If battery change does not work correct how do you reset

Thanks for the very good instructions on adding the doors to the BillyBookcase

Can this not be affixed to the wall?

Thanks, saved so many arguments :))

Great instructional video for my 2014 Nissan Murano. The only thing I wish you included would be which battery terminal to attach first during reassembly. Your video was very helpful. Thank you

I’ve been using Doc’s diesel filters on my 18 XD pro4x and they’ve worked great at half the price.

An excellent video, very informative. However when i ran out of cam screws I realised that the equipment had been updated and I had to go back and swap all of the base cams with plastic ones as opposed to the metal ones used for the drawers themselves.

Im a shelf

Wow, a little cleaning would make that vehicle look a lot better!

A very small top for anyone following these instructions. When you mark the middle shelf position you don't need a ruler or anything special to draw a line, use a shelf! They are already the perfect width, just join the marks and draw the line with a pen or pencil. Super easy!

Most studs in a wall are 16" to centre, also if you dunt have a stud finger tap wall, when you get a solid sounding part it's a stud :) also ikea glue theirs to make more stable. Great clear video

How has the counter top held up? I’ve heard it’s a nightmare to maintain and I just bought this. A lot of reviews mentioning cracks and bubbling veneer and it apparently gets damaged easily.

Finally! A video with no b*! You are a hero my friend. I watched so many videos and tried so many things. Nothing worked. And I mean nothing at all. Once I softly and gently pushed the little metal blades up it worked!!! Definitely my hero!!! My car was already locked and wouldn’t open at all!!! Thank you sir! Please continue making videos !! We definitely need you in this car world!

😊fabulous work! See you again soon. Kudos for your dedication to help put together this project. Clearly communicated!!!

Are the cams supposed to be kinda loose in the holes?

The key is inserting the glass into latch if you are patience enough this video will be Very helpful thanks a million

If your key doesn’t work after you changed your battery call a locksmith you’ll need a new key !!

I was missing the last screw step thank you thank you!!

Thank you!

Yikes it looks difficult. I have done many door panels with ease but the rest seems so daunting.

Thank you for the video. Getting ready to assemble ours. Mine isn't for the kitchen though. Going to be part of my sewing room, perfect for cutting fabric and storage. It is all together now, thank you for the video, it was a great help. I agree with hollielifestyles2844 about the long winded not necessary information. Perfect detail.

I got one with just one shelf. Is your assembly instruction generall just the same. Just not the added shelves? thanks

Bro that worked for my fobs, for months it wouldn’t unlock or lock or start remotely unless i used the keys to lock and touch the start button with the fob. Thank you so much bro

i got a question i got a 2017 nissan titan crew cab, last year we went to the beach and i forgot my key fob was in my pocket and it got wet in the salt water, i dried it the best i could, i used a alcohol soaked q tip swab and dried it and then replaced the battery and it started working, but it would drain the battery down in a couple weeks if that long, we took our spare fob buy missed placed it until we got home by that time i had bought a replacement fob and had a lock smith program the new fob with the one that got wet but was working even tho it would drain the battery... Can you help figure it out. could it get corrupt data cause it to drain the battery. Can you reprogram a fob once it has been programmed.

excellent video, thank you

Amazing, could not have done it without the video as the instructions were not the best. Thank You!

Use your imagination on the outside handle rods. Very helpful…

Kallax aren’t like this anymore now there’s just cheap wooden dowels, no cam locks

Thank you

super helpful, thank you!

helpful view, u should have filmed the way u secured it to the wall though

FR legends soundtrack???

My window glass is completely down in door, not sure what to do. Can anyone help please. Thanks

😂❤

Thank you so much for your trick. You saved me of paying for a towing and mechanic 😂

Here is what I did for the "use your imagination" part and "putting the window back onto the regulator clips": "use your imagination" - I left the panel on, stuck my arm through the smaller hole and you can feel a plastic clip holding the rod in at the very top, you can easily slide that clip off towards the right. It just slides off, then the rod will easily slide out of the hole. Same goes for the inner-smaller one. Putting them back on is a little more tricky, but I lined the inner-smaller one first, put the rod in the hole, then slid the plastic clip back on, then did the outer-bigger one last. You do have to use your imagination but once you get one off, its pretty easy to picture it. "Window into Regulator Clips" - The window onto the white plastic clips on the regulator was a little more tricky for me. I was worried about breaking the window albeit you need a lot of force for that. Having a screwdriver slip and break the window is very possible as I almost did it taking the window off. I hooked up the window switch, powered on the van and rolled the Regulator down about half-way so both clips were easily accessible through each hole in the panel, taped a small knob of electrical tape onto the end of my Flathead screwdriver and pushed the clip back with it, slid the window about half-way in, then did the same thing on the other side. Once both sides were about halfway in, I just pushed down on the window - gently, but firmly - and it slid in with no issues. Took me about 1.5 Hours and NAPA had the part in stock, thankfully. I hope this helps someone.

I changed fobs, everything on the fob works but now my keyless entry isn't working. That is my favorite feature

Please reply

Please send me this phone I'm beggar big fan

I have black colour in this

I'm very emotion with this phone

Please

Bro can you give this phone to me

repair? or battery replacement... is someting very different.

😢i dont have a hammer

A very succinct and very well explained video. I hadn’t realised I would need the length of the bookcase below it, to be able to slide the back section in, I had to flip the bookcase on its side and slide the backing in that way. All possible after the confidence gained from watching your video.

Is there a way to unclip the hinge parts as I have attached them to my door panel instead of attaching one to the cupboard and one to the door?

3:05 hinge

Very important question. At 9:18 when you were trying to detect the studs, are you saying that we should drill into the stud? I thought that electric wires run down studs, and therefore, we should avoid drilling into it??

Do you suggest the truck lifted or was it fine to do on the wheels?