This is seriously one of the best videos. The production quality is amazing! Also, after watching this, I think I've never had properly adjusted bike 😀

This is the best explanatory video i have ever seen. Well structured Informative visuals High quality 🎉🎉🎉

White background makes adjustment a lot more easier.

I love this video. It sure seems like they had a couple of pops before the director called "action."

I'd appreciate less poetry, and a more clearly visual presentation of where the G pulley is supposed to exactly be for proper adjustment

Compact

Greatest drummer period!👽👍👺💪love me some carcass!

Is there such a thing as an acceptable 'normal' average tension for the spokes in a basic 26" or 27" bike wheel with (say) 1.8mm steel spokes? Would 100kgf be too high? Would 55kgf be too low? What's a good figure to aim for? 75kgf, maybe? I'm not thinking about a super-high performance wheel that's going to be used by a pro rider and rebuilt every day; just an ordinary bike doing ordinary mileage, and set up for durability rather than peak performance.

Great saved me the money of buying three new parts

I fixed my son's 18 gear cycle just by seeing and understanding your video .. 🎉🎉So easily demonstrated...Thanks...

I have to ask because you fail to mention it, which is the l screw which is the h? You point out how to adjust but you don't mention which one is which.

I watched a few of these Park Tool videos and unfortunately because of the choice of front camera angle used, the guy’s hands obstruct what he’s doing a lot of the time at some of the most important parts. Great, clear demo, but you can’t see what he’s doing at these points. 😔

This is just what i needed. I'm new to making bike adjustments and got an old nice bike from someone. Time to dive in with confidence.

I love the Park Tool's KZfaq videos and have watched many videos. I have a question about adjusting the rear derailleur. My fitness bike (Trek FX 6) shifts from 5th gear to 6th gear (to a heavier gear) with some delay. I know I need to lower the tension. My question is whether I should lower the tension when the chain is in 5th gear or do I lower the tension when the chain is in 6th gear. I hope you can help me with answering this question. Many thanks in advance and kind regards!

Too much hassle

Oh this is amazing. I have been putting off tuning my brakes and this was great explaining all the little parts. Thank you.

why would you ever try to explain all this to somebody, just send them the video.

You guys are great 👍 excellent videos and descriptions with links.

One piece cranks still far superior to all the rest why they change them is beyond me

after ungreasing and regreasing whenever i pedal it gets stuck while turning like somethings pushing against it making it wayy harder to pedal and makes a sound like medal is touching medal any help anyone?

I'm pretty sure I've watched this video about 10 times over the past few years 😂 and every time I come back I get my problem figured out!

Finally, a video that clearly shows and explains exactly what I needed to know. Thank you Calvin and Park Tool production team. Excellent work as usual.

This video is absolutely perfect.

Me and my wife were watching... completely turned on...

At maximum looseness, i still get a lot of chain rubbing against the outer cage in the lowest gear (ie large gear at front, smallest gear at back). Any ideas on how to stop it?Boardman Adv 8.6, Shimano Sora 18-speed gearing with an 11-34T cassette, if that helps.

Got my cheap, dicks sporting goods, my bike, shifting like a boss, using this video, thanks. I tellya I bought this from a box store and the guy "teched" it out, lol ok... Well I played around with the adjustments and this thing is sounding and shifting way faster now, I love it, can't even hear the chain and the shifts are quick and crisp. Thanks again.

My left crank just fell off while riding. Crazy. If it happened 10 minutes earlier when I was descending a hill standing up on them I could have died. Luckily I was just lightly pedaling sitting down at the time so one moment Im pedaling and in 1 second my crank is on the ground behind me. Bike is like brand new 2022 model, all standard, never messed with, never crashed or dropped.

Looks like a sales promotion to sale a brake bleeding kit or individual tools.

Have a park tool stand and a wall clamp. Both have clamps that rotate downward after clamp in my bike in to them. My bike weights 18’ 6”. No matter how hard I tighten the either clamp they slowly turn. Not happy with them

Is that brooks leather bar tape that soaked in the water ? Surprising me, If they are waterproof😮😮😮

I adjusted it at the second to last and now my second cog wants to jump back to the first. Please help.

How did you magically get the wire for the derailleur out of the derailleur That's what I'm stuck on right now

Great video , haven’t used a bike in a while , was unaware of the proper way to attach this new patches . Thanks for uploading

Excellent video. But adjusting headset preload with almost fully tightened stem bolts? 12:56 Not going to work

There's one problem - the thing that holds the magnet in place tends to break, making the cleaner almost useless. I keep the magnet in place with a piece of duct tape and it keeps falling off. Please update the design, guys!

I need one

Recently bought a used MTB which had clipless pedals that were stuck. My solution was to buy another crankset 🤣

That’s just way too Much stuff.🤦‍♂️

Every now an again, very rarely I go through the front and rear adjustment. These video's are great but I spend 3h, at times going over and over through the process. Hard work but it pays off.

A squel is a harmonic resonance? Now I've heard everything

Awesome

I have that same "clunk" noise coming from my casette but it's only when I'm on the bottom 4-5 sprockets (11spd casette). Initially I thought it was the missing spacer but the guys in the bike shop gave me a spacer and I installed it. Could be that the free hub body itself is already worn out?

Yep had that on my campagnolo cassette as tried to tighten with a shimano😂 bit the bullet now and bought the campag cassette tool 🐵 wow what a difference 😳

GREAT GREAT GREAT VIDEO!

Thank you so much, I was up until 11:40 messing with my brakes. I took them off to tuneup and couldn’t get them back on right. I’m gonna try this tomorrow morning

If there is a more accurate and detailed video on gear correction anywhere on the net than this guys I will eat my hat. He is the master of bikes...

Calvin is teh man!

Love it.

Great video.

Can road bike pads be installed on v brake calipers?