00D4 SRS Airbag Service Urgent How To Clear Fault Using Autel Maxisys

No video

00D4 SRS Airbag Service Urgent How To Clear Fault Using Autel Maxisys | Volvo S80 S60 V70 XC70 XC90

Рет қаралды 105,334

Күн бұрын

Thank you for taking the time to watch my videos. Don't forget to Like and Subscribe.
This video show how we resolve fault codes 00d4 00d5 2003 Volvo S80 after the DIM was repaired. You can clear the fault before repairing but it will return shortly if not immediately.
If you need need you DIM repaired check out our website here. www.automotive...
My scan tool (used in video) amzn.to/2JvWbP6 $2300
Scan tool (eco Volvo scanner) amzn.to/3h6NT0Z $85 (can read and clear all faults in Volvo vehicles)

Пікірлер: 34

@sharedremedy 4 жыл бұрын

Dude you couldn’t have closed the door so we didn’t have to listen to that beeping the whole video?

@supernotnatural Ай бұрын

they are retarded thats why

@brad173 2 жыл бұрын

You guys fixed my 2003 S60 cluster and had it back to me in a week! That was including July 4 holiday! Great service and excellent video to help clear the code. I had to search a little on my reader since it was different but still managed to get it done. Thanks for all your help!!!

@lilbuddylee131 4 жыл бұрын

If I had that equipment I wouldn’t be watching this video.

@adrienhummel7014 4 жыл бұрын

as same ! at vide open i thinked just tip fr erase (fuse, battery) lol not :) get vida i think...

@mektroll1 Жыл бұрын

tack så jättemycket för hjälpen det fungerade perfekt .

@mack460 5 жыл бұрын

That scanner is a MONSTER!

@thatjdmkid8170 3 жыл бұрын

Close the damn door

@IanConnell 11 ай бұрын

Thanks for the video!!! I'm going to use an icarsoft scanner for this and based on comments below should do the trick.

@MarkfromNewYork 4 жыл бұрын

put that you need that scanner in the title

@loriclark8462 5 жыл бұрын

Close the door or whatever is causing the bell/beeping sound. Jesus! I thought it would go away initially but...

@AutomotiveCircuitSolutions 5 жыл бұрын

I'm sorry I can't do that, maybe next time though.

@sneekc2146 4 жыл бұрын

They did amazing job highly recommend

@ronbuchhold7902 4 жыл бұрын

slick as poop thank you for info / been driving with that srs message for three years had the cluster repaired and now plugged my icar scanner and followed the video and message is gone .

@jondawnjoshuahutson1877 3 жыл бұрын

Shut the door next time buddy.

@JnJShiffler 4 жыл бұрын

2004 XC70, right front wheel hit curb, passenger dash airbag deployed, car won't start, cranks. Airbag fault message. If get a dash /airbag, a new impact sensor and replace (as well as bent subframe) will I still have a fault and not be able to start? Are you familiar with reprogramming the SRS Control Module to new components? Any advice most appreciated.

@dallas973 Жыл бұрын

do you have any idea bout my problem ? module driver side to open and close windows work with contact on but engine not working ! when i start the engine after few seconds this module doesn t work anymore !

@cherylphipps2166 5 жыл бұрын

I get this urgent code. they clear it and it comes back!

@AutomotiveCircuitSolutions 5 жыл бұрын

That's because there is a fault inside your DIM and the DIM need to be repaired and then cleared of all codes for the light to go away. You can send us the DIM for repair, link to our website is in the description.

@cherylphipps2166 5 жыл бұрын

@@AutomotiveCircuitSolutions Thanks! I'll bring this to my "VOLVO" mechanic's attention. They've already replaced the front passenger seat.

@orangecrushz28 5 жыл бұрын

I have an 04 xc90 did yours go into passive mode like no lights no shifting gears because of these gauges

@elimrmartian 5 жыл бұрын

I have the same car but 2000s also the same message SRS but I can’t afford this tool right now ☹️

@willefrit04 5 жыл бұрын

me to the car is cheap. but to ekspensive to drive.fuck computerworld

@willmill409 2 жыл бұрын

I got this message only after disconnecting a wire harness in the roof when I was replacing headliner

@fatihoval9992 Жыл бұрын

How did you get rid of

@kevinbockius4711 4 жыл бұрын

Does the Volvo eco scanner work for this or do I need both

@AutomotiveCircuitSolutions 4 жыл бұрын

The eco one will be able to read and erase the faults.

@valentindelefortrie4604 4 жыл бұрын

Problème cluster 😉

@valentindelefortrie4604 4 жыл бұрын

News cluster , and good 😎

@sr777videos 4 жыл бұрын

I'm trying to find your link to do the repair on the instrument cluster

@AutomotiveCircuitSolutions 4 жыл бұрын

www.automotivecircuitsolutions.com/products/02-03-volvo-instrument-cluster-speedometer-repair-service-s60-s80-v70-xc70

@spichette 3 жыл бұрын

close the door !

@malykan 4 жыл бұрын

you don't need a video to erase that fault if you had a equipment.. thx 4 nothing

@AutomotiveCircuitSolutions 4 жыл бұрын

Actually you do. I've had multiple shops and dealers keep calling us because they couldn't erase it after we repaired there cluster. Reason was because they were just erasing it from the SRS module without first erasing it from the DIM. That is why we made the video.