043 From outcannel to incannel gouge - second life of vintage chisel

Рет қаралды 150,631

Күн бұрын

I need a incannel gouge for my planemaking. Some time ago my buddy Karol gave me that vintage gouge made in Sweden. In the video i'll show you whole process how to change the bevel side.
I hope you wil enjoy it!
Big thanks for my patrons!
Andrew Dawson
Joshua Lucas
Ross Tomažin
Javier Quintana
Rene Polak
Luboš Šulc
Ramingr
Jacek Wawer
Scott Martin
For support my channel click here:
/ @stavrosgakos
or use my PayPal account: esortodox@gmail(dot)com
Thank you!
....................................................................................................
For more check my instagram profile:
/ stavros_gakos
Remember to subscribe my buddy, Łukasz Giergasz
Click here:
• FrankenHebel - strug z...
Presentation: (0:00)
Grinding off the old bevel: (0:40)
Hardness check: (01:38)
Grinding off the old bevel: (02:09)
Grinding the new bevel: (02:22)
Presentation of the new bevel: (02:58)
Annealing: (03:07)
Hardening: (03:31)
Tempering: (03:59)
My letter to Santa: (04:16)
"Flattening" the back: (05:41)
The last grind of the bevel: (06:46)
The burr on the back: (06:52)
Sharpening: (07:03)
Removing the burr: (08:01)
Paper test: (08:17)
Fitting the tang: (08:36)
Testing: (09:27)
Presentation of the finished gouge: (11:17)

Пікірлер: 148

@StavrosGakos 3 жыл бұрын

@youtukang 3 жыл бұрын

🙏☕☕☕

@fabriziogamba4964 3 жыл бұрын

Bellissimo e molto utile grazie

@user-pt2sg9po3y 3 жыл бұрын

Two days, two videos, thank you)

@rdaugherty52 7 ай бұрын

Wonderful I just spent days re-profiling and sharpening 2 out-cannel gouges I think I would rather have a in-cannel now I am going to have to do it all over thanks for showing how you do it.

@nikburton9264 3 жыл бұрын

Good looking tool, Stavros! When the Grandkids stayed at the house, We always left Beer and pretzels, instead of milk and cookies. ST. Nik loved it at our house!

@rvelandi1919 3 жыл бұрын

I was scheptical when you put a front bevel on then bowl gouge, then I realized you repurposed the gouge into a beautiful carving tool. It’s just amazing your skill as a craftsman. Great!

@danceswithaardvarks3284 3 жыл бұрын

Very good video thanks. Full of fresh ideas for restoring old gouges.

@barkebaat 3 жыл бұрын

5:07 - beautiful shape ! This Christmas holiday I'll make a sturdy bench for my small Record lathe that I bought earlier this year. Then I'll teach myself to use it and I too can make good handles like this for my tools. And I can learn to make chairs, and tables with turned legs, and .... I'm looking forward to next year !

@JH-et7ig 3 жыл бұрын

Two new Stavros videos back to back....thats an early Christmas present itself. Thanks

@marcelofranco9728 3 жыл бұрын

Hello my name is Marcelo Franco I'm from Brazil, great vídeo my friend.

@slomkaadas9603 3 жыл бұрын

Fajna częstotliwość filmów. Aż czuć zbliżające się święta :>

@worklion50 3 жыл бұрын

At the end, I was screaming... be careful, or you will cut your ash off!... lol Brother, I love every minute. Thanks!

@oneshotme 3 жыл бұрын

Another great tool you've made Enjoyed your video and I gave it a Thumbs Up

@MakeOn 3 жыл бұрын

Very nice and handy tool! Great videography and editing as well!

@saddamhussain-iy7pj 4 ай бұрын

A great video dear

@wolfparty4234 3 жыл бұрын

Nothing but the best!!! Love it!!! ❤️🙏🏻👍🏻👍🏻

@guylabesseuille2716 3 жыл бұрын

Waouh, ça coupe !!! Magnifique.

