10 Bike Tools that aren't screwdrivers

Рет қаралды 1,873,502

Күн бұрын

There are wrenches, pliers, cutters, and all the tools that every home bicycle mechanic has; Today, we'll be talking about the weirder stuff.
Free yourself from the algorithm and join us on Substack! 🚲 bermpeak.substack.com
Videos 2 weeks early • Exclusive articles • Discussions • You’re in control!
The Berm Peak Ranger Station on Airbnb 🏡 www.airbnb.com/rooms/50301108...
chain wear gauge bit.ly/32KyfSP
chain scrubber bit.ly/3tUMz7i
dummy hub bit.ly/2QTdFx8
dummy pedal bit.ly/3tTtthR
spoke tension gauge bit.ly/3gDoxd1
truing fork bit.ly/32KMcAh
headset cup remover bit.ly/32YFAP3
wheel holder bit.ly/3sPwCy3
internal routing tool bit.ly/2QZcYC8
cable puller bit.ly/3evMS1Q
Tire Knob Cutter amzn.to/3aFGunw
Berm Peak Jerseys cognativemtb.com/collections/...
Want us to review your unique mountain bike or outdoor product? www.sethsbikehacks.com/produc...
Check out our main channel / sethsbikehacks
Follow me on Instagram / sethsbikehacks
Music in this video is from
share.epidemicsound.com/trQSg
#mountainbiking
Advertising disclosure: All of these videos contain products, logos, or mentions associated with Diamondback Bicycles. Whether or not the video itself was sponsored by Diamondback, they do support this channel, and by extension, every video on it.

Пікірлер: 1 700

@DeadsetYT 3 жыл бұрын

The only bike tool you need.....a friend who owns all the tools.

@reubenpatterson6746 3 жыл бұрын

@@stockstrut no we can’t help you

@Foster_-gx8sm 3 жыл бұрын

I am that friend😂

@johnsonjay60 3 жыл бұрын

Yep and thats me lol smh

@aerojune 3 жыл бұрын

It good to be Seth's as a friend hahahaha

@fynster0634 3 жыл бұрын

Then whos the real tool your freind or you

@parktool 3 жыл бұрын

CM originally stood for ChainMate when we introduced the CM-1 in 1986, but Chain Massager has a nice ring to it 🤔

@Paios 3 жыл бұрын

why didnt you tell him its a 4th hand tool, not a 3rd hand tool? also gimme a job, i love u.

@parktool 3 жыл бұрын

@@Paios That's true! Our cable stretcher is known as the "fourth hand" as we had already introduced a "third hand" brake tool. The third hand was a device that held brake calipers together to make it easier to install the cable. Similar end result, different approach.

@xd_W1lliam 3 жыл бұрын

Hi park tool what’s a good starter bike

@xd_W1lliam 3 жыл бұрын

@Sour_face_angus like on the streets and dirt built trails

@anguswilson6265 3 жыл бұрын

@@xd_W1lliam hard tail or dj

@gpzjeffrey7974 3 жыл бұрын

The knobby knife was really intended for motocross knobbies that get worn down rounded really fast on rocks, and square knobbies give much more traction in mud and sand. It can extend the useful life of the tire. It's not that motorcycle tires are more expensive, they're just much much harder to change.

@kevincamps2480 3 жыл бұрын

I was just about to make the same comment, I saw it and figured that would actually be really nice for motocross tires which have much bigger knobs than Mtb

@teodelfuego 3 жыл бұрын

Used to square up the knobs on my dirt bike using a hacksaw blade

@marklel 2 жыл бұрын

Oh for sure. Have you ever tried to change a rear pit bike tire? Man, it’s hard.

@ElliotFlowers 2 жыл бұрын

I use one one of these bad boys to cauterise my haemorrhoids.

@sethk1698 2 жыл бұрын

@@ElliotFlowers HA!

@shelbertoswaggapants873 3 жыл бұрын

"If you use your screwdriver as a pry bar, you won't have a chisel when you need one..."

@donnietress4737 3 жыл бұрын

My chisel is a pry bar.

@dallasdandigitalproduction393 2 жыл бұрын

Lol

@christenrten 3 жыл бұрын

Park Tools: no one will ever watch a 10 minute bike tool commercial.. Seth: hold my beer

@SkilledMTB 3 жыл бұрын

You should change this comment to Seth: hold my knobby knife

@JoaoPauloSoares61 3 жыл бұрын

Hold my baby*

@chrislukes9037 3 жыл бұрын

Park Tool actually _does_ make tons of videos that are essentially detailed "tool commercials," along with some more general educational and entertaining content.

@michellesharpe6159 3 жыл бұрын

Hold my LaCroix...

