Always love watching these videos and seeing all of the cool hot rods being built.
@AlanGreen-m6cКүн бұрын
Is my hood like that one
@Spiritcarsinc12 сағат бұрын
I thought you just had a hood top and no sides I will look at your paperwork. B.C.
@dougthegoldenoneКүн бұрын
Another great video. As always nice to see progress. For those that read the comments, I used to be one of the dream creators at SPIRIT. it really is a great place to build dreams. Their products all get that personal touch. I would recommend SPIRIT to any one looking to get a new car built or a DIY kit.
@vvxtrucking5366Күн бұрын
Looking good!
@TimmyAcucoin-mn2bpКүн бұрын
The red t looking good. Get it done.
@BilStavrosКүн бұрын
Hi Bob: The no name 23T has a name. I had you build the car as a TRIBUTE to my brother in law FRANK. Frank was handicapped and suffered from epilepsy, I was hopping to have the car ready for him but he left us to soon. So the no name " T " has a name " Tribute car " to Frank . I'm sure he's looking down and smiling and saying to us I want The FIRST ride.
@BilStavrosКүн бұрын
Hi @TimmyAcucoin-mm2bp: Thanks for the post. I apologize for sending you a reply that was meant to go to Bob.
@TimmyAcucoin-mn2bp4 күн бұрын
Very nice. Custom. Keep it up.
@mikeyoung10414 күн бұрын
Insanity is looking good. Nice craftsmanship boxing and rounding the front of the frame. Very smooth looking, custom touch! It’s all about the details!
@DarrellCatt4 күн бұрын
AMEN BROTHER..
@ronaldolweiler77454 күн бұрын
Put a Ford engine in it you don't have those problems !
@scottstemen40604 күн бұрын
Good luck Snapper
@waynesimcox78914 күн бұрын
i thought they were supposed to sit higher then that.what about your shocks .mine would hit the bed.
@Spiritcarsinc4 күн бұрын
The design on a Spiritcars T bucket allows for shock clearance
@harveydalrymple53434 күн бұрын
That's RIP'S T
@Spiritcarsinc4 күн бұрын
Got it
@vvxtrucking53664 күн бұрын
Get that education, boys!! Cool paint shop, pretty hard to beat HoK. Shop is nice and clean.
@DarrellCatt4 күн бұрын
PPG...GREAT STUFF!!..
@peacemaker61565 күн бұрын
Each one is unique. A handcrafted 1 of a kind. The italians built testarosa in a old foundry. Like what yall are doing here. These dont come off a assembly line in detroit. You can put side pipes on it even if it hairlips the pope.
@smilingskull78276 күн бұрын
Lose that fu#cking ridiculous hat.
@peacemaker61566 күн бұрын
You can call my model A chitty chitty bang bang lol. On a backroad i passed a red barn with big white letters saying... No work No eat. Thats biblical.
@Spiritcarsinc6 күн бұрын
Not sure which model A belongs to peacemaker. So for now we have the mystery Chitty Chitty Bong Bang.
@peacemaker61565 күн бұрын
@@Spiritcarsinc Hello from west tn. My order numbers are 905 cab and 909 rolling chassi. I look forward to meeting you. As grandaddy used to say... we will crack open a keg of nails. Lol
@camcutcnc6 күн бұрын
Hi, for the most part the younger generation doesn't want to work period. A good first step is smash all the cell phones, then they might be able to focus and pay attention. I build complete cars like you. I have a nephew, all he can do is blow cars up and part them out. If you look at new cars they all look alike because there is one shape that is aerodynamic enough to get good mileage. I can see the benefits of computers but the older I get the simpler I like it.
@vvxtrucking53667 күн бұрын
100% correct. No work order, no go. No work orders, good time to run some PMs, and spot check inventory.
7 күн бұрын
Like who stores CD's now a days. No offence by all means
@Spiritcarsinc7 күн бұрын
I still have all my 8 tracks
@TimmyAcucoin-mn2bp7 күн бұрын
Looking good. Don't forget ac and alt fab. And rear fenders. Before paint
@Spiritcarsinc7 күн бұрын
We are on it.
