That's why you buy AC Delco parts. They are more expensive, but they will save you from future headaches.
@oriancunningham5 күн бұрын
My k2500 just did this yesterday, had been running like shit for a minute, figured it was a vacuum leak, imma have to check the regulator tomorrow
@FreeLovingAmerican13 күн бұрын
This is hydrolock.
@masonchapman157518 күн бұрын
Where did you get the kit at I want it on my 2015 ram
@markwilliams586726 күн бұрын
Got a question I'm having the same problem did you have to change the spider deal as well or no...video was very helpful
@Kevin-fs3qdАй бұрын
Less talk more work son
@gerlandkent6377Ай бұрын
[thank, you for you're video.👍 same year make and model and same color duelly truck that I've. got to]👍
@jasoncaron14643 ай бұрын
It bothers me you didn’t remove the weights lol and for next time you can lightly sand the clear before applying stripper helps to penetrate and work faster
@curtisgrant26873 ай бұрын
awesome. you may have soluted my problem. I hadn't replaced the spider injection bu issues are the same. I'll find-out later. THANKS !
@tsi87supr603 ай бұрын
Dechrome it, clean and clear coat the hood, knock out the dents and enjoy it
@andrescruz77094 ай бұрын
So the truck just has pipes instead of cars?
@mattleibrock4 ай бұрын
Never just grab a bulb unless your hands are clean
@bullstanky5 ай бұрын
Not to sound like all of the other comments, but this video saved my butt. My 1999 Tahoe 5.7 vortec just stopped all of the sudden and wouldn't start. I checked the battery connections, charged the battery, and then replaced the starter, but it still wouldn't turn over...this didn't make any sense to me. The transmission wasn't holding the pressure plate and the engine wasn't mechanically seized...why wouldn't it spin? Then I saw this video, sniffed the dipstick (smelled like gas), took it back to the shop who had worked on my intake 7 months prior (they had installed a new spider gear), stated my case, defended against their initial pushback, and guess what, they drained it, refilled the oil and put in new spark plugs, installed a new spider gear (under warranty and hopefully they did it right this time) and it started right up (and at no additional cost to me). I was just about to think about scrapping this truck, and now she's back to running like a top.
@kurtishocker69975 ай бұрын
Pull your sparkplugs and roll the motor over to blow all fuel out of cylinders
@SonOfNone5 ай бұрын
This is why they say to always get acdelco. Granted, spider injectors from them are around 700 bucks compared to FJ504-style chinese spider injectors coming in around 180-200. That's the only reason I haven't done the conversion yet
@CaptTetanus6 ай бұрын
I can’t wait to do S&B to mine, I have a Pedal Commander already installed, it’s gonna be crazy!
@sebastianteruel73526 ай бұрын
Sube un video de la camioneta restaurada!
@TimLegg-yy9wr7 ай бұрын
I had that happened to me i 😢 i freaked out but i have a 94 chevy c1500 5.7 throttle body tbi i rebuilt was doing fine then it started flooding over had a weird noise coming from the injectors put air cleaner to see were it was coming from then noticed it just pouring fuel outa the injectors then i tred start it it tryed then lock up i was like oh hell no i was freaking out then i pulled fan shald off and pulled all the plugs and gas just pourd out then i cranked it by hand with a wrench and it broke free plus i dumped alittle tranny fluid in each of the plug holes think goodness i didnt change oil yet
@TimLegg-yy9wr7 ай бұрын
Take the plugs out
@leewalker35147 ай бұрын
Thank you I have that same truck even the same color
@stupidasso61838 ай бұрын
Replaced the fpr today, yup still wont start.
@Reeds-Garage8 ай бұрын
Is the engine turning over? If not then check the oil and make sure you don't smell gas. If you smell gas and dip stick shows way over full. Engine could be hydro-locked. You will need to do an oil change.
@Lunatic_Lou8 ай бұрын
Those fogs weren’t very bright
@judehollister54148 ай бұрын
Do you still have your resonator
@whoiskand8 ай бұрын
He said cause this little part went bad Never said what that little bad boy that went bad was? The actual name of the part you are pointing to... *That might help the tip be informative useful information*
@Reeds-Garage8 ай бұрын
part was mentioned at 8:31.... fuel pressure regulator
@jimmiegearhart32599 ай бұрын
Aircraft stripper does the same job in 10 min bro just saying
@masonkeller35849 ай бұрын
Can't wait for mine to arrive 🥴
@Keeter949 ай бұрын
For the bumper brackets and the bumper how much was out the door price? I’m thinking about doing it.
