Mine rattles like crazy over 70 mph any suggestions
@Coyotemike3022 күн бұрын
I'd say grab some extra clamps and clamp it. Mine never rattled at all.
@spookypew2 күн бұрын
Is there any noise when you drive, I read a few other reviews that say when they hit 40mph it makes a noise
@Coyotemike3022 күн бұрын
Nope. Never made a noise.
@zacharygraham883411 күн бұрын
Truck is looking good man!
@Coyotemike30211 күн бұрын
Appreciate ya. It's getting there.💪🏽
@zacharygraham883411 күн бұрын
@Coyotemike302 mine has been out of commission for over a year now but my local shop told me Thursday they got my replacement engine! So Ready to get my truck back!!
@Coyotemike30211 күн бұрын
@zacharygraham8834 dayuuum. Well glad your getting back👍🏽
@elemen771311 күн бұрын
Were you get the roof market light at
@Coyotemike30211 күн бұрын
Ordered off of Amazon. Can provide the link if you'd like?
@elemen771311 күн бұрын
@@Coyotemike302 yes please thanks alot
@Coyotemike30211 күн бұрын
@@elemen7713 Partsam 5X Smoke Cab Marker Top Roof Light + 5X Amber T10 LED Lights Assembly Compatible with E150 E250 E350 E450 F150 F250 F350 F450 F550 Super Duty with Stock Cab Light 1999-2016 a.co/d/5a8E0kJ
@Coyotemike30211 күн бұрын
@elemen7713 here ya go👍🏽
@chandlercarter483516 күн бұрын
Now that this video 3 years old, how is the mammoth leveling kit holding up? Wanting to throw one on mine
@juanpablofloresluna845816 күн бұрын
When i open the engine oil cap i can see a lil bit of oil splashing out, what could it be? Should i be aware of it? I just bought a 2013 f150 5.0🥲
@Coyotemike30216 күн бұрын
@@juanpablofloresluna8458 nope. That's what it's supposed to do. 👍🏽
@BrunoB-b4n17 күн бұрын
Any one have an idea and I had an oil change done 2 months ago and I use full synthetic
@BrunoB-b4n17 күн бұрын
I have the same noise on my 5.0 ford f150 2016 but it's only at start up and goes away about 10 to 15 seconds later
@Coyotemike30217 күн бұрын
@BrunoB-b4n may be just the common coyote tik as they say. Mine did the same and escalated quickly. Hard to pinpoint.
@rudyguajardo70521 күн бұрын
Would this swap work on a 2010 4.6?
@Ricky-gr6uc24 күн бұрын
2022 5.0 with 11k miles does a noise similar to this but car has really never been abused wtf ford
@CyNinjaNikka25 күн бұрын
Tf is this
@Coyotemike30225 күн бұрын
@@CyNinjaNikka afnm
@weddingproceo29 күн бұрын
i have a 2013 lariat and the step handle is in the way from removing panel.
@Coyotemike30229 күн бұрын
@@weddingproceo all man. Is there not a way that you can work around that? Maybe detach and then reattach to get to the tabs?
@SmithsGarage199029 күн бұрын
I’ve got two skar 8s and they slam but wanting to add 2 6.5 400 watt skars have the video on my channel.
@LivinWith3MАй бұрын
Love those tow mirrors bro. Awesome install!!! 🤙🏼
@Coyotemike30229 күн бұрын
Thank you my brother. 💪🏽
@fatguy45Ай бұрын
Bro, as always, good stuff. Truck lookin great. I also like how you are always so detailed and thorough in showing everything you do to help your viewers get through the process themselves 💯
@Coyotemike30229 күн бұрын
Thanks greatly appreciated. Thanks for your following.
@ErickToscano2000Ай бұрын
👍
@MonsterFord04Ай бұрын
Love the channel man!! Got me a 2012 well iv had it for a long while.. quick question man what color spray paint did u use?
@Coyotemike302Ай бұрын
Thanks bud. I used black.
@derrick9439Ай бұрын
How did you set the red and blue? Looks nice!
