#1 Easiest Trick to DRILL STRAIGHT! (Drill at Perfect 90 Degrees...Fastest Method!)

Рет қаралды 508,739

5 ай бұрын

Check Out Our Free Guide: 10 WORST POWER TOOL MISTAKES!!
www.thehonestcarpenter.com/
Learn Power Tools Today with POWER TOOLS EXPLAINED!:
www.thehonestcarpenter.com/po...
AFFILIATE TOOL LINKS:
Milescraft Drill Block:
amzn.to/3RBmclb
Kreg Drill Block:
amzn.to/3RC8aQ7
Big Gator Metal V-Drill Guide:
amzn.to/4a8nefL
30 /45 / 90 Drill Guide:
amzn.to/489qgP4
Dewalt 14-pc Drill Bit Set:
amzn.to/3GEcFDI
(Please Note: These are Amazon affiliate links. When you shop through these links, we receive a small commission at NO EXTRA CHARGE TO YOU!)
#1 Easiest Trick to DRILL STRAIGHT! (Drill at Perfect 90 Degrees...Fastest Method!)
Drilling straight into wood or other materials can be very tricky, especially for newcomers. But this short video from The Honest Carpenter will show you what is, by far, the easiest and fastest method for boring holes at 90-degrees with a corded or cordless drill!
A Drill Block is a great way to imitate the efficiency of a drill press.
These little handheld tools help create the initial line-up for drill bits of various sizes, thanks to their calibrated metal sleeves.
Drill blocks can also be used on corners, and even rounded materials.
Thanks for watching!
The Honest Carpenter

Пікірлер: 380

@koconnor 5 ай бұрын

Another advantage of using something like this is that it teaches you what being perfectly vertical feels like with your drill. It can improve your free hand drilling.

@rk5941 5 ай бұрын

I know you have expanded and grown your business. But I have to tell you I really appreciate this type of content. I remember when you first started you had very practical content for guys like me who do not have fancy tools. We have a saw, drill , hammers and screw drivers and of course a carpenters knife and paint brushes. Thank you for this very helpful practical video.

@TheHonestCarpenter 5 ай бұрын

You’re welcome, RK! Always happy to help 🙂

@VaQm11 5 ай бұрын

Amen!

@gurudogg123 3 ай бұрын

Agree!

@jonathancharczenko7713 5 ай бұрын

It's not a trick, it's a tool.

@MetalNick 20 күн бұрын

Tools do tricks. But yeah you have a point.

@Frost.7xx 17 күн бұрын

The click bait is real. You’d think he’d show the “tool” in the thumbnail ☠️

@user-qy9es4dn8v 17 күн бұрын

I tell you

@markk8225 5 ай бұрын

TIP for centering the drill block EXACTLY where you want to drill. Use an awl to make a small indentation where the center of your hole is to be. Using a small bit - maybe an 1/8", drill about 1/8" deep freehand. Now fit the bit that is the size of the hole you want to make. Slide the drill block over the bit and all the way up to the drill chuck. Now, while holding the drill block against the chuck, you can place the tip of the bit exactly into the pilot hole while keeping the drill as vertical as possible, then slide the block down to the surface of the work piece. Now, while holding the block firmly, if it is not completely seated flush on the work piece, adjust the drill until the block is completely flush to the work piece and now your bit is exactly perpendicular and you can drill to the desired depth. For large diameter holes just use this process starting with smaller diameter holes and work your way up to the final desired diameter. This ensures the location of your hole is dead center of where you want it!

@conorstewart2214 5 ай бұрын

@peterm2227 yeah that seems much more useful than them doing the exact same thing but drilling a pilot hole first. It’s probably also more precise to just start with the tip of the bit you will be drilling with than their method, it’s probably easier to centre the point of a drill on a mark rather then centring the tip of the drill bit in a hole. It’s much faster too to just use a single drill bit and not have to worry about changing bits.

@betz999 5 ай бұрын

@conorstewart2214 that's how you crack wood

@sallyjoshelton475 4 ай бұрын

Thanks, Mark.

@TheFloridaPappy 3 ай бұрын

I made about the same point (except for the awl) then saw yours. Guess I'll delete mine now.

