This isn't all that clear for me because it is nothing like what I am working with at all.

I'VE Had tWo FestiVa's my fiRst oNE Was A SilVER 1989 5-SPEed Manual aNd tHE oNE I Still HaVE NoW is A WHitE 1992 boRiNG to dRiVE idiot PRoof Automatic tRaNSmissioN but it Has A SPoileR oN tHE HatCH BACK Most of them don't. tHE oNE CooL PaRt ABout it is 31 MPG City aNd 39 to 40 MPG HiGHWay but it taKES Bout 15 oR 21 SECoNds to REACH sixty Miles PeR HouR but tHay LooK bettER tHaN WaLKiNG & LooK bettER tHaN the NEWER Models Cause they Ain't FouR dooR dooR HatCHbaCK's. but you KNoW opinions are like Beauty is iN tHE eyes of the beholder opinions are different to each their own

Also will this work if my ima batteries are totally depleted?

This is a great video and I am so grateful. Am going to do this as same thing happened to my 2003 automatic insight. When I open and take off the metal cover I know the main switch will be in the off position because I did itv3 yrs ago. So the two plugs you referenced will be plugged in and I unplug them correct? If so can you explain how the 12v battery recharges itself with no alternator? Thanks and sorry for long winded questions

You do go into tangens

Thanks for creating this tribute to the Festiva. I owned a '93 Festiva L with the 4-speed manual. Very basic but it had beautiful metallic blue paint. I just needed a second car for commuting to work and it served very well. Of all the cars I've owned I remember the Festiva more fondly than just about any other.

Will the key fob work ok with the new start stop switch or will it have to be reprogrammed?

Anyone with a Honda CRZ (2013), is the process similar or more complicated with the CR-Z?

Perfectly explained and directed. Thank you

I had an 88 Festiva, and have nothing but fond memories of it. I am a firearms person. It is said that Americans definition of reliability is things not going wrong, and the Russian definition is that when things go wrong they are easy to fix. I was miles away from home when her clutch went out. or I'd have fixed her.

Dude, I am getting ready to do an AWD 1969 mercury cougar,,,thank so much for doing this video,,might have a few questions,,was thinking about using mating Audi parts since there major into AWD racing..tks all the best..

This worked on my base model 2015 manual 1.6L Kia Soul. My issues started with the car not wanting to start when it wasn't cold. I could hit the gas pedal to get it to barely start, but then my tachometer stopped working too. Oh I also had the Electronic Stability Program (ESP) light on my dash, which looks like a car with tire marks behind it. I replaced the sensor like in the video, had to remove my negative battery terminal twice because the first time I didn't leave it disconnected long enough. Anyway after that the car started right up fine, tachometer working great, and no check engine lights or codes. I ran the car for like 5 minutes down the road to get it up to temp. I shut the car off and restarted it without issues. This video helped a ton. Thank you! Just make sure you get the old rubber ring off before you put the new one in, because I saw a post on a forum where someone didn't, and that extra millimeter of difference was causing issues.

He is a best of all dumbs mechanics. OMG.

I am about to buy my first car… a 1997 ford aspire. And deep down it’s just a Kia with ford badges on it

So looks like this project was quickly scrapped? I wanted to see the part 2! Haha

Thanks!

My Kia does crank no start and just click instead of the engine turn over. Do you think replacing the fuel injectors will help resolve this problem?

Was there a fsult in diagnostic tool for that g28 sensor?

Why can't the passenger side header be facing up?

Worked perfectly. Thanks!

Noooooo! That car is my life. I even went up mountain with it. It hada good tape deck

Would the car idle rough once you give it gas would it stall and back fire?

I CAN'T STAND MISMATCHED YEAR, MODEL, AND/OR EVEN TRIM LEVEL WHEELS ON A DIFFERENT CAR/TRUCK NOW!!!!!!!!!!😭😭😭😭😭😭😭😭😭😭😭😭😪😪😪😪😪😪😪😪😪😪😡😡😡😡😡😡😡😡😡😡😡😡😡😡🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤢🤢🤢🤢🤢🤢🤢🤢🤮🤮🤮🤮🤮🤮🤮🤮🤮🤮🤮🤮🤮🤮🤮🤮🤮🤮🤮🤮🤮🤮🤮🤮🤮🤮🤮🤮🤮NEVER KNEW IT HAD GMT900 ESCALADE WHEELS TILL NOW

Hi. I still have spare parts available.. I’ve seen one and I want to buy it.. it’s parked for many years in a house... what do you recommend?

