You're supposed to rotate it the same way as the cable twist as you slide it. But you can do that with your fingers anyway. Then solder the end.
@oldbiker973910 күн бұрын
just cut the excess off lol
@jefferson457910 күн бұрын
No, you can’t turn the clockwise and then melt the end
@deanparker916018 күн бұрын
#SorryHeadphoneUsers 📯
@bushfire10625 күн бұрын
The key you chucked in the trash that was under the dash isn't meant to turn the ignition or locks, it's to ensure that if someone broke into the truck they don't have a key to start the truck.....
@moderate_performance25 күн бұрын
Oh. That makes sense. I think I'll chop up the grooves on the new key I put in that box
@bushfire1065 күн бұрын
I think you should be ok as there are so many of these trucks I'd imagine they are less desirable to steal 😅now I've said that someone will try! 😬
@fredoramirez672425 күн бұрын
Lowering my 4x4 expedition this video came in super clutch and made everything a lot easier to do/ understand 🙂
@moderate_performance25 күн бұрын
Glad it helped! What did you do to lower the rear on the expedition? Are those Coil springs in the rear?
@OleblueburbanАй бұрын
What is on the other end of the hose you tapped into the filler next that’s going into the grommet? Filter, nothing? I ask because my 87 burban with crate engine, sniper 1 charcoal can failed and with an in tank pump I can access the vent line at the top of the tank. Trying to sort out tank pressure management if I just put a filter on the end of the vent line or tap it into the overflow neck
@Orchha.BateshwarАй бұрын
what if we dont have this screw in the disc , will it cause any problem while driving ? please tell me
@moderate_performanceАй бұрын
It's mainly to hold the rotor in place on the assembly line. You do not need to reinstall if you do not want to.
@user-ld6pq9hf3i7 күн бұрын
@@moderate_performancethank you all my worry are gone since I went to hell and back with that stupid screw
@bradleyneuville3074Ай бұрын
Better for older transmission and manual,never worked for me
@fbbc64952 ай бұрын
Fx sounds awesome 👌
@LordMelchiahX2 ай бұрын
This is a great installation how-to thanks guys. Also that steering wheel looks super dope.
@moderate_performance2 ай бұрын
Thanks! Glad you liked the video!
@LukeOldroyd-fs7el2 ай бұрын
Does your ford need it to drive?
@moderate_performance2 ай бұрын
Nope. The previous owner didn't have the belt on it and had blocked off the appropriate things.
@sparkysparkyboomman45782 ай бұрын
What happens if I accidentally put this in my CVT transmission ? Someone please help
@natureman00742 ай бұрын
Just took one out with a screwdriver and the other side had to drill it out!
@moderate_performance2 ай бұрын
Sometimes you can get lucky with just a screwdriver. But if you live in the rust belt...
@jameslaiola49763 ай бұрын
Im Curious what catylitic converter is needed in exchange when doing this. My smog pump just went out too
@ronnieb8213 ай бұрын
What size tires are those?
@moderate_performance3 ай бұрын
265-70-17
@LifebyLeo.com8054 ай бұрын
Supercharger and nitrous should be next
@billyfast94654 ай бұрын
what size of tires you have?
@moderate_performance4 ай бұрын
The Harley wheels are the stock 275/45/20. Winter wheels have a 265-70-17
@randomgamer57835 ай бұрын
We will survive just another month we got this ive got a 97 saleen s281 and a 01 v6 mustang both are currently under a inch or two of snow 😢
@zuki8185 ай бұрын
Would that suspension kit work on a Ford expedition 98
@moderate_performance5 ай бұрын
The torsion bar keys 3933 work on it. The rear on expeditions looks like it's either a coil spring or an airbag setup. Might have to cut coils unless someone makes a lowering spring for the rear.
@MrBeny1275 ай бұрын
Sounds like his stomach is upset 😢
@traegonzales94705 ай бұрын
Any other pics or vids of it
@blackbearpowered85355 ай бұрын
hi! Have you had any problems with the upper arm ball joint tilt?
@Kate_Short-For-Bob5 ай бұрын
Are there dickheads that actually buy these ?
@f3ar0r6 ай бұрын
Excellent video! Being new to suspension systems, this was really helpful! I just had a 2/3 drop on my Lightning done and wanted to see how the hanger/shackle stuff worked so this was perfect! The 2/3 Belltech kit (921SP) ended up more like 2/4 and now it's lower in the back than it is in the front! :o
@ahmed223pin6 ай бұрын
I drained all the gearbox oil, and I put 1.4 litter into my yaris 2004. Lets see what happens
@erikgonzalez81646 ай бұрын
does the horn work ?
@moderate_performance6 ай бұрын
It sure does! The horn button has a good solid feel to it too.
@erikgonzalez81646 ай бұрын
thank you that’s all i needed to know i will order it right now just what i was looking for
@jasongerona25297 ай бұрын
Though it’s three years old, I really appreciate your video and idea about using the line from the charcoal canister. One concern I have is that return line has a a smaller diameter line running parallel back to the tank. Will that add to the return pressure and will it cause any cavitation within the tank? Lastly, Holley advises placing the regulator on the return line rather than the inlet; where did you place yours? Did you consider running the return to a “T” back near the tank’s primary line?
