8 ай бұрын
8 ай бұрын
Пікірлер
@sarajcory7425 2 күн бұрын
I just finished assembling this loom the Ashford 16 shaft 32 inch. So excited gonna take a couple days off before I get the warp ready but thank you for the wonderful videos.
@tm13tube 5 күн бұрын
When starting to sew thicker fabric I put a roll of paper, cloth at the bag of the seam height to keep the presser foot level to prevent odd thread tangling at the height jump.
@pringlesnotman7016 6 күн бұрын
This is absolutely satisfying
@lucykavanagh2240 7 күн бұрын
How does it switch the over-under for the material?
@tm13tube 5 күн бұрын
feet on treadles … heddles are tied to treadles notice she throws the shuttle close to the reed treadles are foot pedals that raise or lower the heddles Heddles are rectangular frames with a vertical string or metal with a hole in the middle to feed the warp thread through. Shuttle carries the weft or crosswise thread. Reed, on a floor loom the warp threads are front to back. They feed through the reed and the reed moves forward and back to pack the weft threads in place.
@RenaissanceEarCandy 7 күн бұрын
Is it difficult?
@rosarojas2585 10 күн бұрын
Como sellama este trlat? Marca? Y donde se consigue?
@rosarojas2585 10 күн бұрын
Perdón, cómo se llama? Marca? Dónde lo puedo encontrar?
@rosarojas2585 10 күн бұрын
Como se llama este telar? Donde se consigue?
@rosarojas2585 10 күн бұрын
Que hermosos telares!!
@sarajcory7425 16 күн бұрын
Yes please
@sarajcory7425 16 күн бұрын
So excited, I just ordered mine
@kawarthaweaving 12 күн бұрын
Congratulations! How exciting!
@AjayMaurya-6364 28 күн бұрын
Bro I am from india and i have hand loom
@AjayMaurya-6364 28 күн бұрын
Bro i am from India and i have hand loom
@melissalemmons549 Ай бұрын
I just read a book set in late 1700s London about a silk weaver's family. They use a draw loom to make figured silks. I'd never even heard of a draw loom prior to reading that book, so I was so confused about why it required two people. One to work the treadles, throw the weft, and call out the draw cords needed to the assistant who would pull the cords. Watching videos like this one are helping me understand the process a bit better.
@kawarthaweaving Ай бұрын
That’s awesome!! I’m so glad it helped!
@devanshinihaniwal3985 Ай бұрын
What software are you using?
@kawarthaweaving Ай бұрын
I’m using iWeaveIt
@SebsebeBabulo Ай бұрын
Waw i like you vidio
@SebsebeBabulo Ай бұрын
Your mashin my feverit
@SebsebeBabulo Ай бұрын
Hello my name is sebsebe i live in 🇪🇹 Ethiopia my work is ethiopian tradithonal dress please help me
@carthagodelenda Ай бұрын
I love this sentiment.
@kawarthaweaving Ай бұрын
Thank you ☺️
@kawarthaweaving 2 ай бұрын
How I Sew Hems on Handwoven Towels… Yesterday I shared how I pinned hems, today is all about machine sewing them. I start about 1/2” in from the edge. My machine is a bit fancy and does a knot (not necessary). Then I reverse stitch back to the absolute beginning and give a gentle nudge to the fabric to sew over the bulk going forwards again. The main sewing part was awkward .. I was sewing while looking through the camera and straddling the tripod … how on earth do people record these things 😅 I sew right to the end, then reverse stitch about a 1/2” then complete with a fancy knot (again not necessary)… you could just reverse again a few more stitches to secure. I can’t recommend a walking foot enough when working with handwoven hems!! A walking foot has an additional set of feed dogs (from the top) that help grab and march the fabric through, working with the feed dogs below. Think alligator 🐊 having a snack 😜 🤓 For Those That Want To Know: This sewing machine is the Janome MC 6600P and it includes a built in walking foot (AcuFeed System). If you aren’t sure, bring your sewing machine into a reputable shop and they can help fit a walking foot for you. I sew hems on handwoven cloth before it’s wetfinished. I don’t measure and I don’t iron! (See yesterday’s post to see how I pin the hem) This is a hand towel woven with Brassards 2/8 cotton. Threading is straight draw on 4-shafts with a sett of 20. Treadling is horizontal herringbone. I wove them on an Oxaback, Ulla Cyrus, combination drawloom, set up for single harness … to practice before I attempted double harness 😳 #weaving #handweaver #handwoven #handweaver #handweaversofinstagram #sewinghandwovenfabric #sewing #slowcloth #kawarthaweaving #janome #janome6600 #handmade
@MrsGogo 2 ай бұрын
Your work and the colors you chose for this piece are beautiful. I would love to have a loom like this but for now on my budget I stick with my lap loom and Zoom loom plus some my hubby makes. Happy weaving! 🧵🧶🕸️
@kawarthaweaving 2 ай бұрын
Thank you so much!! I also really enjoy pin loom weaving 😁
@MrsGogo 2 ай бұрын
@@kawarthaweaving I find it highly relaxing, once I get going on it my fingers just fly over the loom in such a soothing way.
@-kryzx- 3 ай бұрын
Where exactly are you situated in ashford and btw you can be vague as i live there
@kawarthaweaving 3 ай бұрын
I have absolutely no affiliation with Ashford whatsoever. I purchased this loom with my personal money and my opinions are my own. Hope this is what you are asking??
