No video
10.3 Strip and re-cover with Dyneema for high abrasion resistance
Рет қаралды 17,592
Күн бұрын
@mrkultra1655 Ай бұрын
That’s some fine work my friend, WAY beyond my rope work and knotting ability.
@aerialrescuesolutions3277 Жыл бұрын
Excellent video quality, edited very well, and an immaculate working surface. PLease keep making videos. Jim H. Portland, Oregon
@Premiumropes Жыл бұрын
Thank you very much!
@rocketappliantist4969 Жыл бұрын
I kinda miss the music you guys used on your splicing videos from like 9 years ago. Glad to see you guys are still putting out quality content though!
@ferenovacaouniao3014 Жыл бұрын
Congratulations your video coming here in Brazil / São Paulo.
@pollewop_productions Жыл бұрын
Looking forward to this one!
@Premiumropes Жыл бұрын
Hope you like it!
@kggk6358 8 ай бұрын
brilliant!
@GoodOldSlav Жыл бұрын
What's the length of the dyneema cover used in this example? Thanks
@Premiumropes Жыл бұрын
We use 3 meter cover when we want to re-cover 2.5 meter of rope.
@GoodOldSlav Жыл бұрын
@@Premiumropes Thanks! So you strip at the 3rd meter in the example, and the additional cover is 3m as well.
@Premiumropes Жыл бұрын
@@GoodOldSlav take 0.5 meter extra for the cover
@laurentb5401 Жыл бұрын
1. compared to a cover with technora or polyester, is it easier to splice with Dyneema cover. 2. In what application do we use this type of technique? Halyard, Mainsheet with block?
@Premiumropes Жыл бұрын
It's maybe a bit easier with Dyneema, but it won't ne a big difference. The technique is mainly used to add extra abrasion resistance to jibsheets, and all types of halyards
@laurentb5401 Жыл бұрын
@@Premiumropes Thanks for your response. it was indeed easier with the Dyneema cover. I tapered 1.2 meter since it is for a tackline on a small boat. Nevertheless at the end I was not able to tuck back the dyneema tail cover inside the initial cover (Polyester and Technora) the cover was so tied so I was not able to insert a fid. any tips for the next time? I just did a whipping
@Premiumropes Жыл бұрын
@@laurentb5401 I dont know which rope you used, but some are difficult or in some cases impossible to splice proper;y. Ask the brand or supplier if a rope can be spliced.
@jeremiahblatz 11 ай бұрын
@@laurentb5401 that sounds like VPC to me. It's nice & cheap, but an absolute nightmare to splice. Note that Technora doesn't have great UV resistance, so it's good to make sure it's covered.
@almahrus3834 4 ай бұрын
Benang apa
@samsungtv4u 11 ай бұрын
Skills....
@ferdyvigneault4199 Жыл бұрын
P R O M O S M 😇
Friendeez
Рет қаралды 20 МЛН
Emily & Clark's Adventure
Рет қаралды 93 М.