@alexkorlev6604 3 жыл бұрын

Rewelacyjna robota! 💪❤

@jamesaldabo7767 Жыл бұрын

Je mets un pouce et j'enregistre avant que d'avoir regarde le tuto . Superbe . Bravo

@montelott8570 2 жыл бұрын

Another video well done, thank you for your inspiring skill share.

@BaruJanu 3 жыл бұрын

Genialnie jak zwykle 👏

@tommypouncey5667 3 жыл бұрын

Wow. Santa guessed the exact handle pattern and wood you normally use! Unbelievable luck.

@toddlarsen6215 3 жыл бұрын

Stavros - Beautiful build! I threw together a quick forge last night before a night shift with charcoal, fire brick, and a hair dryer to harden a cutter... forgot to temper... oven is heating as we speak :) Thanks for always inspiring! Good health to you and yours!

@StavrosGakos 3 жыл бұрын

Thanks a lot Todd!

@stanbrackhage 3 жыл бұрын

I have a whole bunch of EA Berg chisels from sweden that i love with the little shark on them. I found them at a garage sale.

@Val-rt9cf 3 жыл бұрын

Looks nice great job!

@MrJ23w 3 жыл бұрын

Jak zawsze.Pięknie.Pozdrawiam.A ten Santa to też ma fach w rękach.

@piotrciach1126 3 жыл бұрын

Kozacka robota. Brawo.

@luispacheco8745 3 жыл бұрын

What a way to start the day awesome 👌 👏

@green_building 3 жыл бұрын

I really enjoying your video it was real and i like the test of that gouge chisel when hitting the hard wood the sound is amazing 👍👍

@StavrosGakos 3 жыл бұрын

Thanks a lot!

@green_building 3 жыл бұрын

@@StavrosGakos youre most welcome bro 🙏😎

@luizgabriel3388 3 жыл бұрын

Yeaah! Two videos in a row!

@phooesnax 3 жыл бұрын

Nicely done. Thank You

@Aprendiz-de-Marceneiro 3 жыл бұрын

Fantastic job my friend 👏👏👏

@youtukang 3 жыл бұрын

Nice video 👍👍

@willyprenner4209 3 жыл бұрын

always great inventiveness

@melindajohnson3394 3 жыл бұрын

Nothing like Christmas to bring out the boy in a man. Hmm, maybe I should be writing one for a larger bandsaw. ENJOY!

@mikebeacom4883 2 жыл бұрын

I thought he was asking for an annealing oven…

@buczo102 3 жыл бұрын

Kolejne wspaniałe narzędzie uratowane od huty :)

@MartinPaulsen87 2 жыл бұрын

That's a beautiful gouge you got there, Made by E.A. Berg in Sweden. It could be very old. I have never seen a tang like that on one of their gouges. Great job!

@StavrosGakos 2 жыл бұрын

Thank you!

@congamike1 3 жыл бұрын

Thank you! I learned some things.

@StavrosGakos 3 жыл бұрын

You're welcome Mike :)

@ikust007 3 жыл бұрын

Another splendid video ! Inchannel Chisels are extremely hard to find .

@joycemiller4716 3 жыл бұрын

Not in England

@williamoverton7265 3 жыл бұрын

Fantastic

@yvesdesrosiers2396 3 жыл бұрын

Nicely done as always. Thanks for sharing.

@luizmorgado1252 2 жыл бұрын

Bom dia,descobri seus vídeos recentemente e não paro de te admirar,vc é um artista muito talentoso e me faz recordar meus tempos de infância quando na década de 1970 ficava vendo meu avô fazendo suas ferramentas em sua marcenaria, obrigado por me fazer recordar esses momentos que passei com ele, que Deus te abençoe

@StavrosGakos 2 жыл бұрын

Hey, you're welcome Luiz!