@SHOGUNTE 5 ай бұрын

I actually used the same one for drilling into tiles. The resistance and smoothness of the ceramic would often force the bit to drift without having a chance to get purchase. Because of the rubber on the bottom of the guide block, it stayed steady long enough to actually do its work.

@davidwillard7334 Ай бұрын

Theres a simple Trick , Drilling into Ceramic Tiles , But you will have to watch ! My you Tube , if ever l decide to go Ahead with that !

@scottym3 5 ай бұрын

I'm a retired CNC Machinist and although I didn't need something like this, what I did need on occasion was a tapping block. Same concept but just for starting a tap straight. Made quite a few for me and newbies that came into the shop and they were so surprised and impressed there was something like that around. Not sure how long these have been around but now that I don't have a huge machine to drill my holes, this will definitely be on my Christmas list. Thanks for all of your helpful videos. Happy Holidays to you and all that visit.

@doreennewman7182 5 ай бұрын

I'm a senior female, I got one of these years ago. I noted that when I'd see others drilling, they'd appeared to be doing so at an angle, even did so myself. So invested in one of these myself. I love using it when needed ! Men folks don't expect me to know and have these little "do dads" on hand !😅😅😊

@RYwoodview 5 ай бұрын

Even better is a drill with integrated levels. That's why I'm still using my 1990's blue Ryobi drill. It has a horizontal level on top and a centering level on the back of the barrel, so both horizontal and vertical drilling is true. This no longer seems to be part of drill/drivers today, which is a huge oversight.

@ralphhenderson5276 5 ай бұрын

I glued a surface level to the butt end of my Makita, and it’s saved me a lot of time and trouble. Unfortunately there’s no room on top for a horizontal level.

@b3arwithm3 5 ай бұрын

I did the same but for this to work the piece has to rest on a perfectly level surface

@pazu8728 5 ай бұрын

I have that drill still and love the level. Unfortunately all my batteries are dead.

@RYwoodview 5 ай бұрын

@@pazu8728 FYI, all Ryobi batteries fit all Ryobi tools, no matter how old.

@American-Plague 4 ай бұрын

You would think this would be cheap enough that all major drill manufacturing companies would design this into their drills. Unfortunately, EVERYTHING seems to be just getting to be more and more poorly designed pieces of shyte. I've been through 3 DeWalt impacts this year. The first one, I only drove 6 lag bolts with it before the bearing in the chuck broke so the driving bits fall out. This is a huge hassle. Especially if you're up on a ladder or scaffolding. The other 2 didn't last much longer. The FIRST 20V brushless DeWalt impact I had, when they first came out, lasted several YEARS before that bearing broke. I'm so sick of companies making everything cheaper and shittier but charging more and more money for their products.

@trentthompson2928 5 ай бұрын

I got the same one when I wasn’t drilling straight for cornhole legs. Big difference for a novice like myself. You hit the best issues ALL OF THE TIME!!

@user-em6ie2be7x 5 ай бұрын

Never knew a tool like that even existed. Thanks Ethan for the heads-up. 👷🏿‍♂️

@TheHonestCarpenter 5 ай бұрын

Sure thing, W! 😄

@hombre3000 5 ай бұрын

Great video. I’ve found that using my middle finger (instead of my index finger) on the trigger of the drill has significantly improved the accuracy (angle) of my drilling. Your index finger ends up along the side of the drill, pointing in the direction you want to drill. Give it a try!

@Paul.Douglas 5 ай бұрын

Yep! This is a technique we used in building airplanes, along with using an "egg cup." It does exactly what you said.

@MarkoVukovic0 4 ай бұрын

I'm 49 and up until now, I didn't know these existed. What a simple and brilliant tool. Thank you!

@mpxz999 5 ай бұрын

I didn't know they had saddles to sit on the edge of lumber!! That's so cool!! I could do dowel holes like that! Thanks!

@darcyw156 5 ай бұрын

25year carpenter, and this vid was great. I have never used one of these, and now I will be buying one tomorrow. Thanks for the tip!

@davidcooper2516 16 күн бұрын

Same here!

@miket2120 5 ай бұрын

I've been using one for years. Since I work with 6 different brands and sizes of drills/impact drivers, no two of them have the same feel. A drill block gives me consistent accuracy with all the drills I use.

