02 Yukon Denali XL LED Headlight Install & Review

Рет қаралды 38,603

Thousanddollarcarguy

6 жыл бұрын

LED Bulbs: amzn.to/2Qdws3l
Honest 5 outta 5 Stars. Works Amazing, cheap for what you get. Would Buy Again!!!

Пікірлер: 66

@strtngfrsh 5 жыл бұрын

Why not clean the lens while you had them out? You'll never see the potential of those bulbs with the lens so dirty.

@FoolClanz 5 жыл бұрын

That headlight design is so nice. Just slide the pins out...love it on my tahoe

@Gramps83 6 жыл бұрын

Headlight lense restore needed stat!

@tonydelerme4039 4 жыл бұрын

I always love the Yukon updates. Going to put them on mine. Try buffing compound on the headlight lenses. They work magic.

@roblayne7976 3 жыл бұрын

Use Deep Woods off instead of buffing compound. It works magic.

@Sgt_ToeBar 3 жыл бұрын

Thank you this helped me so much sir I really do appreciate it

@1LElife 2 жыл бұрын

some wet sanding and buffing would be your headlight's best friends

@christopherthomas188 Ай бұрын

Should be in stall in fog light ??( so it’s do not blind the traffic??

@marcos.vlogsandgaming9722 6 жыл бұрын

Plzzz update on the youkon

@flyingscot3666 5 жыл бұрын

Tx for the video - ordered same bulbs as you for my 2004 Yukon Denali (after a false start with another set of bulbs that did not fit - VOROCK8 from Amazon). Additionally, have you replaced the fog lamps and the high beams with LED bulbs as well? If so what bulbs did you use???

@thousanddollarcarguy 5 жыл бұрын

I didn't replace the others, i wanted to, but i ended up selling the yukon recently. My friend has the lower fog lights done, ill ask him and try to get back to you.

@jbelfort3006 5 жыл бұрын

Hey brother, I ordered these after watching your video for 05 gmc Yukon and it doesnt work do I need to add a balis or something?

@thousanddollarcarguy 5 жыл бұрын

Weird thought. Can you snip the wires and reverse them? Ive seen where others came in reversed because they use the same connector on different models but the positive and negative and reversed on other models. Let me know how it goes please!

@OldManFrank 5 жыл бұрын

I installed LED fog light bulbs on my 2010 Ford Explorer 4X4 V8 XLT and I am still on the fence if I am going to install LEDs for my headlights, etc.

@basharalhasan4050 5 жыл бұрын

Bro did you try the led on your lens ? Are the better than the HID xzenon?

@Meezy94 4 жыл бұрын

why

@Alex_Valentine 6 жыл бұрын

In Florida, sticks bite you.

@Dawar55 4 жыл бұрын

I hope to see the interior restoration.

@thousanddollarcarguy 4 жыл бұрын

This truck was sold over a year ago so....its probably not gonna happen

@applepudin 5 жыл бұрын

So I have an 06 Denali and i tried a different brand of l.e.d and not only did it trigger a check engine code but they would often not both come on at the same time when turning them on. I read these trucks have issues getting enough power to turn the led or hid but you didn’t mention any such issues with yours. Did you do anything beyond what was recorded or were they really just plug and play like demonstrated? Thanks and keep the vids coming love your Chanel.

@thousanddollarcarguy 5 жыл бұрын

Nothing else was done on mine. They literally just worked by plugging them in. Is it possible you snagged another wire or connector replacing yours that could for instance pull out anofher harness and trick the ecu into throwing a code. I know as the cars get newer more and more gets integrated into the harness. But its hard to believe the lights could cause the check engine code to come on.

@thousanddollarcarguy 5 жыл бұрын

Also. Thanks for watching! Im very happy to get the views. Have you been keeping up with the miata kart build?

@applepudin 5 жыл бұрын

Thousanddollarcarguy oh yeah for sure I have! But I’ve been following the Yukon a lot closer obviously because I have one and I’m amazed you found one in that good of shape for that much 😮. And no I didn’t damage anything because the next morning after taking out the Hid’s the codes were cleared, could of been a separate issue and a coincidence though. I’m going to try out the bulbs you bought and hope for the best. If not maybe it’s a harness issue 🤷🏿‍♂️

@thousanddollarcarguy 5 жыл бұрын

@@applepudin keep me posted

@TheRADITOelPADRINO 4 жыл бұрын

How you doing i got a 2005 yukon gmc slt and it came with hid setup i ordered some led bulbs amd just wondering how to install and take hid out .it had the connector plus to more small connector red and blue color on wires

@thousanddollarcarguy 4 жыл бұрын

Swapping headlight bulbs in these is super easy. Probably a 2 minute job. Just pull the headlight assembly rods that hold the light in Remove the whole light assembly then rotate the old bulbs out. Simple as that

@TheRADITOelPADRINO 4 жыл бұрын

@@thousanddollarcarguy my thing is the hid wiring set up it has do i remove the red and blue connector wires and leave the one main connector where i can just plug the led bulb?

@thousanddollarcarguy 4 жыл бұрын

@@TheRADITOelPADRINO that should be how it works Just unplug one bulb and plug in the other. The only thing that could cause a problem is if someone wired in a bulb thats not supposed to be in there and would have a different connector. Butbi highly doubt thats the case. Should just unplug and plug back in.

