The Pursuit

Пікірлер

@JRuse-bv3hz 11 күн бұрын

Melt

@blackeman1 14 күн бұрын

Thank you for this video

@sherizazzetti1824 16 күн бұрын

We bought a new fuel pump assembly, the flow has power,but the orange don't,the fues, relay are good , but i bout a new one for the fuel pump. Any idea its the computer ot drop the tank and che the orang wires

@thepursuit844 15 күн бұрын

Sorry i dont recall as this project was done many years ago.

@kingkid7107 Ай бұрын

I got the same one. Whenever I start it it idles at 8k and won’t stop 😢

@thepursuit844 Ай бұрын

There is most likely an air leak.

@mammon666mk 2 ай бұрын

most pointless video ever

@samblake5318 2 ай бұрын

Thanks, it did help 👍🏼

@sergiocabrera9126 3 ай бұрын

how many cc's fit into the bar?

@thepursuit844 3 ай бұрын

I’m not sure anymore as this was an old job. I’m sure the world wide web knows.

@joeycottontailakajoeschmo3366 3 ай бұрын

My choke won't pull out out of the carb body no matter how hard I yank it. anyone else having this issue? Something is definitely odd with that because yours came out like you could have did it with your toes. i would just leave it alone but it isn't functioning properly. Also my diaphragm is torn.... anywhere you can get those besides dealership?

@thepursuit844 3 ай бұрын

I wouldn’t use brute force. Play around with it. I’m sure you’ll get it. Any good bike shop can get them or search online.

@joeycottontail943 4 ай бұрын

Amazing video. Rebuilding one for a neighbor and this helps immensely. Looks like we need a better rebuild kit because the one we have is junkshit.

@LindValleyMedia 4 ай бұрын

Very bad video

@johnnymartinez733 4 ай бұрын

Quick question brotha.... If I'm taking off my factory air filter and air box to put on Air pod filters instead...... What do I do with all the extra hoses? That were connected to the air box?

@thepursuit844 3 ай бұрын

You’ll have to route them somewhere else. They’re just vents.

@johnnymartinez733 3 ай бұрын

@@thepursuit844 I'm totally new to this brother. So I can't just pull them all off can I?

@thepursuit844 3 ай бұрын

@@johnnymartinez733 pull them off the airbox and ziptie them up out of the way pointed down so they still vent but water wont enter the tubes if you ride in the rain.

@johnnymartinez733 3 ай бұрын

@@thepursuit844 thanks man much appreciated 👍🏻 you have no idea... I'm guessing I'll have to reset the carburetor also

@fl7645 7 ай бұрын

The japan harley davidson sportster but with better engineered

@D0u61a5 7 ай бұрын

Great Video. I know this is old, but for anyone looking at it, it is also worth removing the quarter shaped cover on primary carb, held on with Phillip heads for cleaning and inspecting. Under the cover is a spring and diaphragm that squirts extra fuel on quick acceleration.

@LOOKOUT2012 2 ай бұрын

I think you're referring to the Coasting Enricher / Afterburner Diaphragm, this is Not for extra fuel on quick acceleration... It's the exact opposite - when shutting off from full throttle it adds a richer fuel mix back to the primary carb.👍

@guyski666 10 ай бұрын

I bought an 84 Maxim X 750 back in the day for $1600 Canadian - only 6000 km on it. Great bike - rode it down the coast to Mexico and back. Was a bit of a sleeper so I made a fair bit of money goading guys with 1200 BMW's (because they have the money) into drag races - wasn't even a contest -I would hit 2nd gear and leave themin the dust :)

@thepursuit844 9 ай бұрын

Awesome story!! I’ve walked all sorts of Harleys. They are so confused.

@barcusful 10 ай бұрын

Lovely bike

@thepursuit844 9 ай бұрын

Thanks. Stay tuned for some maintenance on it this winter.

@clevelandlloyd6476 10 ай бұрын

"Promo sm" 👀

@kaje2394 10 ай бұрын

Well this was a waste of my time.

@anthonytaylor1855 11 ай бұрын

Thank you! This was an awesome tutorial.

@garynorman2499 Жыл бұрын

my one has two hoses on bottom. where does the 3rd go

@bartolo4u Жыл бұрын

Hi. You're very good. I wish you were my neabor. I don't know nothing about motocicle. P.S. I just brought a kawasaki vulcan clasic 800, 2005. If you have done or going to do install the turn lights, please let me know. Thanks again. God bless.

@thebrothers4311 Жыл бұрын

My right blinker is the same... when I squeeze the harness it works. Not sure if I want to cut in or take to the shop and let them

@davidkarlsson2684 Жыл бұрын

Thank you! 👍

@headstill Жыл бұрын

Suzuki Ninja …. Wow

@headstill Жыл бұрын

WTF??? CLICK BAIT WASTE OF TIME!!! If you are going to talk about a serious maintenance item on these old bikes then show us what it takes...total BS.

@niconine268 Жыл бұрын

This is a brilliant detailed tutorial. Thankyou. Just struggling with low def pic quality. A little blur. I have this XT as well

@gordmaher8160 Жыл бұрын

Test ride video?

