#1 Issue with Flat Bottom Jonboats

Рет қаралды 17,343

Жыл бұрын

I see this issue with a lot of flat bottom Jonboats. They just are not as strong as the V nose models. It's simple engineering the entire hull coming to a point makes them extremely durable compared to the square nose. I have seen some improvements in some of the newer models, but it's definitely an issue they know about. This repair was a bit dramatic but after so many patch jobs I thought it was the best solution. I feel confident that this will no longer be an issue with this boat!
Follow Tricked Tins on my other social media accounts for giveaways and special offers👇
bit.ly/TRICKEDTINSFACEBOOK
bit.ly/TrickedTinsJonboats
www.TrickedTinsJonboats.com
Follow my Videographer👇
/ ricomarcelophotography
/ ricomarcelophotography
/ _rico_marcelo
Follow SBFISHINGTV👇
bit.ly/sbfishingtv
My brothers company check him out👇
bremmystrong?ig...
bremmyproducts.com/2Y=
bremmyproducts.com/

Пікірлер: 80

@manchurob6432 Жыл бұрын

Video quality is getting a lot better. Nice one! Love how you quickly explain the problem and the fix...and then do it. Excellent editing!

@TRICKEDTINS Жыл бұрын

I do appreciate that. Recording and editing these videos is still a lot of work. I learn something new every video. Thanks for the feedback

@christinerogers5331 Жыл бұрын

To sum this video up, simply PROFESIONAL!!!! AWESOME REPAIR!!!

@TRICKEDTINS Жыл бұрын

Thank you I feel good about it

@maddgoatee9708 Жыл бұрын

Top rate repair. You killed it. If it was my boat I would been very happy with that repair. Great video.

@TRICKEDTINS Жыл бұрын

Thanks brotha!

@VinceFoster Жыл бұрын

Amazing work!

@TRICKEDTINS Жыл бұрын

Thanks brotha!

@traviscrowell476 Жыл бұрын

Matt you the man! Thanks for fixing my boat!!

@TRICKEDTINS Жыл бұрын

Thanks, Brotha! Keep putting those big girls in it!

@FranksDIY Жыл бұрын

Awesome job on that repair

@TRICKEDTINS Жыл бұрын

Thanks brotha

@JohnLewis-gi5vp Жыл бұрын

Great work.

@TRICKEDTINS Жыл бұрын

Thanks brotha!

@DougSloan-xi7kt Жыл бұрын

This just happened to my same exact boat. Only info I have found so far. Thank you

@TRICKEDTINS Жыл бұрын

It's a recurring problem with square nose boats. Usually spawns from incorrect trailer set up. Lmk if i can help.

@rodconner9079 Жыл бұрын

Damn Boy!!! The amount of time ya got in that --- and edited down to 20min ........ and still show the "product"; my hat's off to ya bud!!!! Great work!!!! That constant "pull" against or on the loop really shows where the stress is; it's the flex on the "gauge". You definitely made a difference by "spreading the load". The only additional "strength" builder to add would have been to go up into (through the hull) the cross-rib with a direct attach with the plate allowing the pull to be spreading the width of the boat, then again - that may be overkill! :) Love it my friend!!! Be Safe

@TRICKEDTINS Жыл бұрын

Thanks man. I thought about that originally, but i really dont think its necessary. Thanks for watching brotha!

@jeremycappert8906 Жыл бұрын

You do very nice work, always enjoy your content and videos. Hopefully one day I can swing by your shop

@TRICKEDTINS Жыл бұрын

Thanks, the door is always open!

@chrism4715 Жыл бұрын

You are one hell of a craftsman exelent job

@TRICKEDTINS Жыл бұрын

Thanks brotha!

@budcat2 11 ай бұрын

I think I own that boat now. Not one like it but that boat in your video. I just checked and the patch is there. Installed well enough to look like it was OEM. Thank you for the great job. I will be using it all over Texas.

@TRICKEDTINS 11 ай бұрын

Not surprised. Definitely went to Texas. Thanks for sharing.

