I was a professional mechanic for years, just curious to see how Austin explained the process . He did it better than I could . Great video

Perfectly describing the process. Fixed my truck under 20 minutes. And I’m not mechanically gifted at all. Great video!!!

Bro helped me immensely been without heat for the past 6 months and it's been getting cold here so thanks again

Best video for how to do this job. Just did this on my 2005 Yukon Denali with over 300,000 miles. Hardest part was lining up the holes to put the cover back on! Oh, and having to go back to the autoparts store to get a larger wire connector (need the largest ones for the red and black wires and the smallest for the purple wire). Harbor freight wire connectors $2. Advance auto wire connectors $9. In a hurry to beat the sunset, so had to go with $9 connectors. But I'm sure I saved about $300 by doing this job myself. Also, I went with the official GM part from Rock Auto rather than the cheaper knockoffs just because I didn't want to have to do this twice. One more thing. My reason for the replacement: Fan stopped working, or was intermittent. Then I'd hear it running after the car was turned off. Had to pull the fuse in the fusebox under the hood to keep battery from draining. After replacement, put the fuse back and now the fan works fine. Thanks for the great video!

Thanks to your video I was able to successfully install the part with no issues.

Thank you so much I have a 2004 tahoe and i think this will resolve all my problems.

Im not sure why you would have any thumbs down on tbis. This is the correct way to install the new Factory GM Part. Every other video i reviewed seemed to get this incorrect. Oreillys gave me the wrong part and others could not even find it. So i got this part from Cadillac. The resistor is falable done any other way. Nice job! Im about to do this, so ill follow up. I may have a question or 2, if I do and you have responded ill email you. Good work.

Thanks! I just used this to fix my '06 Sierra.

Order the same part on Amazon coming in tomorrow going to install it this weekend. Thanks

This was a very easy to follow video, thank you!

Excellent detailed video. It's exactly what I was looking for. Now, onto the dashboard lights video.

This video was well thought out. Helped w the exact tools required as well as slot screwdriver for the motor electric clip. Two thumbs up and subscribed now. ✌️

Thank you, my friend. Nice video.

Great video with awesome step by step instructions. Keep the DIY alive bredren 😎🤙🏽

My 2006 Silverado air conditioning doesn’t smell, but it stops working off and on. Had the coolant replaced and didn’t help. Compressor is fine. No leaks. The fan works fine. When the cold air stops on its own here and there, fan still going, the air seems more humid only then (when the cold quits) and smells slightly wet. It’s started the day I got it back from a fuel pump change…

Great Job Thank You! Best one on UTube!

Thank you this is very helpful and successful

Nice 👍🏽, thank u sir for the informative info ☝🏽!!

Most excellent! Thank you!

GREAT video Thank you!!!

Really like the content, very helpful. One small note if the music wasn't on it would have been easier to hear you.

Awesome bro !!!🤪

Big help! Thanks!!

Thank you for the help

Is there a part # on this updated resister? Great video

Do you know if this new part also fits the rear?

Replaced the resistor in my '04 Silverado last year and the other day the fan quit. Checked all the fuses, put a multimeter on the power wire to the motor and fount it was all good. Plugged the motor back in and voila, it was all good again. Must have been a loose connection to the motor.

Thank you blessings

My ac works but the digital part doesn’t how would I go about fixing that

Wat issue will it resolve by replacing that ?????? I wanna know to see if it helps with some issues

Did you ever make a video with the dash lights?

Great video! Is the resistor and wiring different for a dual climate control digital unit versus the non dual climate control? I have the digital dual and think I need to replace the resistor AND blower motor.

Was your ac/heater control screen displaying anything? Mine is displays something that looks like a capital letter L and a letter F. Non of buttons respond. I checked the fuses and relays, and did a recalibration but nothing changed. Would doing this repair fix my problem????

Excellent

I replaced my resistor harness but the resistor get hot before turning it on

Thank you

I see that your truck it not a Cadillac or a Denali but your control is the control temperature for your ac or heater a straight swap or do I need to change anything

I replaced my climate control module and still no heat and no air.. think this could be my problem

What gauge wire is the purple one

My blower doesn’t have a plug. Just got two wires Black and orange. Tried splicing them into the power n ground coming off the resistor and still nowing

If this part goes bad will the blower motor stop all together please let me know something soon I've been with out air for 3 days I just bought a new blower motor for $106 and ot didn't fix anything thank you

Thanks Brother

Do you have to replace the connector. Or can you just plug in the same old ones?

Could a bad resistor cause a parasitic draw on the battery? I have a 2004 Tahoe with a new battery, alternator, and a new climate control module. however I still get a draw of over 50 mili amps when checking the hvac circuit, I remove the hvac fuse and it drops to 29 mili amps

so my fans dont blow out air anymore is this something that could fix that? or is it a problem with the blower motor Ichecked the fuse and it was blown and i replaced it and it worked for like a day then stopped working again but the fuse is in good shape? i have an 05 sierra

Mine is constantly going out. I’ve went to oreilly pretty much every year and had it replaced. Anybody else run into this issue?

What is the part link?

For the ac switch is it possible to switch from a Manuel to a digital one?

Whats the fix for these things burning up?

If I get this right it's the blower motor resistor that tells the actuators what to do ? So if my newly installed temperature actuator doesn't change the temperature it could be the blower motor resistor that needs to be replaced ? I only get hot air at maximum setting... Thanks.

If purple was just twisted and grounded out would it blow a fuse or resistor

What was ur problem? Cause i got a 03 escalade and the a/c only blow some cold when im driving and if i stop the cold stops too. You think this might be the problem?

Any part number for the resistor with the wire harness?

Would this do the trick if im not getting ac cold air...i get hot air just not cold...

Did exactly what you did and now air only blows out my defrost vents in the dash? Is this common and or normal after replacement? Watched a dozen videos but no one mentions replacing the resistor first. Recalibrate? Fuses? Any advice would be helpful! Thank You!

Wait why is your 4x4 buttons on that side? Did you make your truck 4x4 or did you just rearranged the buttons

thx

I guess they were to cheap to put a plug on the end so you don't have to crimp.

My blower fan will stay on even with keys out of the truck. In order to not drain my batterey I took out the fuse in the relay box under the hood.

If I bought the original resistor instead of buying the updated version will that work as well?

I want to know how I can put that digital climate control on a truck that doesn’t have it like a 2004 Silverado single cab

Couldn’t quite watch the whole thing the music distracted stopped. When it started back up I turned it off.

I need sum strippers 🤣🤣🤣🤣😷 awesome job brother merry Xmas.

This music...WHYYYYYYYYY

Bro why did you have to do all this cutting wires and taping crimping and shit?

It's all bs. My 05 Yukon only works on 90°. I replaced the digital display and it did nothing. just a crock of crap It has had the resistor and harness wires all repaired and they went bad again for no reason. I hot wired direct using 12guage stranded copper wire and 30amp fuse at battery. Run wire to a new toggle switch then run wire to blower. Pull plug connector and use either wire for hot. For the other wire Connect a longer wire so you can Ground it to and body metal. Easiest to go into floor , just pull up the carpet and cut out that plastic and foam to drill a hole. Sand paper it shiny. Screw it tight. On my fused wire it's easier to connect into that red box by alternator. I tried a 20 amp fuse but it blew immediately. 8 ft of wire barely made it. Also my rear heat went out because I had pulled my battery cables off and somehow that deactivated the actuator inside the back unit. So I just pulled my battery cable off again and put it back on and it works fine each time that happens. Or just pull the HVAC fuse for a minute and then put it back on

The music is annoying

Why redo the wiring?

Thank you