@Shibbybooboo Жыл бұрын

You didn't do the second diaphram

@jonathanrautenbach Жыл бұрын

My 1990 ZX10 is running very rich. The manual says the pilot screw is the air mixture screw. But it's located on the engine side of the carb. Just like yours in the video. Does that mean they are actually the fuel and not the air mixture screws? So I should turn them out from all the way seated maybe 1/2 a turn less than what they were originally set to?

@thepursuit844 Жыл бұрын

If your bike is way rich then you will have to rejet the carbs. The screws are only for super fine adjustment, between jet sizes. See my syncing video for more on that. I don’t recall if these ones control air or fuel.

@experiencejoshtv8143 Жыл бұрын

Dude if you just wanted to show your bike off go to instagram. This video is pointless & a complete waste of time

@cesarflores9484 Жыл бұрын

do you have a video of disassembly

@MTOGRT Жыл бұрын

Now to clean mine.

@brokenwires8218 Жыл бұрын

Vn 800 classic, i need pilot jet adjustment, how do i do that?!?!

@thepursuit844 Жыл бұрын

I’d have to refer to the service manual which I don’t have on hand at the moment. Off hand I would say, take the carb apart and replace with a different size jet.

@robertjeffery4664 Жыл бұрын

It's not a fucking Fat Bob it's a bloody Fat Boy

@kwasidanso6219 Жыл бұрын

My fire also go off

@bellaputput Жыл бұрын

i would love to see more of your bike please

@ricksperfkanski3222 Жыл бұрын

Great bike I also have one .I love it. Lots of power and comfortable to ride

@niconine268 Жыл бұрын

Thanks. I've got the same bike

@carlosecheverria1401 Жыл бұрын

It's a 700 not a 750.

@niconine268 Жыл бұрын

Thankyou. Great tutorial bro. You're a highly efficient tech & top quality video & instructions

@derrickgeiger Жыл бұрын

Thank you for a great video. I am rebuilding the carbs on my zx7r right now as I watch.

@thepursuit844 Жыл бұрын

Have fun!

@chrisvernon-jy1cm Жыл бұрын

howd that go any tips ? im trying to rebuild mine myself right jow with no experience

@thepursuit844 Жыл бұрын

Be organized and methodical. Do one at a time so you don’t mix up parts and can reference an untouched carb if you forget. It is pretty simple. Clean clean clean! They can never be too clean.

@derrickgeiger Жыл бұрын

@@chrisvernon-jy1cmit starts right up now, idles great and has a much snappier throttle response. Like he said, you can't clean them too much. Make sure every gasket and o-ring is in place. They really are very easy to rebuild.

@HJMBCBA 11 сағат бұрын

What an outstanding video! Please can I ask, it seems there is no need to set or adjust the main jet? You just screw if in all the way and lock off with the nut? So the only area’s on a rebuild to adjust/check would be 1. float 2. Balance once rebuilt?

@Trek412 Жыл бұрын

I lost my trust on NGK spark plugs. Few months back I replaced on my truck and after a month things started to go wrong. Misfire, blew up the air compressor, alternator, and a cat convertor. Two of the plugs found out under spec resistance. Anyways. I picked up cheap '98 v800 with lots of issues. Smoking exhaust, lots of wiring issues. Learning to fix and make it run.

@shiftyshamsk Жыл бұрын

My ZX9R 2003 carbs won't tolerate super unleaded fuel. Only runs well on cheap unleaded.

@ToxicCityOfficial Жыл бұрын

Just bought my 2nd maxim, exactly like my 1st which I had to sell 6 years ago. Verrry excited to treat her much better and put the effort you did into her.

@ToxicCityOfficial Жыл бұрын

Also am in Alberta, we should ride sometime next year!

@ToxicCityOfficial Жыл бұрын

@@thepursuit844 1985 maxim x 750. Unfortunately, I put gas in it today and had a huge fuel leak from between carb 2+3, looks like I'll be changing gaskets and o-rings and giving the carb some attention over the winter

@gabedearmon Жыл бұрын

where can i find a replacement carb for this bike please help 😭

@thepursuit844 Жыл бұрын

Unfortunately i do not know. Id ask a local bike shop.

@gabedearmon Жыл бұрын

@@thepursuit844 the only one i can find is an oem on that’s $700 and out of stock, it hurts my brain

@thepursuit844 Жыл бұрын

Check old used bike shops and wreckers.

@jlborish Жыл бұрын

Thank YOU, thank YOU, Thank YOU....made my rebuild so much easier.

@spulamander Жыл бұрын

Total waste of time.

@Green_stax 2 жыл бұрын

Where did you purchase your carburetor rebuild kit?

@thepursuit844 2 жыл бұрын

My local bike shop.

@MadiliaSarwary 2 жыл бұрын

The spring must be placed vice versa i think

@jasonbackpage6944 3 ай бұрын

The orientation of a progressive spring shouldnt matter other than the tighter compressed or side with less pitch is heavier so many times its placed at the top to reduce the unsprung weight but the spring rate is the same in both directions.

@UNIONMONEY92 2 жыл бұрын

You skipped everything how to take out the carborator lol

Ең жақсы KZfaq

Пікірлер