@FrankTroiani 22 күн бұрын

1) I love that you came out and are endorsing a drill block/guide. These little guys don't get enough praise. I don't know if people are embarrassed to use it or think it's gimmicky, but it really does the trick. I guess that's why you're The Honest Carpenter! 2) AMATEUR-TIP: Instead of having to worry about sighting your drill mark through the hole, or using a center punch as other comments mentioned, I go with something even simpler, and I think more accurate: Slide the drill block over your drill bit and slide it back towards the chuck before you go to drill. Put your drill bit down onto your drill mark, then slide the drill block down onto the wood. It makes sure your drill bit is where it's supposed to be without the drill block being in the way. Disclaimer: This tip is definitely a bit late, and I admittedly only glanced over the first 30 or so comments to make sure it wasn't a duplicate, but I apologize if others have mentioned it already.

@kinderliving1 5 ай бұрын

As someone who is brand new to the DIY world, these helpful tips are so useful. Thank you.

@TheLovelyMissBeans 5 ай бұрын

Milescraft is a great brand with lots of practical little gadgets. You should check them out.

@billm.8220 5 ай бұрын

Who said you can’t teach an old dog new tricks. lol Learning new things from you pros all the time. Appreciate it a lot Ethan. Keep up the good work my man !!

@TheHonestCarpenter 5 ай бұрын

Thank you Bill, will do! 😄

@davesmith9844 11 күн бұрын

Amazing, thank you. I've been looking for something simple, quick and reliable. You answered all three!

@Kevan808 5 ай бұрын

I never knew something like this existed. Thanks for another very useful video!

@sleepinglioness5754 5 ай бұрын

Fabulous! Prevents it from bouncing around as well. Thanks, HC...this is terrific.

@FusionDeveloper 3 күн бұрын

You said "$10" and i see online some prices of $8, $10, $13 and more($23, $33), so saying $10, at this time, is spot on. You could get one a little cheaper, right at $10 or a little more expensive. I'm soo used to people saying "you can get (insert product) for just $5" and bragging the whole video about how $5 is soo affordable and it being + $15 shipping and only available online, so the shipping is not optional, meaning, they are misrepresenting the price, especially when those items are a $15 shipping per item, so 2 items = $30 shipping. Thanks for being Honest. Oh, haha, "The Honest Carpenter", (Now Subscribed).

@cathycraig1301 5 ай бұрын

2:57 really helpful. I’ve bought several of the items you show us as presents for my friends and relatives. Lots of workmen don’t know about a lot of these helpers.

@FowlerAskew 5 ай бұрын

I haven't really been that interested in these, but seeing how easy it makes drilling into a pipe or at an angle might have sold me on it Another tip I learned from Rex Krueger is to keep a 90° reference in your sight line while drilling or making a square cut. Just having the vertical edge there will make it easier to intuitively hold the drill vertically

@maggienelson4437 5 ай бұрын

I've been subscribed for a good while now, and THIS is exactly why! It's all these little hints and tidbits that make you a great resource for amateur me! Thanks a bunch!

@eurasia2941 Ай бұрын

Very useful tip. Thanks a lot.

@cugamer8862 5 ай бұрын

Very timely video, I'm doing a lot of drilling and something like this will be a big help to me. Only downside is that now I have to buy another tool. Oh darn, oh heavens no, twist my arm.

@maggienelson4437 5 ай бұрын

twist twist twist (is it working yet?)

@victorsvitilla9064 5 ай бұрын

I'm glad you're posting new content

@chrisdoutre101 5 ай бұрын

This is a great tip. And very timely. I have to drill some deep-ish holes into the edge of 3/4" MDF to mount some furniture leveling feet. In the past, my wife would 3D-print a single-hole drill guide for me; I had no idea these multi-hole guides existed. I like Kreg tools, so I bought a Kreg drill block. I can't wait to get started. Thanks for the video.

@markwigdor7505 5 ай бұрын

Thank you for providing such incredible great advice.

@avivat3010 5 ай бұрын

Short and sweet! Great tips, thank you!

@Love-kq7iy 5 ай бұрын

I've always struggled with this. I'm about to be putting some cabinet handles in and will definitely use a block like this to make sure my holes are straight all the way through!

