04 Polaris Ranger 6x6 "Stuck In Gear" FIX

Рет қаралды 51,415

5 жыл бұрын

My 04 Polaris Ranger 6x6 was stuck in gear. It stuck in neutral actually but still wouldn't go into any gear. This is what I found.
Polaris Part #:
O-RING: #3233828
SPRING-COMPRESSION: #3233830
O-RING: #3233836
Polaris Gear:
Polaris Hoodie: amzn.to/2MHTFHw
OEM Shift Cable: amzn.to/2Wx901W
This video contains affiliate links, which means that if you click on one of the product links and buy, I'll receive a small commission.

Пікірлер: 47

@mossman381 5 жыл бұрын

Polaris Gear: Polaris Hoodie: amzn.to/2MHTFHw OEM Shift Cable: amzn.to/2Wx901W This video contains affiliate links, which means that if you click on one of the product links and buy, I'll receive a small commission.

@JohnSmith-zt9cq 5 жыл бұрын

I appreciate the hard work put into all of your videos. Keep up the good work

@donalddumas6987 3 жыл бұрын

Lol. My old English teacher told me the word unthawed doesn't exist. It's either frozen and the opposite is thawed. Lol! Regardless it is a very helpful and informative video. Thanks!

@mossman381 3 жыл бұрын

If you look it up they say it's a word. I can't say I got an A+ in english but I feel I can communicate pretty well. My spelling was horrible but has actually gotten better with all the comments and stuff I respond to. I see more words and that has really helped my spelling.

@rubensalais1502 5 жыл бұрын

Great videos, great explained videos, thanks, keep uploading you videos.

@user-fy7gt6ev5u 4 жыл бұрын

Great video!… And luck was on your side, I’m taking mine off and cleaning it and I don’t even have issues

@bishbash6547 5 жыл бұрын

Thank you Mr MossMan, very informational video and well laid out good job...👍👊

@mossman381 5 жыл бұрын

Glad you enjoyed it. There isn't a lot of info on these older Rangers.

@jimek5888 4 жыл бұрын

Thank you , I have a shifting problem and I hope you solved it. Funny thing, I was looking at that plastic over this morning. Tomorrow I'm going in. I hope it has a broken spring, it's Sept. here in Mn. , shouldn't be any Ice yet.Thanks again, great video, well done.

@mossman381 4 жыл бұрын

I would guess your problem is the spring unless you were hearing bad noises from the trans. Really easy to check the spring. I know it's not cold enough to freeze but you still might have water inside. That probably caused the spring to rust and fail. Good luck.

@woodcraft70 2 жыл бұрын

Good video. Thanks. Before the end of your video, I was ready to suggest using some contact cleaner spray. I've used it with good success in the past. But, it looks like the problem worked itself out. Thanks again.

@farmboy30117 5 жыл бұрын

Glad it was an easy fix! It's a wonder they didn't do internal damage beating on that linkage.

@mossman381 5 жыл бұрын

Or break the plastic cover. Someone beat on that lever hard.

@manuelpadilla5541 4 жыл бұрын

My name is Manny. What tool did you use to remove the cover to get to the spring?

@glenn9766 Жыл бұрын

Many thanks. Very useful for me mate. Regards Glenn Australia

@mossman381 Жыл бұрын

Glad it helped

@jdjerew7563 2 жыл бұрын

A+ video. I have a 2007 Polaris Ranger 6x6 and it’s hard to shift.

@mossman381 2 жыл бұрын

If it's hard to shift while running and then easy to shift when the engine is off it's probably your clutch.

@donaldreid3116 3 жыл бұрын

Had the same issue including the failure of the high range light. Not spending $100 for a switch on a 17 year old machine - just check the lever position for high gear

@carlosw4227 5 жыл бұрын

Our 2019 ranger north start shifter feels loose when it’s in park. And when we want to put it into high gear it feels like you have put it in pretty hard?

