This video has been an enormous help for me with my splicing Thanks 👍
@almahrus383424 күн бұрын
Benang apa
@jennifereutebach6430Ай бұрын
Hi, would this be considered a class two double braid splice?
@PremiumropesАй бұрын
The technique is similar. These splicing classes are specific for Samson
@oytunturkmenАй бұрын
Hello. Great tutorial thanks for it 🙏🏻 Is there any difference between 32 plaited cover or 24 plaited cover and 12 plaited core or 16 plaited core?
@PremiumropesАй бұрын
The technique will be the same. But a 32-plait cover can be more comapct and difficult.
@vincentwelch7286Ай бұрын
Thanx!
@cornelisvanderbent8569Ай бұрын
What thickness?
@chrisingham7684Ай бұрын
Great video! But, it would be SO MUCH easier to see exactly what was happening if the background was dark blue or black. White or light blue on a white background is not optimal…
@travisweaver1805Ай бұрын
so two problems i notice in real world situations, #1 taking the core out of the cover is never ever ever that simple or fast, it always usually ends up a mangled mess and takes about 30 minutes to an hour to actually pull out. # two, pulling the joint into the cover is never ever ever that easy or fast, or sometimes even possible; it's 3 layers too thick to get through the original hole you pulled the core out of, it usually requires about an hour of pounding and/or getting two people to pull it or getting it on a winch to pull. Nice video, but doesn't address real world issues. Obviously you did it here, but for whatever reason it doesn't work in the real world.
@GuidoBicocca2 ай бұрын
Which yarn is used?
@danielrock56692 ай бұрын
I'm not sure everyone is going to be able to easily pull that much slack of the core through. I guess it's fine for short ropes.
@jasonnaubur87592 ай бұрын
Would be nice to have some troubleshooting. I can't pull the end through the hole in the first step. I have the same tools as you do, it just won't go through. 4mm rope from your shop too. Showing a pro do it like it is so easy is misleading.
@Premiumropes2 ай бұрын
Please send us some pictures via email. We off course like to help out
@moonhand83112 ай бұрын
The best knot tying chaps on YT.
@KevenDRayne2 ай бұрын
Can this be used to attach a friction ring into the loop?
@martinaustin30332 ай бұрын
Wonderfullly !!! ...
@martinaustin30332 ай бұрын
It may cause problems in carrying loads.
@PeteClimbsTrees20 күн бұрын
Explain how/why
@lucasharkow67672 ай бұрын
Does this work for marlow’s D2 product?
@vincentlabruzzo53683 ай бұрын
Definitely should taper more. Splice would be smoother
@user-hf1fm7lw2f3 ай бұрын
Does it work to link ropes of different diameter?
@Premiumropes3 ай бұрын
The technique would would, but it probably won't be a loop. This would be another splice kzfaq.info/get/bejne/h5yglNdzzpnFdaM.htmlsi=NM-6egGOEoEtap-s
@user-ik5hb7nv1q3 ай бұрын
How strong would this be relative to the cord / rope you spliced together assumning you did a good job?
@Premiumropes3 ай бұрын
Quite strong. With proper splicing you the breaking strenght won't go down more than 10%
@Zephyr6533 ай бұрын
Where is the core spliced? How is the continuous line strong without the core connected? The cover has no strength?
@Premiumropes3 ай бұрын
The splice is without the core. Only both covers. In this rope the load is equally divided between core and cover. If you like to make a loop with the core, please check this video kzfaq.info/get/bejne/rrdzn6Sn1Mu8f2g.htmlsi=XF11Bk5xcUOJo-5f
@SamuelLanghorn8 күн бұрын
you have to understand what is the purpose of your line? are you maximizing strength or are you optimizing for handling? For a furler control line you clearly need a decent thickness for handling you are far from any load near breaking strength.
@ramonenriquecastellanosval19713 ай бұрын
para. aprender este nudo y otros más gracias seguiré viendolos
@kym3934 ай бұрын
It was painful watching him bumble his way through the first round of tucks. That 3rd tuck was a cracker.. 🤣
@knotsandcues4 ай бұрын
🎩👍🏼
@log-x79764 ай бұрын
Hello. Wich feeder kit are you using?