@TheLovelyMissBeans 5 ай бұрын

You might want to get a cabinet hardware jig. Kreg has one for about $25.00 It allows you to set up where your holes are gonna be drilled on each cabinet, in relation to the edge of the door, so once you have it set up,you take the jig from one door to the next, clamp it on, make your holes and move on. Otherwise, you have to measure for each door, and you are bound to have a couple of them end up off a little bit.

@GregLanz 3 ай бұрын

I happened across the milescraft block a few year ago and really liked it, great to know I'm not alone!

@jamesp739 5 ай бұрын

Super simple and versatile too. It'll make a great stocking stuffer! Many thanks for all you do, I always appreciate your posts. Merry Christmas!

@glennryzebol4472 5 ай бұрын

I highly reccomend one of these drill blocks. SUPER cheap and super handy. I'm reaching for it in these situations often in our shop.

@Freddie2598 5 ай бұрын

Ethan years ago DeWalt use to have a 3/8 corded drill that had a level on the back of it for drilling straight but these days all the drills have gone away from that simplicity

@TheHonestCarpenter 5 ай бұрын

You’re right Fred-a handful of models still being made today, but not by many companies!

@geoffarcuri7877 Ай бұрын

This is great! Thanks for posting this.

@wilelee 5 ай бұрын

Unreal Eric! I was not aware they even made drill blocks. Especially drilling at an angle, or the one with lines on the side.I appreciate your sharing, which adds to my gaining more knowledge and tools! 👍⚒🔧

@johnkelley9877 5 ай бұрын

This was a big help! Thanks for sharing this.

@xp3lo835 5 ай бұрын

Great tip,thanks

@audiophileman7047 5 ай бұрын

I could have used one of those blocks recently, but didn't know about them. Thanks for this tip for my future projects. 👍👍👍

@garymiller5937 5 ай бұрын

Thanks Ethan. It looks so easy I have to get one! You're the best. 😊😊😊😊❤❤❤❤

@bv2999 5 ай бұрын

Nice vids. Straight to the point with details and accuracy. Thanks!

@MarkTubeG 5 ай бұрын

Just ordered it! Thanks.

@DragonBiscuit 5 ай бұрын

VERY useful tip - thanks!

@eozen81 4 ай бұрын

Very effective solution, especially for the ones who are not expert but curious for simple handwork. Thanks mate.

@neolithic3 5 ай бұрын

Very cool little tip!

@GrantHendrick Ай бұрын

Many of us greatly appreciate your tips. Thank you.

@james9789 4 ай бұрын

Brilliant that mate ,Happy New Year.

@KeritechElectronics 4 ай бұрын

Mighty cool. Thanks for the tip.

@JoseHernandez-im4wz 5 ай бұрын

Great guide man...! Thanks

@DannyDangerOz 5 ай бұрын

I had no idea these existed! Your channel is the gift that keeps on giving. Thank you!

@freedom1028 5 ай бұрын

Excellent method. Thanks!

@kevingill648 3 ай бұрын

Although I'm originally from New Marske (1956-1981) I went to senior school in Marske by the Sea, back then it was called Bydales County Modern and I left in 1971. I met my first girlfriend in Marske Square and have spent many hours on the beach, it was even part of our school cross country course. This video brings back great memories. Thank you.

@johnenglish929 5 ай бұрын

Brilliant ! I wasn’t aware of these but will get one. Thank you.

@narn3904 2 ай бұрын

Brilliant. Thanks👍

@danalaniz7314 5 ай бұрын

This is great! I've never seen anyone demonstrating a drill block and I appreciate the tip. Thanks!

@clavo3352 4 ай бұрын

Excellent illustration.

@larrycainjr 5 ай бұрын

Great tip, Ethan! Just in time for Christmas too.

@ronhutcherson9845 5 ай бұрын

Thank you. You solved a bunch of problems for me in just 3 minutes.

@David.M. 5 ай бұрын

Thanks Ethan. I have that exact block and it is great. Cheers

@monkeygraborange 5 ай бұрын

I confess to a smidge of resentment for not having invented these simple, but oh so necessary little gadgets in my youth. Hopefully, whoever did is rolling in the green!

@TheHonestCarpenter 5 ай бұрын

Agreed, monkey! 😆

@virgilflores8754 3 ай бұрын

I always like your videos. They are well done and informative.