@TheRADITOelPADRINO 4 жыл бұрын

@@thousanddollarcarguy ok ima retry it do you have like a email i can foward you my pictures of truck wiring so you can tell me because i tried turning on when plug amd didnt do anything but i could be doing something wrong

@thousanddollarcarguy 4 жыл бұрын

@@TheRADITOelPADRINO thousanddollarcarguy@gmail.com. im no expert but ill try to help out. Also i have a normal job so it may take me a bit to reply please be patient

@samsen3965 2 жыл бұрын

First, don't see them anymore for sale from your link Then can anyone help as when I check online, all sites say the right number for my GMC Yukon Denali 2003 that seems similar to yours, should be 9005 but a lot of YTers have installed 9006 bulbs instead of 9005!!! Why is that and won't it cause a problem down the line?

@danzare5638 2 жыл бұрын

9005 are high beam bulbs 9006 are low beam bulbs

@coffeedollsvp 3 жыл бұрын

Did u lift it at all or is it stock stance?

@thousanddollarcarguy 3 жыл бұрын

I believe its all stock

@jonb1988 5 жыл бұрын

Did you ever find out which fog lights matched up ?

@thousanddollarcarguy 5 жыл бұрын

Sorry i have bot

@jonb1988 5 жыл бұрын

For your gmc ?

@thousanddollarcarguy 5 жыл бұрын

@@jonb1988 correct. I never looked them up since i sold the truck

@samsen201 5 жыл бұрын

what is the difference between 9004 and 9005 bulbs?

@patlager2110 5 жыл бұрын

9004 is meant for the low beams. They have a black cap on the end of the bulb, spreading the light sideways and out of the housing. 9005 has no cap on the end of the bulb, giving it more forward and focused punch. This matters more for non-projector lens types. His yukon, having a projector low beam, uses 9005 bulbs for both.

@samsen201 5 жыл бұрын

@@patlager2110 Thanks a lot for this clear description. It makes full sense now.

@knobstonestickbows4962 3 жыл бұрын

That's weird. They wont fit in my 04 Denali because the windshield washer reservoir is in the way.

@joshmcelfresh9971 5 жыл бұрын

Replace all the front headlights too faded

@MRAZR00 4 жыл бұрын

Pretty cool but u need new Headlights

@AlexAlex-xl1bs 3 жыл бұрын

Need new headlights first

@user-jk5un1wv7z 5 жыл бұрын

How much price please this LED

@thousanddollarcarguy 5 жыл бұрын

They are usually around 30$ for the set

@user-jk5un1wv7z 5 жыл бұрын

@@thousanddollarcarguy thanks

@gerardmccray407 3 жыл бұрын

Need new housings 😂

@SilkandScrooge 4 жыл бұрын

Alittle pissed before I ordered the ones you put a link to and they are the wrong ones😑

@thousanddollarcarguy 4 жыл бұрын

Wrong as they didnt fit? Or didnt work? They are literally the ones i used in the video.

@SilkandScrooge 4 жыл бұрын

Thousanddollarcarguy the end clip was totally different. The link took me to the 9003s when you need 9005 and 9006 on these I believe. What I ended up with had a weird 3 prong plug and the end

@SilkandScrooge 4 жыл бұрын

www.amazon.com/dp/B07G6XMT3S/ref=emc_b_5_mob_t

@thousanddollarcarguy 4 жыл бұрын

@@SilkandScrooge Sorry for the mix up. A little strange that others didn't say anything. I know it sounds strange but i wonder if the manufacturer updated there listing and that changed it? Otherwise my appologies, ive updated the link in the description to match the one you purchased from. Thanks for the heads up. Feedback from viewers like you help me and everyone else. Much Respect.

@SilkandScrooge 4 жыл бұрын

Thousanddollarcarguy respect back. I should have checked before buying. Just kinda figured the link would be the ones and didn’t even check haha I was looking forward to trying these things out. I could tell they seemed very well made from the ones I did receive. How are they holding up?

@EndlesSuffering 4 жыл бұрын

Buy new headlights, a pair is less than $100.

@austinermis8038 3 жыл бұрын

Not for OEM style Projector assembly’s for the Denali model. (Which you should technically use with HIDs, never use reflector assemblys, they blind other drivers). Because the Denali is the only trim to use projector assembly, they are much harder to come by. I managed to order a pair of oem style projectors off of Amazon for about 147$ and none of the junkyards arround here have OE style projector lights for the denali

@marcos.vlogsandgaming9722 6 жыл бұрын

First

@alolipa 5 жыл бұрын

Hid are brighter than led

@basharalhasan4050 5 жыл бұрын

Did you try it ?? Cause i want to see if the led better or not

@trustenbaker8766 4 жыл бұрын

These things are to fucking bright. It's like having on high beams. When a car is coming towards you with those in it, it's like they have on their bright lights. They should be banned. F ridiculous.

@austinermis8038 3 жыл бұрын

Lot of that comes with someone not angling them properly and not using HIDs in a clean projector housing. I learnt that from experience. After I got my 55w morimoto mini h1 projector lights which were custom designed for HID/Bi Xenons retrofitted into my 2007 OEM Ford Mustang assembly’s and angled them properly there was little to no glare to other drivers, and no one flashed high beams at me anymore.

@raspucin70 3 жыл бұрын

I am glad that I am not the only one who gets really annoyed with these amateurs. Yes its brighter FOR YOU but rest of us are blinded by your botchery. And when you pass someone with those lights, you are screwed because it takes more time for your eyes to adjust to dark.