@shakeelchauhan2503 3 жыл бұрын

Nice video, it's a carving in-cannel gouge you made. the exact shape but around 17 to 20 inch long, a woodturning gouge is used by the professional turners of Pakistan. this in-cannel gouge is the only tool these turners use, from start to finish. from rounding to finish piece . after they finish honing the edge, they take a round steel bar 3 to 4 mm thick, like a screwdriver can also be used. they press the edge with it, firmly and even pressure of hand, from the outside of the bevel edge, from one end to the other. pressing the steel bar on the edge, from outside at a 45 angle. this technique will bend the burr of edge inwards and will cut wood like butter. i haven't seen any such gouge used by western turners till now. I'm a member of many woodturning groups on facebook. hope you find this interesting .. lolls

@StavrosGakos 3 жыл бұрын

Thanks! So they make a scrapers, nic to know about it. Thanks!

@rodolfogilvanfantim2822 3 жыл бұрын

BELISSIMO, PARABENSSSSSSSSSS

@afmayday 3 жыл бұрын

looks like an erik anton berg gouge, great tool.

@jamesalsup9135 3 жыл бұрын

What a great tool that will be!

@errorcode1249 3 жыл бұрын

You should draw some circles on the Velcro sander so you can position the sandpaper easier

@Cowboy_Ash 3 жыл бұрын

Merry Christmas Stavros. 🎄

@StavrosGakos 3 жыл бұрын

Merry Christmast Ash :)

@TomeRodrigo 3 жыл бұрын

Nice Eskilstuna chisel..

@awldune 3 жыл бұрын

Great!

@nomercy1523 3 жыл бұрын

Good work From germany

@nurgle11 3 жыл бұрын

2 in a day :D thanks Stavros

@StavrosGakos 3 жыл бұрын

You're welcome Andrew :)

@lovetools2685 3 жыл бұрын

At first I read “coco beer”... anyway, Santa was very kind. And it’s not even christmas yet

@ramingr 3 жыл бұрын

Another video that fast? You are spoiling us 😁

@StavrosGakos 3 жыл бұрын

I hope 😊

@magnusjohansson1720 3 жыл бұрын

The maker of your chisel in the video E.A BERG Eskilstuna Sweden. Yours are an early chisel. 1920-1940 Good quality in the iron.. i love your videos by the way..

@StavrosGakos 3 жыл бұрын

Thank you Magnus!

@bryantretheway3809 3 жыл бұрын

Comment and question. First it is so nice to see you settled in the new place and making videos again. Question: what is the benefit of having the bevel on the inside? My gouges have the bevel on the outside and I put a small secondary bevel on the inside to make it stronger.

@StavrosGakos 3 жыл бұрын

Thanks a lot Bryan! It is only my personal preference. Nothing more. I feel that i do my work better with incannels. Regards!

@acidxero 3 жыл бұрын

Beautiful work, as always.

@augustoivanpintoperez992 3 жыл бұрын

Gracias stavros

@irvinwittmeier5208 3 жыл бұрын

Nice !;-)

@attilabori4734 Жыл бұрын

What sort of grinding wheel you used for the inside grinding please? (Shown from side only:((( Standard or is it some sort of profiled/thin one? Thanks and great video. Ps.:nice kitchen😇

@StavrosGakos Жыл бұрын

Hey, thanks! It was thin stone for chain sharpening 👍

@davedavem 3 жыл бұрын

I need a gouge!

@lorenzorepetto4748 3 жыл бұрын

Hello, your video are wonderful. Could you tell me the brand of the gouge in this video? Thanks.

@StavrosGakos 3 жыл бұрын

Thank you! Somebody write in the comment that it is Berg gouge. Regards!

@davidneale-lorello2954 3 жыл бұрын

You've had a few videos in which you harden soft steel blades. Could you do one where you talk about the process explicitly, explaining exactly what you're doing and why? It's very interesting to see that you are so successful with this using home equipment.

@StavrosGakos 3 жыл бұрын

Thanks David! I just trying keep to few simple rules, you can read about it in many sites/books/etc. Hardening is not something special for me, i don't want to make another video about it, yt is full of it:) Regards!