@budcat2 11 ай бұрын

I am a disabled Vet. Had my knee replaced and my hip x2, I got this boat to help me in my recovery. The 1652 is super stable and I have no worries as I move about the boat. I have completed a few trips and think I am now ready for an adventure. I will be doing a trip down the Sabine River below Toledo Bend Dam to the Gulf. Camping along the way. That front deck is big enough for a Cowboy bedroll, but there should be plenty of sand bars. Wish me luck. @@TRICKEDTINS

@marklaramie7393 2 ай бұрын

Damn Matt, nice work bro...... 🍻

@greenpighunter6930 Жыл бұрын

Excellent job. My 05 Lowe 1448 has been rode hard alot while wet, been to 6 States and the bow eye looks new.

@TRICKEDTINS Жыл бұрын

Thany you. That's awesome Your trailer must be a perfect fit.

@RA-zl6iw Жыл бұрын

I’m a self taught welder, still learning, not great yet. I’m really struggling to tig weld aluminum and at times I hate it. That was a nice job you did and a lot of work

@TRICKEDTINS Жыл бұрын

Hmu on FB, or IG messenger ill give ya tips. It's nothing to hate brotha. Links in the description.

@timg185 Жыл бұрын

You do awesome work! Your welds are better than the welds on my 2019 $35,000 Ranger . I sold it.

@TRICKEDTINS Жыл бұрын

Thanks. I've had 20 years of practice lol

@victorremick9721 Жыл бұрын

Now that is a really NICE FIX

@TRICKEDTINS Жыл бұрын

Thx brotha!

@Nick-gi6ym Жыл бұрын

Great job

@TRICKEDTINS Жыл бұрын

Thanks brotha

@ericweaver4152 Жыл бұрын

He fixed my southfork SS 18x56 same thing happened. Great work

@TRICKEDTINS Жыл бұрын

Thanks for sharing! That was 8 months ago, but its a perfect example of a brand new boat from a completely different brand with the same issue! Here's the link to that video! kzfaq.info/get/bejne/aM-Uadqg08mWpqM.html

@TRICKEDTINS Жыл бұрын

I really appreciate you sharing brotha! Been a while. How's it holding up? Be honest. Either way, I want the feedback!

@dfry16 Жыл бұрын

Nice work, my Alumacraft 1648 has the same issue maybe not quite that bad. I’d gladly pay 850 to have it fixed like that if I could find someone local I trusted enough to do it. Love the content keep it coming!

@TRICKEDTINS Жыл бұрын

Thanks brotha!

@chicagolandrc8661 Жыл бұрын

What do you think of the welbilt brand. I have a grizzly 1654 tunnel. And looking at getting a weldbilt 1860 tunnel. I think the gauge is thicker on the 56 and 60 welbilts

@TRICKEDTINS Жыл бұрын

Yeah i think so. The Weldbilt hulls are nice, but the interior options they install suck. Watch this video kzfaq.info/get/bejne/mt2RdtWXnNSZkZc.html

@kegger7676 Жыл бұрын

What's you thoughts on an 1860 Jon to start with for a conversion, I am thinking Lowe Roughneck 1860...I am a big dude at around 400lbs. Any other I should be looking out for, looking to buy a new hull in 2023. Keep up the great work, videos are great!

@TRICKEDTINS Жыл бұрын

Roughneck is a good boat. Tracker Grizzlys are similar in price and quality in my opinion.

@wmkess Жыл бұрын

Would this same approach work for a riveted flatbottom Alumacraft? I know the hull material is thinner. I have a 1648 riveted one and it has the eye riveted onto the flat front at the top. Not only is the location bad but it was about 2” off center from the factory brand new lol. Makes it a pain to winch up straight.

@TRICKEDTINS Жыл бұрын

That sounds like a pain in the ass. Idk man. I hate riveted boats, but that's the only way I would know to repair it. Goodluck brotha.

@wmkess Жыл бұрын

@@TRICKEDTINS Appreciate the reply. Love the vids. Keep up the good work.

@RA-zl6iw Жыл бұрын

What type of aluminum do you use for your boat fab work?

@TRICKEDTINS Жыл бұрын

Thickness varies depending on the application, but I use alloy grade 5052. It's bendable and tough enough to last a lifetime!

