I like the way you've laid out all those connector types. Could I use this slide for info purposes for my staff? Thanks
@teleacousticplayer93867 күн бұрын
Thank you so much for your videos. Just a quick question, and probably a dumb question. I see in some videos you can connect a DJ Controller to Active speakers. I have the Numark mixtrack 4 channel, and was wondering if it would be ok to connect this to a Powered Mixer that runs passive speakers. I figured might be safe to ask first as I would hate to burn out my new dj controller.... :/
@keeshea67187 күн бұрын
Hi! Thanks for the video!! how would you connect a qsc digital mixer to a dj controller that i can play my sax with my settings through his settings/equipment? thanks so much!!
@prod.trippyfejzi81410 күн бұрын
Thank you!
@innerdrums15 күн бұрын
Since my dj mixer broke and dj mixers offer is so poor (and expensive!) where i live, i decided to switch to dj controllers. So far its a mixed bag experience. I'm the type of dj that use a lot of reverb and echo also when transitioning between songs and with post fader fx First got an NI S2 Mk3. The good: very easy to play/use (FX is restraint yes but so easy to use!! i still miss that double delay) Also ALL FX is post fader and you can also control FX volume with gain/trim channel knobs. The bad: horrible build quality, FX wheels potentiometer started to fail near a year of usage (maybe they'll last longer if you don't are much into using FX), right now im doing the rma process with NI, waiting for a tested refurbished unit which i still have to decide if gonna keeps as backup controller or sell. Built-in sound: didn't like it at all (bass sounded flat as F), ended using it with a external audio-interface. Now i got for my birthday a pioneer DDJ-FLX4, it has a hardware unlock for Rekordbox 7 so i'm trying it. The good: Building material feels better overall, except maybe the pads that makes a more clicky sound than the ones on the NI S2 mk3. Built-in sound seemed so much better to me that the one on the S2. FX is clearly more complex that the one in the S2 but true is that i miss Traktor FX lol. I don't know why but NOT ALL FX IS POST FADER on RB/FLX4. Is not clear to me if this is RB or Pioneer gear restriction but it made noise to me that a simpler and cheaper controller like the S2 MK3 cant handle all fx post fader.
@roddybmusic845118 күн бұрын
good stuff
@James.KingHTX20 күн бұрын
Nice to see another Houston DJ! Rocking 20K in gear!! Crazy bro!! Fun to see it all!
@xasual122021 күн бұрын
so if you hit the smart cfx button n turn the knob ain it gon do the exact same thing my guy ??
@robothug668823 күн бұрын
When the club gives you requests the best thing to do is say "i dont do requests" 😂😂😂
@dezinerAhmad25 күн бұрын
Lovely explanations... Thanks ....
@lakhbawa26 күн бұрын
Great, thanks
@davidvelazquez668427 күн бұрын
Do the keys always appear when you sort by bpm or do you have to set that up on record box before
@AlexMoschopoulos28 күн бұрын
Great video. So helpful because for as experienced as DJ I am, I'm still a rookie with Rekordbox.
@JohnSmith-kn5wtАй бұрын
So, here's the issue you failed to address. Now that you have the multiple BPM's set, the BPM field reads 95 and NOT 128. 128 being the initial BPM of the track. So if you sort the tracks in the list by BPM, it is in the wrong order which means you have to remember what BPM the track actually starts with. Thoughts?
@TenaciousBODАй бұрын
Super helpful
@arash9679Ай бұрын
Thank you so much 🙏🙏❤❤
@Plabs07Ай бұрын
How is your experience with the 750 mk2 I just ordered one new . Was contemplating on xz or this with two xdj 1000 mk2 but went this this set up.
@julieoptimus3730Ай бұрын
Das Lied hat viel zu wenig Aufmerksamkeit bekommen.. schade .. ich mag es so 😊😊✌️✌️
@morpheux2Ай бұрын
Excellent vary clear explanation. Thanks so much.
@ImanIman-ku7huАй бұрын
Thank you for the update I appreciate
@Rzn8B58Ай бұрын
back in the day you rolled up with records and headphones then, played music or you rolled up with a flash drive or cd's and headphnes then, played music. Why they gotta over complicate things? I rolled up ready to play and on my denon sc live everything worked fine, got on the 3000's and it wouldn't load my library. Nothing says standalone player like needing to analyze before it actually plays music. I had 2 different usb's too and I thought I was prepared.
@clientbountyАй бұрын
This is excellent! Thanks a million!!! 🤩
@johnsuggs78282 ай бұрын
When a content provider makes a video so good, you're reaching for the subscribe button and realize you've already clicked it. Nice work. Straight forward, too the point and well made
@Vrael_Skulsingr2 ай бұрын
Thank you for this video. It helped me a lot🙂
@Vrael_Skulsingr2 ай бұрын
How you sort your songs after Populatity/What mean 01M or 01B...?