@moderate_performance7 ай бұрын
Our sniper unit is the original version of the Sniper. It has the fuel pressure regulator in the unit so no external fuel pressure is required on our setup. The new Sniper 2 uses an external fuel pressure regulator. I would install that pressure regulator on the return line like Holley suggests. The reasoning on that is if the pressure regulator fails, then you still have full pump pressure (which would be better than no pressure) As far as the return line goes, we haven't had any issues as of yet but I will say a dedicated 3/8 return line would be the best. There is less pressure on the return side which is why our setup still works.
@jasongerona25296 ай бұрын
Though I'm not using the charcoal canister's line, I am following your recommendation about a dedicated return line. Additionally, I vented the tank neck as you guys did; it's dicey any time you drill into a tank. Thanks for your help ;-)@@moderate_performance
@adamb14007 ай бұрын
This is soooo making me want to do an AWD Lightning clone!
@moderate_performance7 ай бұрын
You have our approval!!
@sergiorosas13112 ай бұрын
That’s exactly what I want to do since I have a 2000 single cab sort bed 4x4
@lmfar4278 ай бұрын
Very nice video. I'm amazed by the speed at which the leaf hangar mount rivets were removed. I tried the 'cut the rivet head then air chisel them off' method to no avail. I ultimately used the 'drill the rivet out' method in order to get all eight of them removed. Maybe on my 2002 the rivets were designed differently, but for certain the rivet removal was the most time-consuming part of my project. It appears the parking brake mount on the left hanger was not modified to account for the vertical change in thru-bolt mount position. Have you encountered any problem with the brake cable being out of alignment with the front brake cable housing?
@jonathanocegueda69948 ай бұрын
I just got the same kit I don’t know whey but it don’t look like a 3/4 drop because on my truck the front end don’t sit right it’s just a little to high what could be the issue?
3 ай бұрын
Did you ever figure it out
@jonathanocegueda69943 ай бұрын
Yep now it sits even
@moderate_performance3 ай бұрын
What was the issue?
@jonathanocegueda69943 ай бұрын
@@moderate_performance it’s because i did not adjusted the front bolts 🤦🏽♂️ but got it figure out the next day when i did the kit
@jeffalan63398 ай бұрын
My friend used it in his 08 Impala he drives it like a teenager. You could the trans getting hot yet still drives very well even though he drives the car hard
@anthonyadams67158 ай бұрын
Qestion if the u bolts was being changed out fornew ones y waiste time removing them way not just cut them at the bottom og the leaf??
@moderate_performance8 ай бұрын
That is a good point. I did install new u bolts. Never really thought about cutting off the old ones. I usually try and not destroy things taking them apart just incase I need them
@hbgriss8 ай бұрын
Someone is an anime fan.
@darryldickson43609 ай бұрын
Why not just use an electric pump with hose down the fill tube?
@Cerebro9609 ай бұрын
Hello friend, a question. As time goes by, mufflers change their sound???
@moderate_performance9 ай бұрын
They can, especially if they are mufflers with packing in them. The heat cycles and carbon build up can change the sound of the muffler over time. And if packing get blown out of the muffler, they really change sound levels lol
@Cerebro9609 ай бұрын
@@moderate_performance Oh God, brother, it's true, you're absolutely right. Thank you very much for answering me 👍😎
@Muxik4k10 ай бұрын
Can you use in manual transmission?
@Muxik4k10 ай бұрын
@@moderate_performance How many mailes you car had,? mine is VW CC with 70000 and has some small noise when shifting.
@christophertorres956810 ай бұрын
Can I put 16 inches rims with that kit
@beardaza872610 ай бұрын
It’s because it stops people stealing the carpet along with the kettle, pillows bedding shampoo and whatever else they get their hands on 😂
@TheJoshleonard9410 ай бұрын
Carpets in hotels and on public busses are designed to hide messes and stains...
@loucrappi586910 ай бұрын
I like that
@robertjones769511 ай бұрын
Looking good.
@moderate_performance11 ай бұрын
Why thank you!
@robertjones769511 ай бұрын
Wow, that's some dull driving scenery, I imagine the show was good.... enjoyed the video anyway.
@moderate_performance11 ай бұрын
We live on the praries of southern Alberta. Next car show we'll actually take some footage lol
@breezergym11 ай бұрын
I honestly just want to know how they look at that and go “hmm this will suit my hotel really well” and also where tf do you find carpet this ugly😂😂😂
@dib415211 ай бұрын
Yeah. I'm with you. Must be really cheap.
@thebuildersessions11 ай бұрын
"Yeah, I have my mom's Jetta. I'm gonna LS swap it." (Makes no sense) "Yah I'm gonna turbo it."
@TheBestYouthWrestlingVideos11 ай бұрын
Shade tree mechanic here: As good as Lucas Slip Fix is, it's just another bandaid. '76 727
@dabbler_of_many_things11 ай бұрын
I have the same setup but a flat steering wheel, not as close to me. With the quick release I think you need to use a flat wheel in the Mustangs. Ditch the torch for soldering, use a 35 watt soldering iron, much cleaner and quicker. You won't be burning up the wire insulation trying to get the solder to flow.
@moderate_performance11 ай бұрын
I actually like the steering wheel closer to me. This steering wheel is a 3" dish but they also have 1.5" dish steering wheels too. It's nice to have options to get the perfect driving position. I do actually have a butane soldering iron and I know I should I should use it more often.
@tardeliesmagic11 ай бұрын
I'm from the UK & this does work! A family member purchased a Honda Jazz without test driving it,the CVT was juddering when pulling off & less than 50 miles it went away!