@Coyotemike302Ай бұрын
Red and blue, you've gotta go to mode setting, and they are pre programed already.👍🏽
@derrick9439Ай бұрын
@@Coyotemike302 thanks! For some reason mine doesn't have the modes settings
@kanemeyer9963Ай бұрын
Watching this in '24. A 2+ year-long issue and I was able to fix it in 5 mins. 😭Idk why I didn't try fixing it sooner, but it was a great step-by-step video!👍
@Coyotemike302Ай бұрын
@@kanemeyer9963 💪🏽
@arabellacosta2865Ай бұрын
Omg i think i saw you at the 4th of July parade❤❤❤
@Coyotemike302Ай бұрын
@@arabellacosta2865 yep. That was ne🇺🇲🇺🇲🇺🇲
@arabellacosta2865Ай бұрын
Me and my friend where on the sidewalk waving and saw your amazing car my friend said she loved your tires with lights!❤
@Coyotemike302Ай бұрын
@arabellacosta2865 that's awesome. Glad yall liked it.
@paulcondie2520Ай бұрын
Do any burnouts with the traction bars installed?
@Coyotemike302Ай бұрын
Not as of yet. I'm planning a video on that here real soon.
@paulcondie2520Ай бұрын
@@Coyotemike302 I'm currently installing mine on 2017 Chevy Silverado 1500 with a 6" lift. Started it last night and thought I'd finish after work today but worked 12hrs! Lol. Looking like I'll have to finish on the 4th
@TonicofSonicАй бұрын
Ran my f150 coyote down to 2qts of oil when it suddenly started burning massive amounts of oil. 1qt every 250 miles. Sent it to the dealer who sold it and he sent it to a third party for "engine cleaning". Came back with a very slight knock. Stopped the oil burning though. Now 10k miles later the knock suddenly got much worse switching from pennzoil to the new valvoline clean and protect. Gonna switch back and hope the oil was the cause.
@Coyotemike302Ай бұрын
It's a flaw in the motor. Mine was a pita to diagnose. Got tired of the horrible ticking when at events and drive throughs. This by any means isn't a normal tik as Ford claims to be. Lmk how it turns out.👍🏽
@TonicofSonicАй бұрын
Paying closer attention the knock seems to come in a set of 4 knocks at a time, around 2 per second. Then usually a few second gap and 4 knocks again. Sometimes no knocks at all and sounds like a very healthy engine. No knocks ever above 2500rpm and one place around 2200 where it knocks under light load until around 2500 rpm. Seems to get worse with hotter oil, and hotter temps outside. I am almost sure this is something to do with timing or low oil pressure. Timing because it is inconsistent and low oil pressure because it happens at idle. I have also heard these engines can over heat the oil. Maybe I am seei g that which would explain the sudden difference in oil. Since it is hot out I am gonna throw in 10w40 Mobil 1 high mileage synthetic and see what happens. Then prib end up back with Pennzoil 5w 30 ultra plat for the fall and winter months. Will give update.
@Coyotemike302Ай бұрын
@TonicofSonic sounds like a good plan. Ya cylinder 4 and 8 do not get the proper lubrication in back and runs hot. Keep us posted. Hope it all works out for you.💪🏽
@TonicofSonicАй бұрын
Wow all that just for some roller followers huh Props dude you really took that on, that is one lucky truck. Has a good owner.
@Coyotemike302Ай бұрын
Thanks brother. Yep I had to see what the problem was. No mechanic shop would actually show me. Had to pit in the work myself.💪🏽💯
@TonicofSonicАй бұрын
@@Coyotemike302 Bro you handled it like a boss.
@Coyotemike302Ай бұрын
@TonicofSonic appreciate that my brother 💪🏽💯
@markanthony95062 ай бұрын
Lifter at the back of the engine.
@daveboemio2822 ай бұрын
The ol 5.0 coyote rattle. They all do that.
@user-wf2ty4wz6c2 ай бұрын
It’s been a while since this videos review. Thoughts today? Do you still have it? How’s it working?
@Coyotemike302Ай бұрын
I got rid of it. Worked fine after the new adjustments. I would definitely recommend it.👍🏽
@larrywhisman39612 ай бұрын
Its a mystery, mine makes a ticking noise, ive just decided to accept it and run it, when /if the engine fails, then ill fix it..atleast then ill know what the problem is..lol.
@Coyotemike3022 ай бұрын
Roger that
@eliosastudillo55072 ай бұрын
What tune/tuner did you use? Appreciate it.
@Coyotemike3022 ай бұрын
SCT 5star tuning
@eliosastudillo55072 ай бұрын
@@Coyotemike302 thank you!!
@kiloester13202 ай бұрын
link for that black grille ? at 12:03 in the video
@NoctiLucent812 ай бұрын
Hey Bro were did you have vacuum leaks? Thanks, nice video. Not my account. But i had to ask.
@Coyotemike302Ай бұрын
Purge valve.