@-kryzx- 2 ай бұрын
@kawarthaweaving lol sorry I thought u were someone else !!
@irmabotti6795 3 ай бұрын
Hermoooso !!!❤
@annaeriksson5065 3 ай бұрын
Wow! If only! What a dream!
@stevemichael8186 4 ай бұрын
What software are you using on your tablet?
@kawarthaweaving 3 ай бұрын
IWeaveIt
@jasminerosewater3891 4 ай бұрын
wow!
@azadhussain23 4 ай бұрын
Can you make the design that I will show
@kawarthaweaving 3 ай бұрын
Not sure exactly what you are asking? Sorry
@mehmetcansen1 4 ай бұрын
It is almost robotic 😅
@kawarthaweaving 3 ай бұрын
Only because I’ve done it a bazillion times 😅
@lynnsessler8196 4 ай бұрын
Mesmerising!
@Razique8097 6 ай бұрын
Silver textiles Super 👌
@kawarthaweaving 5 ай бұрын
Thank you ☺️
@AnimeShinigami13 7 ай бұрын
i wish looms like this didn't cost so much. My own primitive frame looms are much slower.
@kawarthaweaving 6 ай бұрын
All my floor looms are second hand! Please check your local buy and sell groups.
@Hofberaterfuchs 8 ай бұрын
I would like to see a video where you show what you do when the yarn on the heddle is empty halfways. I just started to dig into that art and it's something i wonder about. Do you knot on one side or do you leave it.. ^^
@kawarthaweaving 8 ай бұрын
Sorry, I’m not exactly sure what you are asking … are you asking about setting up the loom? Or actual weaving?
@Hofberaterfuchs 7 ай бұрын
@@kawarthaweaving while weaving. You put yarn on the heddle and somewhen it's empty. Do you just leave it loose?
@spartyonhaji 8 ай бұрын
I just warped a 480 ends baby blanket, so I can relate. what software are you using to keep track of your draft and weaving progress? I was considering iWeaveit for iPad.
@kawarthaweaving 8 ай бұрын
My main program is Fiberworks, but it’s not mobile. I use iweave it to track threading and treadling on my iPad, while I’m at the loom.
@spartyonhaji 8 ай бұрын
thanks for posting the video. That's my dream loom...
@kawarthaweaving 8 ай бұрын
It really is a pleasure to weave on!
@JudithMarieMoran-ik1cv 8 ай бұрын
So cute the penguin socks!
@kawarthaweaving 8 ай бұрын
Haha thanks 😂. My studio is above the unheated garage so I need cozy, warm socks!
@JudithMarieMoran-ik1cv 8 ай бұрын
Lovely loom.
@kawarthaweaving 8 ай бұрын
Thank you, it really is a pleasure to weave on.
@gailwilson7878 8 ай бұрын
Thanks. I'll try it. Have mostly heavy shuttles that are great with other looms. That would be very freeing.
@tobywyman6843 10 ай бұрын
omg this loom and your piece are both so beautiful
@kawarthaweaving 8 ай бұрын
Thank you so much ☺️
@ellenblack5376 10 ай бұрын
Looks like a nice shed. Are you using a slim shuttle?
@kawarthaweaving 8 ай бұрын
It’s a really nice shed ☺️. Yes, I’m using Leclerc slim shuttles.
@gailwilson7878 10 ай бұрын
Does that loom have a race on the beaterh? How do you manage to use the shuttle, rather than a stick shuttle?
@kawarthaweaving 8 ай бұрын
There is not a shuttle race. It takes some practice, but it’s doable. Consistent warp tension, properly wound bobbin and very deliberate shuttle throwing. I also use a slim shuttle.
@spiritusmentis Ай бұрын
You can also make a race for it using a cross stick. Take the cross stick and tie it against the reed at the end holes (to the wingnut that's behind the reed that secures beater head). There's an article somewhere showing you how to do it, should be ready to Google.
@neeajak 11 ай бұрын
Hi, could you please tell me what application you are using for your pattern on your tablet?
@robg8720 11 ай бұрын
IWeaveIt with the in-app treadle purchase
@youwishyoucouldbestie 11 ай бұрын
I'm so sorry for your loss
@dianarosamartinezguerra2036 11 ай бұрын
Where did you get that?
@kawarthaweaving 8 ай бұрын
The loom?? It’s the Ashford 16-shaft table loom. They have a list of dealers on their website.
@beth1979 Жыл бұрын
Beautiful colours and design. Also you’re so quick at reading the pattern!
@kawarthaweaving 8 ай бұрын
Thank you! 😊
@craftdesigneditsleeprepeat5624 Жыл бұрын
I have 2 questions. 1: What was used to number the shaft levers? 2: What stand is being used to hold the iPad above the loom and how is it attached? Thanks
@kawarthaweaving 8 ай бұрын
I made the numbers out of vinyl with a Cricut crafting machine. I purchased an iPad stand from Amazon. It just sits on the top of the castle.
@craftdesigneditsleeprepeat5624 8 ай бұрын
@@kawarthaweaving thank you
@JimmyVasquez1 Жыл бұрын
What app/program are you using on the screen?
@robg8720 Жыл бұрын
Looks like iWeaveIt with the possible in-app purchase of Treadle Tracker
@Charmander603 Жыл бұрын
This is so satisfying to watch
@kawarthaweaving Жыл бұрын
Thank you so much! 😊