@Reeds-Garage9 ай бұрын
Brackets were like $40 bucks off Amazon and I can’t remember what I paid for the bumper. But I’ve seen them on marketplace from $150-$500
@dennishollingsworth13269 ай бұрын
Hell Yeah. I gotta 2018 Ram, need to do that to mine.🤘🤘🤘🤘🤘🤘🤘🤘🤘🤘
@finestoffreedom31709 ай бұрын
Makes it slower
@kennethhuff715810 ай бұрын
I know some of you just like to switch things up but there were a lot of design hours that went into this Gen 2 truck and when they came out they sold like hotcakes, that truck has one beautiful rugged front end already , I got a 95 2500 V-10 I leveled the bumper up put a new grill with headlights and I did paint the whole bumper black don't like the old gray it's just one good looking front end on these old trucks.
@traverewarren103910 ай бұрын
Loves those old OBS trucks always a pleasure to see young guys like you bringing them trucks back to life bless you
@miche226910 ай бұрын
great video dude
@HqualH10 ай бұрын
Does this happen to be in CA? Trying to do stuff to my 04 Cummins but am struggling to find out if I even can
@Reeds-Garage10 ай бұрын
No, I’m in Texas
@HqualH10 ай бұрын
@@Reeds-Garage damn, thank you! I’ll go talk to my local smog shop and see
@musicentertainmentvideos180710 ай бұрын
Do you have to unplug the battery? To install it
@oso859510 ай бұрын
Any drone when towing
@coverado11 ай бұрын
Hey Sir! This is Cherry from Coverado selling car accessories. Nice to meet you! We are now looking for some partners to try our Ram custom seat covers and help us make a video. Are you interested in collaborating with us?😉
@Coffeeground11 ай бұрын
I was thinking about how to inspect the inside chamber and what you showed is spot on, thanks!
@swiftyjohn368311 ай бұрын
Goddamn sounds really good
@pebblesadams174411 ай бұрын
Having same problem
@brandenhamilton1901 Жыл бұрын
Those holes are for chicken lights correct ?
@kenverrill4205 Жыл бұрын
just a tip....when you're done polishing, there's a glass cleaner call "sprayway" white can light blue cap...spray wheels and clean like glass. there's no ammonia (streaks) and cleans a lil bit more
@phillipislit1045 Жыл бұрын
You need a new carrier bearing
@jordanniblett7055 Жыл бұрын
I have one almost identical to this one just white and was wondering how you got the headliner so clean
@Big_boi545 Жыл бұрын
My dad has 2004 Dodge Ram 4.7 and he was going to fix exhaust then after when I was checking then my dad said the exhaust behind it was burning the tire under then he said he might get new exhaust so I told him yes let’s do it
@901rammandillon5 Жыл бұрын
Nice truck! I have the same mods on my 2016 Laramie 2wd, except I have the Flowmaster outlaw muffler and resonators deleted. My pulsar is an older version, but my check engine light and the red lighting bolt light comes periodically and goes off after a few engine cycles. Does that truck have the same issue? I've had my pulsar programmer for a couple years now, and I've tried taking it off a few times and letting the computer reset after a while, and the same thing happens. Is there any difference between the newer model and older model pulsar programmer? I also have the S&B Cai and Moe's performance 87mm throttle body and throttle body spacer.
@denots42 Жыл бұрын
Should’ve got a Diablo tuner so you can actually tune the truck the edge system doesn’t allow for changing of anything because it plugs on top of your stock pcm the Diablo comes with an unlocked pcm and you can actually adjust everything and tune it for real horsepower gain unless the new pulsar system is different than the 600 dollar one
@patrickzerangue6562 Жыл бұрын
How long did it take to get all the fuel out of the engine?
@JoseAGarciaJr Жыл бұрын
Hey great vid just came across your page, looking to get a 300ex back up and running myself. Any update on if you were able to revive the quad fully?
@jimmycorbett4611 Жыл бұрын
Did you sell this truck? Not seeing any more vids on it?
@jimmycorbett4611 Жыл бұрын
Hey, love the video! I have a 1998 GMC Sierra c1500 single cab pickup with an 8 ft bed. I love these types of videos and I love detailing. Do you mind listing off some of the things you used in the video to clean your truck? The cleaning sprays for the seat inside? The spin brushes? Looked like all the stuff you used did a great job I’d love to use same of the same stuff on my truck, do it right.
@jimmycorbett4611 Жыл бұрын
Also that vacuum? What brand is that it did a great job with some elbow grease