pro

Have to consider the brand standard/default smallest POINT thickness as You had one that was 35PTS and other that was 20PT. If you are boxing them in the a Top loaders box that holds them, How many fit will be affected. I bought some generic ones and they were so thin and cheap, I had to stretch each one so when I inserted the cads they would not be damaged and forced in. Some others I bought had a small piece of plastic on the entry corner maybe from when they were molded were not cleanly done, so the card's corner could be damaged if you push them in and it hits that plastic piece. Thanks for the review.

Love your video. Got my sub! I just got into collecting Pokemon cards and your videos were super helpful!

Many Thanks for this, appreciate the small details Magnetic/Screw down case review next ? 😎

I've used BCW, they're okay.

What about Ultra pro platinum toploaders? Are any of these on par or better?

I noticed at 4.15, when you show the other card with the ultra pro sleeve, it has the holographic circle at the bottom right, but the sleeve on the pokemon card does not. Are they the same type of ultra pro, but one is an older version? Or is the one with the holograph the premium sleeves? I'm wondering because I love the ones with the holograph at the bottom and been wanting to order some online, but can't remember which ones they are. Thanks and great review!

Every ultra pro top loader I've bought recently have had dust and plastic debris in the top loader. It is annoying and I worry if I put my card in it will damage or scratch/dent from being in the top loader with the card. Thanks for the review because I'm looking for new top loaders.

If anyone wants to try the thick card version of beckett or ultra it all I use mainly cause sometime the tighter the sleeve if u take them in and out a lot will scratch it sometime but mainly when u put them in sleeve u never clip the edge corner on the opposite side of the card when it goes in which is nice never worry bout nicking a corner I see it happen alot get a lil white chip on back of Pokémon it sucks but ya try them oversized is all I use in cardsaver1 saver bag and boxed or sleeve and put in the black side load binders the clear ones won’t fit the sleeve but the black sleeve side load binders are great no d ring

Are the pro safes identical to the ultra pro?

Thanks for the review. It would have been good to know what material each is made from; PVC, etc.

So I watched the entire video but never found you actually rank the toploaders...

Great video thanks !

thanks for the effort ! helped a lot

i usually just using ultra pros but they ALWAYS come a little bit dusty but i just tell myself "it's not made specifically for viewing it's for protection" but yeah, i feel like they do perfectly well just not great in how clean they come.

Do you know the difference between ultra pro premium and ultra pro platinum top holder?

Did they all have that "blue" tint?

I always sleeve anything i unpack, even commons. A pack of 100 ultra pros only cost 1,50 euro here. The reason why i do this., is because i like to keep the cards nice. And 1,50 for 100 sleeves is dirt cheap. Anyway nice video!

Very helpful. Subbed

Have you compared the UP Regular vs Platinum?

the dragon shield you bought it not dragon shield's penny sleeves but their regular sleeves and it is one of the best sleeves for play usages

You are the only person I’ve seen that has even mentioned becketts toploaders. Thank you so much! These are the only toploaders that I’ve found that are PVC free, and actually made out of PETG and archive safe materials. I’m glad to know they are good :)

Packaging for top loaders needs some innovation, that is for sure... another awesome video!

such a cool video... i just posted a video of some of the products that my company will be producing to be available soon. Most of the sleeves are all coming from the factories near Shenzhen, that's where we are and lately after visiting the factories it is clear that most of these brands are coming from the same factories. The only difference is that the factories have level A, B, C and so on products. It is all about what quality you want. Higher quality manufacturing = higher prices. I learned a lot from your video and thank you

dragon shield is the best i use it for play only

Your review is a tremendous help to the card collecting community, and is greatly appreciated! ✌️😊

Ultra Pro actually makes 2 seperate product lines of top loaders... those red ones are the cheaper option, which is why they have the word "regular" written on the front. The other line is called "platinum" and supposedly are clearer than the "regular", while also less reflective of outside light, and produced with slightly tighter tollerances. (The 35pk doesn't say regular even though they are, bc they were intended to be sold in places that don't offer more than 1 other size of top loader. i.e.; Walmart, Target...) Thanks for taking the time and spending the $ to make the video! P.S. some of those top loaders don't say PVC free, which may be slight overkill, but I still avoid any brand that doesn't state PVC free. PVC free penny sleeves are an absolute must though. Off-gasing is real!!

There is no such thing as a "penny sleeve".

Thanks for the info. I have a question tho, I noticed a ton of sleeves, regardless of what brand I use, that have like these dots in them, like if a grain of sand got in them or something and imprinted the dots through out the pack, and I feel like those can with enough time mark the cards you intend to protect... any thoughts? Thanks

Thank you for the review! I'm planning to ship more than 1 card in a penny sleeve. How many cards can fit in 1 Cardboard gold penny sleeve and how many cards can fit in 1 Pro Safe penny sleeve? I'm hoping that each brand can hold at least 15 cards in 1 penny sleeve! Thanks for the info!

Which toploader & soft sleeve do you personally use?

I really didn’t need to see this since I only buy BCW and Ultra Pro myself. They are for sure the go to. But I am trying to find out which top loaders are good the this patch cards the thicker card stock. So if you can plz let me know on the size to get for those thicker patch cards plz and thank you 😊👍🏽

The ToupeOnes look like they are in a whole nother league of Their own just ahead of BCW... Their UV protection is top notch... And the penny sleeves that come with them I have found to be one of theee best out their, but their top loaders are super expensive... $59.99 for 200 top loaders with 400 sleeves... What did you find the 100 pack with penny sleeves for $? Because for $16-$18 you can get 100 count of the cardboards which is a great deal but downside is they can break more easily, so I tended to not bother with them...

The Monster Pro-Techs 100 count I would have liked to have seen in here as they come with a protective peel away coating on both sides for $29.99... the ToupeOnes I bought a 200 count with 400 sleeves too and they are great as well, and their penny sleeves are great qualityvsleeves (better than the Monster Pro-Tech sleeves which crinkle and feel like cigarette pack cellophane) but for $59.99 they are way too expensive for 200 loaders when you can get 1000 top loaders with penny sleeves for $80-$90 from cardboard gold... Only thing is I would've liked to have seen the durability test on all of them...

I got a bcw pack of top loaders and it was terrible. It was super dirty and there was hair in it and it was not clear at all

Best clear card protector review on youtube