My doors Toyota Echo are stuck too

Should be in stall in fog light ??( so it’s do not blind the traffic??

Mias mine, loved that little car😊

Excellent instruction - clear, concise, complete. Thanks very much.

Can't believe I'm just finding this channel

Nice. On with my search for a GDI injector replacement.

Thanks for this video. It helped me a lot when I removed the door panel on my old suburban.

This car was produced in Iran until 2020. Its engine injector in 2003 and was produced under the Saipa brand After 2006 with name Saba(sedan) and Nasim(hotchback same design festiva) I have the 2017 sedan model of this car, and here we Iranians use this car a lot.

I just finished fixing my Pilot about ten minutes ago. It took me about twenty minutes to complete and that was largely just from finessing the plastic cover off and about ten minutes trying to get my hands behind the paneling to disconnect the engine button. Next time I’m getting my kids to fix this. They have small hands.

I bought an exact car that is in this video except mine is red. 4 spd, no a/c but dont need it on Oregon coast, it had a warped head, replaced that and drove for a while, until it started raining. She leaked pretty bad (old seals), She has a little rust and recently the carb started acting up, so I awaiting a carb adapted, going to install a weber 32/36 carb so my milage will be dropping. The best mileage I ever got with this car was 33mpg in town, not too bad, I am expecting that will be lower with the carb swap, but i'll bet she move alot better! Overall a great little car, it is scary to drive amongst all the 4x4 trucks around here, so the next "safety" feature will be a train horn install, that will be fun! One thing I did do was remove the rear seat and am thinking on removing the passenger seat as well (more space for stuff). The reason I removed the rear seat was when I had passengers in the rear I would bottom out when hitting any bump, so get rid of the rear seat, no more problem. Great video!!

Will it work on kia soul 2016 ?

Really need to ask a question about a 2006 Mustang bypassing the security system because the original keys were lost and don't have money to get keys replaced for car

Hey really need ask big question a 2006 Mustang how do I bypass theft system in it

Fantastic video! So much help, thank you!

Perfect 👍🏼🫡🫡🫡🫡🫡

What happen to mc?

One could add wire loom if they are concerned with shafing the wires. I used to install video recording hardware in the trunk of squad cars. We would push power cabel through the firewall to a center consol to power everything from the consol with a 15 minutes accesiry delay device that kept equipment powered for 15 minutes after the squad car was turned off. Then from that councle, power fused again and routed underneith the carpet along the driver side front and doors to behind the rear seat and into the trunk where the video recording equipment was mounted. I just bought my 2019 kia soul. While i dont think i will have need to power my center councle, i might still route the power through through firewall to the interor inder the door trim all the way back, to minimize wire shafing against the fame and body, and minimize road grime. Or, if i route it underneith, ill definitely add wire loom.

Worked great the first day. Second day sound cutting in and out. How do tell if cassette needs charged? Not sure if it's that or my phone

That truck looked like it had some life left in it.😐

You did a great job kinda parodying Doug here. I absolutely love these cars, I'm a sucker for tiny vehicles. Currently have a Suzuki samurai and it's amazing

Will it work on an automatic?

They have a fun go-kart vibe. I would love to find a 5-speed model. Coilovers, rims, fender flares and a nice paint job. Done. Stereo system too.

Thank you!

Isn't there some involved process to set the new bearing preload? How is that done? Something about spacers or something?

Thanks buddy ❤ now I can check out the random stuff that came in my glovebox when I bought it can't believe how easy it was

Jay Leno has one of these with a Taurus SHO mill installed in the ass. Apparently this was something you could buy through the Ford dealers, though the conversion was actually done by a third-party. It was called the SHOgun.