@NoctiLucent81Ай бұрын
@@Coyotemike302 K, thanks!
@LivinWith3M2 ай бұрын
Awesome work bro. Rock light installs are harder than a lot of people think. Time consuming also, but well worth it seeing the finished product. Looks killer!!!
@mikekia71042 ай бұрын
Good work brother thanks for the video I'm planning to order some myself was wondering if they were bright looks good.
@Coyotemike3022 ай бұрын
Glad I could help💪🏽
@johntarpley66352 ай бұрын
That is piston slap if you hear that noise from the wheel well it's sure to be a piston slap
@fishtuationaqua2 ай бұрын
With it so heavy. Does this affect the mpg? Is there any noise when running? Thank you for the review.
@jermiahanton38613 ай бұрын
What are you running for oil in thus new engine? Weight and type. I just installed my 3rd 5.0 2012 and this time im trying 5w-30 instead of the thin 5w-20. They say these engines are tough but im not seeing it. Nice truck by the way
@Coyotemike3023 ай бұрын
I'm still running 5w 20 no problems so far. Thanks though👍🏽
@5564EVR3 ай бұрын
I checked the installations instructions provided by KSP and it states the adjustable end is located on the rear axle of the vehicle. Are you going to flip yours around?
@jeffmiller31503 ай бұрын
Oil passages blocked to a head, my 02 F150 had that problem, glue from inside the oil filter!
@daveboemio2822 ай бұрын
It’s the 5.0 coyote rattle. They all do it. Mine included.
@Halo9K3 ай бұрын
I’ll add to my comments. When I take the Mav through the carwash, a slight amount of water does get in by the tailgate. But not that much. It’s certainly not a major problem. For the $1,001 I spent on it, I’m very pleased with it. It’s a quality product that I expect to last the life of the truck. You can spend much more but I don’t think you’ll get a better cover.
@gomcse3 ай бұрын
Very helpful. Thank you.
@MustangGuru3 ай бұрын
11-14 f150 Coyote engines had an issue with sunken intake valves causing misfires. Compression check is a must. A low compression misfire
@JoePatrick-ck2ey3 ай бұрын
How did you mount the amp to the back wall
@randalflowers48723 ай бұрын
Your lash adjusters/lifters....mine does the same thing, mines a 2018
@Uranium21Ай бұрын
Where you able to fix by replacing the liftets?
@randalflowers4872Ай бұрын
@@Uranium21 the only thing I've done is switch to 5w30 oil, it definitely helped the ticking, but doesn't take it completely away..... ford will tell you the ticking is a normal operating condition but I can't see how that could be normal???
@ValentinArzola3 ай бұрын
Lifter tick. Common in Ford modular engines. Im assuming you have high miles on it. If there is no damage to lifters, you might want to look at using the correct weight of oil if you are using a heavier oil than recommended by manufacturer this can be part of the problem. Also, might want to look at upgrading your oil pump to highr pressure and volume. Melling i think offers an upgrade.
@blz4l705Ай бұрын
i put 5/30 if i go back to 5/20 will it possibly quit?
@TonicofSonicАй бұрын
@@blz4l705lol no
@jockosboy173 ай бұрын
I have the same noise. Hardly there when cold but much more noticeable when its warmed up. Was yours quieter cold?
@yohnny88393 ай бұрын
That’s a lot of amp for 400w rms. Lol
@salvadorsanchez61233 ай бұрын
Looks like that is a pain in the culo man but thanks 🙏🏻 brother
@claudiaohh8883 ай бұрын
Mine just started making that sound! What was the cause?
@Coyotemike3023 ай бұрын
That's a hard one. My conclusion was the timing tensioner guide. It was snapped in half in which led me to believe was the tic! But I didn't feel like dealing with it. So I just bought a new motor. Dropped a mustang ermine in it.
@jordansutton15113 ай бұрын
Next time remove the music. Super annoying.
@Coyotemike3023 ай бұрын
Concentration is key👍🏽
@TheManic.5-OH4 ай бұрын
Why can't you just replace the rod bearings and sand the imperfections(if there even is any) off the crank? The cranks are durable as hell on these things, ive seen multiple guys get away with doing this. You just drop the k member, drop the oil pan, and pop off the bearings, sand with paper and shoe lace, replace bearings, and presto. Rod knocko-nomore-o
@user-on4xi4jg5b4 ай бұрын
Just use 5w-30 Motorcraft synthetic blend and a wix or motorcraft oil filter