@fishingistherapy 9 ай бұрын

Getting this issue repaired on my jon boat this weekend. How would you recommend setting up the trailer to prevent this?

@TRICKEDTINS 9 ай бұрын

Boat needs to sit flat on bunks. Also I added a cross board from port to starboard above the winch roller. Seams to help distribute the load.

@fishingistherapy 9 ай бұрын

@TRICKEDTINS Nice. Thanks the valuable insight. Added a Yates etrailer flat bottom jon boat flat stop instead of the bow roller to correct this issue, as I had the same issue you went over and just got mine welded this past Sunday. Thanks.

@Pitchpullin5 Жыл бұрын

Badass work, may I suggest replacing the carpet bunk boards with PVC bunks. I don't have to power load and slam my boat on the trailer.

@TRICKEDTINS Жыл бұрын

Not a bad idea. You have to be careful with those. I've repaired a bunch of boats that have slid off the trailer at the ramp. I dont care what bunks you have. never take the front winch cable off until the trailer is partially in the water. Nobody wants to be that guy 😆

@Pitchpullin5 Жыл бұрын

@@TRICKEDTINS I agree, I was able to push my boat off with one finger. I can easily see how someone could forget and have their boat slide off. I do have to stay in the throttle while loading and walk up front to hook up the eye then walk back and place it in neutral. If not the boat will slide off the trailer. If I could do it over I would have went with the 2x6 boards vs the 2x4's.

@TRICKEDTINS Жыл бұрын

@@Pitchpullin5 thanks for sharing!

@Pitchpullin5 Жыл бұрын

@@TRICKEDTINS I appreciate you reaching with us on your channel brother.

@joshrhodes281 2 ай бұрын

How much to weld pods on 1654 tracker prep work already done just weld

@TRICKEDTINS Ай бұрын

Around $500

@josephdiesing8506 Жыл бұрын

I understand that flat nose is structurally weaker. Do you think that it’s also because all of the additional weight due to the built out jon boat? Or have you seen this issue on completely bare bones flat nose?

@TRICKEDTINS Жыл бұрын

This boat is stock from Backwoods Landing. It happen before any modifications were made to the hull. In my opinion, they need more reinforcement and special trailers. Your boat will be stressed way more on the trailer, than on the water.

@Therapy-n-Session Жыл бұрын

💪🏾💪🏾💪🏾

@riverpirate1022 Жыл бұрын

Amazing work but I hope you or someone painted it after.

@TRICKEDTINS Жыл бұрын

Thanks, brotha! Customer did his own paint job.

@swissarmychainsawadams9541 3 ай бұрын

BOOM!

@TRICKEDTINS 3 ай бұрын

Thanks brotha!

@noobsearn2die342 Жыл бұрын

What Jon boat model is this?

@TRICKEDTINS Жыл бұрын

Weldbilt 1652

@johnwimbs2157 Жыл бұрын

I love it. But why did you hlfass it three times well,,,:at least two times. Then badmouth the other guy before doing a proper job?

@TRICKEDTINS Жыл бұрын

The customer wasn't ready to spend the money and fix it permanently. Besides, my previous welds were excellent. The boat has a bad design. If you weld that bad, you shouldn't be taking on projects like this...

@matthewhoopes4440 Ай бұрын

The price seems extremely fair

@TRICKEDTINS Ай бұрын

Yessir

@esper_flip6891 Жыл бұрын

Crazy how a 12x12”x3/16 plate on the inside of the hull from the factory would have avoided all that work.

@TRICKEDTINS Жыл бұрын

Facts

@MichaelCraig-bi3wj Жыл бұрын

Another bullet proof repair, when you going to start bass fishing man?

@TRICKEDTINS Жыл бұрын

HAHAHA, Today! I fished my first tournament with @SBFISHINGTV today. We placed 2nd! He caught the fish, and I netted them 😆 🤣 😂 I did catch one small one tho. I'm a very competitive person. I can see myself getting into

@MichaelCraig-bi3wj Жыл бұрын

@@TRICKEDTINS Oh man I want to see that!! at least you got a taste of it and with a great guy to.

@TRICKEDTINS Жыл бұрын

Im sure sb will drop a video soon