@richparker7778 3 жыл бұрын

Any chance you could show how you would sharpen a V gouge ? I really enjoy your videos and especially the ones of late where you are talking. Cheers from the good ole USA.

@StavrosGakos 3 жыл бұрын

Hey Rich! Sorry but i don't own any.. Cheers:)

@scottb.2022 3 жыл бұрын

As you were grinding the inside bevel, you were cooling the blade in water. Since you were going to reharden and temper the blade, why was the cooling necessary?

@mikeyutube 3 жыл бұрын

I thought the same then realised it was probably getting too hot to handle.

@StavrosGakos 3 жыл бұрын

I make cooling always because i don't want to burn the cutting edge. I know that some people say that it doesn't matter before hardening, but i don't. If you burn the edge the steel is not homogeneous. Normalizing can repair it but not with every kind of steel. That's why i am careful. Secondly the burned edge makes the whole work uncomfortable :)

@StavrosGakos 3 жыл бұрын

You got the point also, it can't be too hot to hold 👍

@DanielH 3 жыл бұрын

I want one

@UnderLeakingRoof 2 жыл бұрын

Na jakim kamieniu szlifujesz fazę? To jest normalny krążek z ostrymi krawędziami czy coś dedykowanego (wypukłego)? Właśnie wpadło mi takie dłuto i muszę je naostrzyć, chociaż już widzę, że raczej nie będzie to mój ulubiony profil 🙂

@StavrosGakos 2 жыл бұрын

To wąski kamień do ostrzenia pił łancuchowych

@UnderLeakingRoof 2 жыл бұрын

Tylko trochę strach rozhartować tę delikatną krawędź.

@StavrosGakos 2 жыл бұрын

Wszystko z głową i nie rozhartujesz.

@anderspalm9107 3 жыл бұрын

Swedish steel 👌🦈

@youtukang 3 жыл бұрын

Good ☺👍👍

@StavrosGakos 3 жыл бұрын

Thanks!

@adamik62 3 жыл бұрын

Super! Byłbym wdzięczny jak byś pokazał jakieś swoje patenty na ostrzenie dłut profilowych do rzeźbienia. Oglądając twoje filmy widzę, że lepszego rzemieślnika jak to się mówi "ze świeczką szukać" :) Czyli jesteś najlepszy! Ja na starość zaczynam przygodę z rzeźbieniem i jakoś mi nie wychodzi ostrzenie. To trudna sztuka. Pozdrawiam serdecznie Adam

@StavrosGakos 3 жыл бұрын

Dziękuję bardzo :) niestety nie posiadam dłut do rzeźbienia.. Może kiedyś :)

@rodrigoquevedo9441 3 жыл бұрын

Very good! Kkkkkkkkk

@StavrosGakos 3 жыл бұрын

Thanks!

@paulwomack5866 3 жыл бұрын

Those intending to follow this example - be careful, and check before you invest a lot of time. Some chisels are made with applied steel; in an axe the steel is inserted between the cheeks, so that it forms the cutting edge. In a chisel (and older plane blade) the steel is laminated onto the face. The rest of the tool is soft iron. IF THIS technique is used for a gouge, only the original edge (be it incannel or outcannel) can be hardened. You CANNOT cannot repurpose it. (The Berg in the video appears to be hardenable steel throughout)

@StavrosGakos 3 жыл бұрын

Hey Paul! You have absolutely right - laminated tools are good only with existing high carbon steel. Without it they are not to use. Regards!

3 жыл бұрын

Odpaliłeś starą kuźnię? Nooo panie :-000

@StavrosGakos 3 жыл бұрын

Musiałem ;)

@BaruJanu 3 жыл бұрын

Jeszcze tylko kowadło, trochę czasu i robić samemu...