@seasoldier39024 ай бұрын
What size are your fids?
@madario4 ай бұрын
My halyard is very tight. I just can't introduce the F-20 needle into it to pull the extra cover. What should I do? Thanks!
@Premiumropes4 ай бұрын
It is trickier with used halyards indeed. You can try a thinner needle. It could perhaps be combined with the Soft Fid. www.premiumropes.com/softfid
@marcusstahl87025 ай бұрын
Mein Tipp! Ich habe einen YAK T100 (100 Pfund )Wurfarm auf der Alligator 2 verbaut. Die Sehne ist Dyneema Pro in schwarz ( die farbigen halten angeblich nicht so gut ) Die Sehne ist an der Schiene innenverstärkt. Als Mittenwicklung habe ich einiges ausprobiert, aber nur ein Material hat mich absolut überzeugt! Ich nehme von der Firma Micro Tex eine Dyneema Angelschnur in 0,4mm Stärke und wickle damit die Mitte, aber nur über die Breite der Schiene, plus etwa 3mm rechts und links hinaus! Wichtig ist, zu Anfang die Schnur dreimal mit einer Nadel durch das Geflecht von einer Seite zur anderen durchführen, damit sie sich sicher nicht lösen kann! Danach vorsichtig zuerst ein paar Wicklungen ohne Wickelgerät ausführen, dann mit dem Wickelgerät, das anhängt, bis etwa 2/3 straff wickeln. Beim letzten dritte eine Schlaufe aus dieser Schnur nach außen legen und vorsichtig den Rest wieder von Hand straff über die Schlaufe wickeln. Am Schluss ein gutes Stück stehenlassen, abschneiden und durch die Schlaufe, unter dem letzten 1/3 langsam zurück durchziehen! Dabei empfehle ich eine Zange . Bis jetzt habe ich noch keinerlei Abrieb feststellen können! Meine Sehne liegt wirklich extrem straff auf der Schiene und ich habe schon sehr viel geschossen 👍🏻
@Premiumropes4 ай бұрын
Gute Idee von Dir. Insbesondere bei sehr dünnen Leinen aus Dyneemafasern sind clevere Tricks notwendig. Weiterhin viel Spaß wünscht das Team Premiumropes
@jeffdege47865 ай бұрын
So far, I've only done this a few times, so I won't call myself an expert, but one hint that's helped me... Before you pull the core from the double braid, tie a loop knot into the double braid, six or eight feet from the end. I use an alpine butterfly knot. This will anchor the core to the cover, limiting how far down the compressed section of the cover will extend. When you're milking the cover back over the splice, the knot is how far down you need to stop. And you can slip the knot over something solid, I've used benchdogs on my workbench and I've used door knobs, that you can use to anchor the rope while you try to milk the cover. Grabbing the unlaced strand of the cover, releasing the core entirely, and leaning into the pull with the rope anchored at that knot can get the cover through those tight spots where simply pushing on the cover doesn't work.
@Premiumropes5 ай бұрын
Hi Jeff, that's handy extra suggestion thanks! We do this indeed for every splice before we start.
@paulincumbria5 ай бұрын
At 7:10, the fid goes in to the core on the OPPOSITE side from where the core emerges from the cover. At, say 10:28, you can see that this ensures the eye of the splice will lie nice and flat - no twists. First time I tried this I didn't realise it mattered where the fid went in and wound up with a big twist, making it impossible to get that last centimetre of core into the cover - very frustrating!
@Premiumropes5 ай бұрын
Good you finally managed! Personally I do not like this type of rope very much. We stopped producing it. Intermediate cover is only for savging money. The small uncoated core is the only thing which carries the load (and stretch). Not suitable for laminated sailes. Better to take a coated full core in Stirotex for same amount of cost (S CUP).
@paulincumbria5 ай бұрын
@@Premiumropes I understand your reserve about this type of rope. I only purchased it because it was an end of reel, half price - otherwise I'd've chosen something else.
@mraugur60965 ай бұрын
Tried with 3mm and couldn’t get the last 4cm of core back inside the cover. It just tightens up and won’t go in, following every step to a tee.. disappointing. Anyone know what I can do?