@vvxtrucking53667 күн бұрын
Ms. Behavin is inngrat hands!
@DarrellCatt7 күн бұрын
need some small rubber block for wet sanding...
@Spiritcarsinc7 күн бұрын
On a fiberglass mold with 600 grit it’s optional. But someone with little experience sanding on a high end paint job I would have given him a sanding block. I might get out several different kinds of block’s next time we wet sand to show how they work. That is part of the reasoning for the trifold on the paper to wrap it around a foam block. B.C.
@beverlyannshepard96917 күн бұрын
Better❤ fenders
@mikeyoung10417 күн бұрын
Blue Bayou is looking good! Seat frame should be delivered in 3 weeks. Y’all got things rolling at Spirit! Thanks for the update.
@beverlyannshepard96918 күн бұрын
What is s doc box and why does it cost so much ?
@Spiritcarsinc7 күн бұрын
@@beverlyannshepard9691 they are boat dock locker box’s. We produce some of the best quality box’s on the market and have several styles.
@v8trikebyers7568 күн бұрын
One day when I make it to the USA I should come see you for a job. I got 13 years experience in the composites trade. And I love building fibreglass hot rods
@Spiritcarsinc8 күн бұрын
@@v8trikebyers756 glad to talk to you.
@vvxtrucking53669 күн бұрын
The mold shop is really looking good. Snapper is going a good job. The mold repair is quite interesting.
@Spiritcarsinc8 күн бұрын
The Snapper is doing a GREAT job. He just s the next generation we need.
@alangreen66289 күн бұрын
my paint should be there,it was ordered when i was last there, in May,
@highst3719 күн бұрын
It is good to see a ford motor in a ford. Anything else is blasphemy.
@alangreen662810 күн бұрын
my car is to hav hood,top and sides
@Spiritcarsinc10 күн бұрын
We are going to start fitting them up soon now that the firewall is where we need it. First we will install the steering rack.
@alangreen662810 күн бұрын
HAPPY BIRTHDAY<<<LILLY
@alangreen662810 күн бұрын
all parts to build a car
@alangreen662810 күн бұрын
hes making a sign for outside of building to show,what kind of services are in this car shop,parts shop
@scottstemen406010 күн бұрын
Maybe we can get together for dinner or something with Jesse when you come to Indy this time
@Spiritcarsinc10 күн бұрын
It will be a quick trip but let’s try.
@TimmyAcucoin-mn2bp11 күн бұрын
Nicest people I've met.
@TimmyAcucoin-mn2bp11 күн бұрын
Happy birthday lilly
@harveydalrymple534311 күн бұрын
I hope that's a rolling chassis for my t kit
@vvxtrucking536611 күн бұрын
That's correct, BC. Door poppers only, no outside handles. I've got some parts accumulated as well. Gauges, wiring harness...
@vvxtrucking536611 күн бұрын
HAPPY BIRTHDAY LILLY!!!
@DarrellCatt11 күн бұрын
HAPPY BIRTHDAY LILY!!
@mikeyoung104111 күн бұрын
A lot of good stuff going on at Spirit. Several unique cars (dreams) being built. Excited about mine, but also anxious to hear Tim’s fire up and see Arnie’s in the sun. Keep up the good work!
@mikeyoung104111 күн бұрын
Happy Birthday Lily!
@scottstemen406011 күн бұрын
Go Snapper
@TimmyAcucoin-mn2bp12 күн бұрын
Nice work
@beverlyannshepard969112 күн бұрын
Can hardly wait to see the Midas touch series 😊😊😊😊😊😊❤❤❤❤
@beverlyannshepard969112 күн бұрын
We talked last year about building the Bare Bones 23 t bucket that we would start when yall finish the midas touch. Hope yall remember
@wby34012 күн бұрын
Thanks for taking my deposit for my Blue Blown 540 Hemi 23T! I'm glad I got there to meet and talk to you guys about my dream a few weeks ago! As we talked, I am well aware of the time to complete, not only with the car, but also the engine builder. Like you said in this video, you can't do 100 hours of work in 20 hours. I'm just so happy to see my dream coming true, now matter how long it takes! Thank you all for being a part of it! Bryan C.