@michelvidal7666 3 жыл бұрын

To jest bardzo dobre, ale w zasadzie musisz wykonać kątową regulowaną podporę, aby szlifować żłobienie ... Bardzo dobre do ostrzenia grzbietu za pomocą tarczy ściernej. Ponadto żłobienia nie ostrzymy papierem ściernym, ale okrągłym kamieniem Arkansans najlepiej ... Do trzymania rękojeści narzędzia potrzebne są szczęki Vee ... Michel VIDAL - złoty medal

@StavrosGakos 3 жыл бұрын

To co pokazałem na filmie działa, więc nie muszę ;) pozdrawiam

@michelvidal7666 3 жыл бұрын

To nie jest odpowiedź ! Michel VIDAL - złoty medal

@saddamhussain-iy7pj 4 ай бұрын

Hi from Pakistan...

@pmewUK 3 жыл бұрын

Christmas early! Any more videos hidden up those Santa sleeves?

@StavrosGakos 3 жыл бұрын

Only Santa knows :)

@jpkalishek4586 3 жыл бұрын

you had a visit from Insanity Clause!

@hshanoo 3 жыл бұрын

:) Pozdrawiam serdecznie! :)

@StavrosGakos 3 жыл бұрын

Również pozdrawiam :)

@user-yi3by6jm4n 3 жыл бұрын

👍👍👍

@youtukang 3 жыл бұрын

👍🙏☕☕☕🤝🇮🇩

@fainderskurs-koi8767 3 жыл бұрын

Лайк. Но насколько помню, то проверяют остроту на чем то мягком. хотя бы вербу, или липу.

@dontspoilmyride4905 2 жыл бұрын

Eskiltuna gauge

@johnritchie3889 3 жыл бұрын

Wow. How did you know that I’m doing this right now?

@StavrosGakos 3 жыл бұрын

Santa told me ;)

@tomnorton8218 3 жыл бұрын

What kind of beer???

@StavrosGakos 3 жыл бұрын

Pilsner👍

@wojciechdobropolski1821 3 жыл бұрын

Stawros masz cudny polski akcent ,mam nadzieję że sie nie mylę ,pozdrawiam

@StavrosGakos 3 жыл бұрын

Dzięki Wojtek :) również pozdrawiam!

@gustavoandreschibaack7663 3 жыл бұрын

Why not make a chisel triangle outside and inside?

@StavrosGakos 3 жыл бұрын

But how? :)

@gustavoandreschibaack7663 3 жыл бұрын

@@StavrosGakos Just need a chisel plane and a angle grinder to make a triange inside and outside

@yspark5930 3 жыл бұрын

Good🤗🤗🤗🤗🤗🤗🤗💘💘💘💘💘💘💘💘💘💘

@grzegorzchilkiewicz5652 3 жыл бұрын

sweden to sweden,pozdrawiam

@StavrosGakos 3 жыл бұрын

Pozdrowienia

@jainarayansharma4213 3 жыл бұрын

कौन सा तेल है ज़रूर बताएं

@StavrosGakos 3 жыл бұрын

Hey, i don't understand

@CPlus_ 3 жыл бұрын

W całym procesie widzę jeden błąd. Mogłeś upiec bułki dla rodziny w czasie odpuszczania.

@Wood135 3 жыл бұрын

BẠN CÓ BÁN SẢN PHẤM KHÔNG

@StavrosGakos 3 жыл бұрын

Hey, please read description. Regards

@TomasRosberg 3 жыл бұрын

That's a Berg turning gouge, not so common to find!

@TomasRosberg 3 жыл бұрын

@@WinkenBlinkenAndNod I would love to find one myself... One day 🦈🇸🇪

@omardumbrell435 3 жыл бұрын

It’s about a quarter of a Berg turning gouge.

@mr-x7689 3 жыл бұрын

this is not adviced to do to old tools. If it's hand forged, so will it only have steel on one side. + grinding away that mutch material puts the tool at risk of getting blued. Bluing happens when the metal gets heated up to a point where the hardening of the steel goes away. thus making the tool incapable to hold an edge. Knowledge from a blacksmith.

@StavrosGakos 3 жыл бұрын

Thanks! There was enough high carbon steel to make it once again. But you have right, laminated tools are not good for it. Regards