@mraugur60965 ай бұрын
Does it need to be a certain type of braided cover that has certain stretch properties?
@Premiumropes5 ай бұрын
Hi, thin ropes like the 3mm are more difficult. It also depends on the braiding (so manufacturer). Some thinner ropes are not ment for splicing. You can also splice it without cover, see kzfaq.info/get/bejne/Z6mmn8V0m9HUgXk.html . It is just as strong, since core only takes the load for ropes with superfibre in the core. Or you can retry and taper evrything a bit more and stretch things out before you mill the cover back. Followed by: milk, hammer splice, milk hammer splice and use a winch for puling the last 2 cm. This normally works! Our 3mm S Cup can be spliced with cover for sure. Good luck!
@seadeebee29195 ай бұрын
Not one of the hundreds of videos about these splices actually explains HOW to pass the core and fid effectively through the rope. It is absolutely near impossible I have tried so many times.
@Premiumropes5 ай бұрын
Hi Colin, I understand your fustration. In case ropes are too tightly braided by the manufacturer splicing is not possible or requires special tools like a softfid (www.premiumropes.com/softfid) for pasing the core beyond the other core. You should start with a rope which is not too tight. In case you are interested, we give online courses on splicing. In 2 sessions you learn this splice and also seral others. You will for sure be succesfull in making this splice. Prior to the course you receive the practice ropes from us and from home join the live webinar, see: www.premiumropes.com/online-workshop-splicing-modern-ropes
@seadeebee29195 ай бұрын
Almost impossible to pass the fid through
@kggk63585 ай бұрын
brilliant!
@joelfine53615 ай бұрын
I know this is an older video but do you know where I can get the fid you used to insert into the wire? I am having a hard time finding one.
@the_royal_drop_short.6 ай бұрын
That music drives you mad.
@stevenshaw99406 ай бұрын
Winch seems to be the easiest method to me, saves the body over time I bet.
@toddsmith42807 ай бұрын
Does it work for boat holes in the hull during an emergency?
@fakiirification5 ай бұрын
what?
@forrestallison18797 ай бұрын
Is this strong? You dont need to like splice the cores together strand by strand or something?
@danielrock56692 ай бұрын
I certainly wouldn't trust this to use to pull anything. The only strength in the rope now is the outer jacket.
@samsungtvmail8 ай бұрын
Skills....
@alex-craft8 ай бұрын
Awesome!
@indianatreedinicolarossi28978 ай бұрын
Thanks for the video. My question is, how much breaking strength do we lost with this splicing method ?
@PremiumropesАй бұрын
If you do a good splice, it will remain above 90%
@jackal69028 ай бұрын
‘Twang’… that’s not going anywhere.
@AwakeInAnacortes8 ай бұрын
Please make this video available to save to a playlist. Seems like an oversight to disable this feature.
@rocketappliantist49698 ай бұрын
I kinda miss the music you guys used on your splicing videos from like 9 years ago. Glad to see you guys are still putting out quality content though!
@rocketappliantist49698 ай бұрын
How strong are these loops? Will this be stronger than putting a brummel splice on each end and a girth hitch on each end, or should I use one of these through the block and a girth hitch on just one end?
@Premiumropes8 ай бұрын
You can find the breaking strenghts on our website. The loops are stronger especially for a short distance. www.premiumropes.com/dyneema-loop
@williamc49688 ай бұрын
These splices are a pain, thank you for not making it upside down with screwed up music, like the previous video
@marcderveeuw9 ай бұрын
Yeah.... Looks very easy but in reality bloody hard process. The core never comes out that easy. I've tried this for an in mast mainsail of Selden and it would snap basically the two ends would Separate from each other.I have tried with Dyneema lines and It takes me hours. Some useful points..... Use needles to prevent the core sliding back when you're milking or aligning the lines. If you want to make the loose end easily slide in the other end I suggest to cut at least half of the remaining strands. On many of my attempts the D splice just got stuck inside. I secure with many stitches . Having said this I agree with the principle of this video In reality not such an easy process