@mossman381 5 жыл бұрын

I haven't run the new 1000 Rangers so I don't know how they feel. I have run quite a few of the 900 Rangers and all of them seem to shift pretty stiff like. As for the loose feeling in park I would probably go back to your dealer. Maybe try out some other new Rangers they have to see if they feel the same.

@shanek6582 5 жыл бұрын

Riding my 2000 xpedition a couple days ago and something up front locked up and it stalled, I thought the engine blew up but once I got it in neutral it fired back up, put it in 4wd and made it home. It’s been too cold for me to even look at it, I’ll try this weekend to see what it is.

@mossman381 5 жыл бұрын

That doesn't sound good. I would see what the fluid looks like.

@shanek6582 5 жыл бұрын

mossman381 yeah as soon as this damn cold brakes, I’m crossing my fingers it’s something in the front end, it’s been taking spells where it pulls hard left or right, I have to put it in reverse for a foot or two and it’s fine, it’s an old beater, just haven’t had a chance to dig into it. Thanks mossman.

@Rob-we4ym 5 жыл бұрын

Mossman381, You and I have the same year of Rangers and I was wondering if you could make a video doing an oil change on your Ranger 500? Thanks,

@mossman381 5 жыл бұрын

Mine isn't due for a change but when I do need one I will get my camera out.

@Rob-we4ym 5 жыл бұрын

Thanks so much. Also thank you for making such fun and very helpful videos! :)

@tyhodges8455 5 жыл бұрын

our Polaris will not shift unless we turn it off. we can change gears easy when its not running. but we have to turn it completely off to do a gear shift. Any ideas on what is wrong?

@mossman381 5 жыл бұрын

Idle is to high or your clutch is shot.

@tyhodges8455 5 жыл бұрын

@@mossman381 Thanks we will try to idle down AGAIN tomorrow. hope its not the clutch. that will be another question for you! we have been watching your videos for the last 2 hrs. YOU ARE GOOD! thank you!!!

@mossman381 5 жыл бұрын

This problem with shifting was water related. It was stuck in gear and wouldn't move at all. The idle is set on the carb. You turn the little knob. You don't want the idle so low it kills the engine all the time. I had a Ranger with a bad clutch and I had to shut it off to shift it. That was before KZfaq so I don't have a video on a clutch replacement.

@TheHgmon 9 ай бұрын

What kind of grease did you use?

@mossman381 9 ай бұрын

Any good quality all purpose grease should work.

@guerom1367 3 жыл бұрын

Seems like im having all the same problems with my ranger as u have had with yours. Is the gear ahift cable the same as the 4x4 selector cable

@mossman381 3 жыл бұрын

These problems are very common on these older Rangers. Gear shift cable should be the same 4x4 or 6x6. The trans is in the same spot on both.

@guerom1367 3 жыл бұрын

@@mossman381 is the cable for the shifter that makes it 4wd or 2wd the same? Seems like these rangers r real problematic. Also i thought i changed all the fluids out when i got it. I changed the motor oil, rear differential, and transmission. I think i missed the front differential tho. Is this correct?

@mossman381 3 жыл бұрын

4wd is selected with a switch not a cable. If you have a 4x4 model the lever on the dash is for the rear diff lock. 6x6 models don't have a selectable diff lock. They are locked all the time. The front diff should have the fluid changed as well. Might be more important for the front diff because there is very little fluid in there.

@guerom1367 3 жыл бұрын

@@mossman381 thnx. Installed the gear shift cable but its struggling to go in reverse now. Probably need to adjust the nuts i guess

@mossman381 3 жыл бұрын

Yes, that is probably all it needs. Why was the shift cable replaced?

@michaelanthony3816 10 ай бұрын

Get a new plate gasket along with o rigs and spring.they will work cheap insurance. Good luck

@christopherwhite9319 5 жыл бұрын

Never heard of that happening

@mossman381 5 жыл бұрын

I have heard of the little spring breaking but never frozen water in there. By the looks of the beat on shift lever this has been happening for awhile.

@christopherwhite9319 5 жыл бұрын

mossman381 I’ll keep that in mind if I ever run into that problem with mine