I bought the sharpening tool when I bought my chainsaw attachment and used it for the first time today. Set it up 30 degrees one way, 30 degrees the other way. Set the depth, Set the pitch had the job done ten minutes. Had no problem clamping it with two little clamps to my workmate. This is a delicate piece of equipment not something you shake and wob le about. It's done a fine job. I have been in engineering over 60 years and I think it's about time you called it a day giving out false information to people. All my power tools are einhell and ozito and don't have any problem with them and have 15 batteries that have come with them. Also your language is disgusting you need to get your mouth washed out with soapy water.

Was just about to buy one - but forget it! The main problem that stands out are the wheels being too small to go over small obstacles - will look for a compromise that folds together like this one, so I can stack it away inside my house - thanks GP

2000w ? roflmao 2x20-30wrms 4-8ohms. its 8/10 value for money but 2000w is criminal marketing

OK mate.

💚

the fact that it is loud means it is working.

my rgb dond work, i have hub all fan spin but RGB dont work??

help me

how do you rgb? i have one and all fan turn on but rgb dond work?

hey, I have a question where I can buy a 9002 x filter, I doubt I will find a new one that someone keeps in the garage, but used in good condition?

My RGB connector wouldn't fit either. I used a razor blade and tried the connector body down. Works well.

Just a question can you use passive speakers with the bottom unit the av-mp326bt Cheers

Pity your swearing spoilt the whole presentation!

It should be a steel that has a good amount of Manganese. The rock tooth that is. If the bucket tooth came from a very large machine it most likely will be as well. They should be forgeable, but I will warn you they arent weldable, or easily weldable that is. They were meant to be very tough and last for a good bit of time. When you realise what it is they do, it is obvious they arent made of these materials for no reason. The amount of pressure is designed to make the rocks they encounter yield to the steel.

The articulation is great for sanding the bottom of doors without having to take them off, but it is a bit underpowered.

Haha great vid especially the start ❤❤❤❤❤❤❤😊

The 3200 lumen spotlight, however, is awesome.

My go to soldering irons are the Hakko FX888D and My Milwaukee M12SI-0 Cordless soldering iron. Both have been fantastic albeit pricey. The Hakko stays on the bench and the Milwaukee is ultra portable and heats up in seconds from dead cold.

Great vid mate just a question do the force batteries suit the fusion charger that you showed in your vid ?

It's meant to be as light as possible. That's why it feels flimsy, but the helmet without the lens is just 50 dollars.

Came here for the review, subscribed for the Aussie version of AvE.

Appreciated, but you gotta show some edge to edge with it stopped down a bit to give some idea of what we're dealing with. You know...a chart...

Harga nya kokk GK d tampil kan

Im a manly man who loves cooking on fire Also Spends a huge chunk of the video whinging about 20 mins assembly

If you push the wire up into the connector then press the small latch and pull the wire out. You are correct sometimes they are a bit hard to get out.

This be a great video without the waffling

PC technician here of 23 years .. I recently was gifted one of these, maybe not this exact model but a very very similiar looking alternative (USB C charging, leds near the tip) and I was very skeptical, it does feel very loose, the tips aren't magnetic and don't hold screws well even after magnetising them (which was my main issue) and very occasionally when you try and turn something manually without pressing the button, if theres too much tension, it will stop the auto feature from working and you have to leave it for a short while before it allows the button press. However, on that note it is very usable. I addressed the magnet issue by taking a couple of the little rectangle magnets you get in laptop lids and popping them on the shaft just where the tip sits in and it seems to work spot on. Even though it is cheap and I use different tips (the same ones in the box that are in the video) I can't see myself not using it.

I know you posted this 3 years ago and have probably realized long before now where things went wrong, but just case you haven't, it's pretty obvious... You forgot to attach the 2 fans to the heatsink before powering up!

Also in FnQ mareeba there a bakery there that makes the best pea pie

thanks a lot

This was the best/funniest review I've ever seen. My wife and I were in tears. You're amazing 😂

Great now I’m going to return the small rig before it arrives should have seen this before ordering it

PMG linesman???............you are showing your age Bro.

2:55 LOL, thank you! You've made me realize why there are hubs without a case! i didn't like them, but now they make perfect sense due to this issue, I have read few reviews people have said on various hubs that the connectors are too big.

Still selling in Bunnings and I bought a smaller version of this and it has a mind of its own .. it cycles through the same brightness for many times and then the strobe comes on and will stay on ane won't go away .. I have no idea what it is doing to be honest. Think the electronics is pretty screwed up. Gave up, total wank job of a torch.

Effing terrified. There's nothing holding the block to the faceplate. Nothing.

Thanks for ur info on the izoto vacuum

there is an adjuster just below the handle bar, you rotate it anti closewise release it and extend the bar timmer and tighten it again!

well spoken

9.32 of my life wasted.

The only thing this fucking trolley does really well, is fold up.

when the battery's corrode (and they will corrode) you have F all chance of getting the bloody things out of torch.

I bought a 20L Ozito for cleaning the gutters. Excellent suction power. Just runs and runs. Got the job done. Very happy with the price and quality. 👍

Mate I needed a laugh. Excellent review.The truth.

You were cutting grass that you would use a mower to do, so it performs really well. I just need one for edging and awkward places so it would suit me fine.

just stumbled across your channel today gotta say far as tool reviews go bloody top notch had me laughing whilst getting good info! Legend.

Definitely bullshit on how it all works even the ark welding.

Mate stop with the stupid comedy routine. Crap video

I call the AEG thing a "Dakka Dakka"

Lmfao can’t agree more it’s not interface it’s fukface