@brianb1179 5 ай бұрын

Great tip , i worked in the aviation for over 35 years , way way back , we made our own using a drill press or having the machine shop make them. They definitely are practical , love watching your videos 👍 awesome stuff

@abrogard142 2 ай бұрын

I'd think to make my own but where am I going to find a block of steel that thick?

@rodneyhammon1793 3 ай бұрын

Thank you!…you’re the best

@patrickzadd5215 5 ай бұрын

another wonderful, useful video thanks

@MartyInLa 3 ай бұрын

Wow what a great, simple, and inexpensive idea! Thank you so much, I'm definitely going to get one!

@pqrstsma2011 5 ай бұрын

thank you for showing me such a thing exists; i'm gonna check it out and buy one for myself ASAP!

@cakeman58 5 ай бұрын

Thanks. I've never even seen these before while browsing tool sections. Got you another sub.

@ed6837 5 ай бұрын

Also, when drilling put most of the pressure on the end of the drill opposite the chuck....not on the pistol grip. You will break less drill bits that way especially in metal.

@krzysztofmathews738 5 ай бұрын

Very helpful. Thank you!

@jeffwalther 5 ай бұрын

I can use this tip! Thanks!

@Joe-xy3vy 5 ай бұрын

I glue a bubble level to my drill. For vertical holes, that works well, but obviously doesn't do much when you want a horizontal 90` hole.

@pah9134 5 ай бұрын

I love your content. These tips are such a great help. I am also in awe of how neat your shop is. 🤔

@VaQm11 5 ай бұрын

This helpfull, thank you!

@Here4TheHeckOfIt 2 ай бұрын

I'm a noob and horrible in the shop 😂 I like these simple suggestions. Worth their weight in gold 🥇

@jbylin 5 ай бұрын

Thanks again. Great tip.

@michaelblackmore883 5 ай бұрын

Good tip thank you. I have ordered two from Amazon UK.

@SD45-ET44AC 5 ай бұрын

I have that exact drill block & it works great plus stair stepping your drill bits is an excellent idea.

@killpop8255 4 ай бұрын

Did not know of these. For tubes very interesting.

@andyflannigan6432 5 ай бұрын

I love tips like these!

@cliffg4437 4 ай бұрын

Age 69, nobody ever told m about drill blocks before!

@narn3904 27 күн бұрын

Me neither

@mahamedhossainjeelany6772 5 ай бұрын

You just genius and you are truly "the honest carpenter" ❤

@edwardweis9481 5 ай бұрын

Thanks for sharing this . I added it to my Christmas list !

@Derek-ld4kn 4 ай бұрын

This is fantastic, thank you!

@susanhenley8240 5 ай бұрын

And it'll fit in my Christmas stocking! 😊

@alexreid4131 5 ай бұрын

This is the exact drill block that I have. There is a bit of wobble with it but overall I am happy with it.

@TheHonestCarpenter 5 ай бұрын

I like it too, Alex!

@dennisbishop3842 5 ай бұрын

Good recommendation 👍

@dongeorge4037 5 ай бұрын

I never thought about this technique, but I should have. Thanks.

@skyborne6393 5 ай бұрын

This guy is the best. Very valuable information, knowledge and experience 🙏😁❤👍

@gsilcoful 5 ай бұрын

Thank you!

@derrickbaranowsky5715 5 ай бұрын

You sir have a consistently great channel!

@pamflowers8364 5 ай бұрын

This is a very useful tool and video. To mark where I want to start drilling, I usually use a nail-set to make an indentation, then place the block over the hole, the tip of the bit will settle into the indentation and allow me to find the exact center.

@doug_1489 4 ай бұрын

been looking for a solution like this one...thanks a wack! 👍🏼

@rchydrozz751 5 ай бұрын

I have one of those DrillBlocks. They work great when having to drill a quick perfect 90° hole.

@gizmo7877 5 ай бұрын

Perfect for me. So many times without making a pre hole, with a nail, my drill would go in crooked. I saw this somewhere and though it’s just what I need. Thanks for showing how to use it.

@KoMar551 3 ай бұрын

This is a great 3:10 add! Thanks

@camogirlkm 5 ай бұрын

I have numerous Milescraft products including the same drill block. They are definitely a company to check out for more affordable options for wood working. They may be cheaper than big names but they aren't cheap quality.