@David-sm4pb2 ай бұрын
transition tempos? what is that?
@David-sm4pb2 ай бұрын
not understanding anything near the end. something about the way your explaining it sounds like the teacher in peanuts...
@IlustradorJBM2 ай бұрын
thanks for the video! but I have a question.... Do I have to click on ACTIVATE loop in each song? or can I keep them always active by default every time I load a song? I have a little annoying to activate the loops in each song. Is there a way to leave them always active and that when you load the song they remain active? Thanks in advance
@DenkiDeejayАй бұрын
Same question!😊
@neaumusic2 ай бұрын
I think you can set them to 'Gate' mode, which would probably behave like the Cue button
@orenhaim29652 ай бұрын
Thank you very much, that was very informative and very well done💜
@pav19742 ай бұрын
Just a note, this does not work with the dl806 or dl1608, the oscillator is not available on those boards.
@themme_fatale2 ай бұрын
thank you! I've been confused about the difference between these for a while now, and this was really practical and clear
@___evangelos___2 ай бұрын
Thanks for this. Those squares are super annoying, and I didn't know how to change them.
@netalysassover20732 ай бұрын
great vid. How did you know what bpm those two parts were?
@jrm_music72293 ай бұрын
Are amy of these bluetooth ??
@Denerick2008Ай бұрын
Flx 4 i have these
@Toto-et9gw3 ай бұрын
thank you very much!
@mark2tech3 ай бұрын
I’m new to Serato. I’m having the problem that whenever I adjust the marker further in the song it messes all the previous markers. Idk how set a marker without moving all the other markers. If anyone knows what I’m doing wrong please help.
@dhruvababji87213 ай бұрын
So auto sync and auto match BPM is same?
@ballerstew3 ай бұрын
thanks you! help ful!!
@averymcdaniel4233 ай бұрын
What is the adapter o n tthe rca cable called?
@DJFriendZone3 ай бұрын
Look for RCA to 1/4, store.djtechtools.com/products/chroma-adapters-rca-1-4-jack?variant=40262775898199
@sgs21fe5g-jt8wy4 ай бұрын
sorry appreciate the effort but instructions are extremely unclear. tried getting it to work on tori amos professional widow (armand van heldens star trunk mix) where the beat changes after the vocal break, but couldnt get it done :( after i set the markers, any adjusts are applied to entire beat grid. can you make more precise step by step guide?
@andnegr4 ай бұрын
Great video! Thanks
@chef-flachinoflava21524 ай бұрын
Very informative knowledge 👏 👌
@desoxx4 ай бұрын
Thank you for the very detailed walk through! This is by far the best I've come across! Well done!
@iliatasho4 ай бұрын
What if i want to switch to another laptop or use serato app, these tags are not going to show up because it is stored only in recordbox and not in id3 tag of the songs themselves. Your multiple tag system in recordbox is fast and convenient but it isn't that efficient in long term use.
@DJFriendZone4 ай бұрын
If you're trying to sync between multiple apps, you should use something like Leixcon, which can read from and write to different tags (I have Lexicon write Rekordbox's tags from Serato or Traktor's). That way you can also get your cue points, loops, etc. The "grouping" field is written to the ID3 tag for Virtual DJ, Serato, etc but it has to be done differently for Rekordbox because Rekordbox cannot search it. Rekeordbox as a whole does not play well with ID3 tags which is a known limitation, and it has additional problems searching fields that are stored in the ID3 except for a select few that you may want to reserve for actual song information. Because you can sync your Rekordbox collection between multiple computers, if you switch to another laptop, you can use Rekordbox cloud or something like the aforementioned Lexicon or Mixo. With that said you can use something like the "label" field in Rekordbox which does get written to ID3 and can be read by other programs like Serato and Virtual DJ (if you don't mind overwriting the existing label)
@DjMixterMark4 ай бұрын
Simple explanation... Thank you ❤
@traxonwax4 ай бұрын
Some DJs will insist on running a controller into a mixer to get extra headroom. I only believe this is needed if the controller is USB powered. But the vast majority are ran on DC power from the mains. The other reason is if the preamp on the controller is of poor quality, you’ll want to hook the mic into the mixer.
@consciousmeandu4 ай бұрын
thank you! nice video! I'm beginner DJ and I'm using normal hashtags like #banger #70s #wedding #ambient #acapella #woman #saxophone etc. why do you use "comment2" instead of normal comments?
@teaforone774 ай бұрын
Great tutorial!
@select244 ай бұрын
How do you delete saved loops?
@MrNembhard4 ай бұрын
I appreciate your work but Rekordbox' tagging system is waaay too good and easy to navigate.