@sepg5084 3 жыл бұрын

@@chrislukes9037 true. I use those vids to know how to use my tools to fix my bike

@ethanchristensen2364 3 жыл бұрын

someone once told me that you could “borrow” your neighbors hose to use as a dummy hub

@BermPeakExpress 3 жыл бұрын

Now that’s a great throwback

@stockstrut 3 жыл бұрын

@@BermPeakExpress yes

@ethanchristensen2364 3 жыл бұрын

@Berm Peak Express forever a fan 😂 keep up the great work ❤️

@FreestyleSkier 3 жыл бұрын

*obtain

@blaze_dkp135 3 жыл бұрын

@@BermPeakExpress 😂

@zcool120 3 жыл бұрын

I've got a couple things to add as a bike mechanic -there is an attachment you can get for your truing stand to true disk brake rotors, it can either be an arm that you can adjust in tiny increments and hear when it's rubbing, or it can be a gauge that has very fine measurements that are felt by a spring-loaded piston. -Another thing that can work for pulling cables through a frame is a vacuum and either dental floss or fishing line. Feed it into one end and use the vacuum to pull it through the other hole, then similarly tape it to the cable.

@Coastal_Cruzer 6 ай бұрын

Save yourself money and just use an old brake caliper on your bike as a truing gauge. That way however you tune or tweak it, that's how it will be on your bike.

@shipoffools2183 2 жыл бұрын

I’m getting into bikes again after a long spell and finding more change has happened in the last 15 years than when chains were first added! Really enjoying your content and presentation , thanks for sharing.

@spoon7177 3 жыл бұрын

The tyre knob cutter is mainly used for dirt bikes, the knobs are alot bigger so tyres last alot longer but the knobs round off pretty quickly so it helps to keep them feeling new.

@dystopiaisutopia 3 жыл бұрын

A lot

@reboundrides8132 3 жыл бұрын

That makes way more sense

@georgealexanderp 3 жыл бұрын

I was thinking about my dirtbike while he was using that...

@lukeward2309 3 жыл бұрын

That explains the wide blade

@OMazoo22 3 жыл бұрын

Yeah I’ve got one for the dirt bike, I think it’s called the Tread Doctor

@willshawyer7280 3 жыл бұрын

This guy really knows how to make the most uninteresting ideas into the most interesting videos

@NorroTaku 3 жыл бұрын

wdym it's Hella interesting I love specialized tools

@jetta.65 3 жыл бұрын

@@NorroTaku not for everyone, like me i kinda dont care for the specialized stuff but i still watched this video lol

@user-cm5jc2sp4s 3 жыл бұрын

You right dude

@holdenellis1395 3 жыл бұрын

I don't think this video is the best example but you are right

@Idelee 3 жыл бұрын

I don't even ride, but Seth's video are always very interesting to me. I know a pretty good amount about a sport I don't part take in because of Seth. He makes great videos.

@profesam8457 3 жыл бұрын

I like it! Do another one. You are showing how technical bike repair can be but also how manageable it can be if you have the right tool for the job. Kind gives respect for the mechanics at our LBS and explains why they deserve a real wage for their efforts.

@travisd2895 3 жыл бұрын

You are 100% right. I dont bike but I enjoy your channel. You make fun and informative videos and I appreciate them because it gives me something to watch. Thanks!

@Gamerbro53 3 жыл бұрын

I just wanna state that the tire knob cutter thing, was originally designed for Dirt Bikes since the knobs wear out quickly and make a drastic difference which can often save you from injury.

@bebright15000 3 жыл бұрын

Flat track riders never use stock tires, they cut their tires all the time.

@callum723 3 жыл бұрын

Video idea for Seth, Seth goes through tools he uses in his workshop and tries to recreate them/make them his self. Idk I just think it would be interesting to see his general DIY skills

@georgealexanderp 3 жыл бұрын

This is a GENIUS IDEA!

@rcranes2227 3 жыл бұрын

GCN did something like that with a chain whip. On their show, hack or bridge section is replete with dummy hub hacks, which always get ruled a bodge. If you like Seth's channel, you'll like GCN. Yes, it's for roadies, but they're fun.

@donnietress4737 3 жыл бұрын

I would watch that or alternate tools. How to remove parts with out the proper tools.

@ayy_itsme1626 3 жыл бұрын

@@donnietress4737 alternative tools is a good idea. I never have the right tool when I need it

@paodepota8373 3 жыл бұрын

@@rcranes2227 true. I really enjoy their content as well. Really fun seeing them compare TT bikes vs. Regular road bikes and other stuff

@dallasdandigitalproduction393 2 жыл бұрын

What a perfectly timed video. Im helping open a new bike store in Dallas, and we just got a bunch of these Park tools . Thanks for explaining/demonstrating these Seth!👍

@jimicope4988 3 жыл бұрын

Love these videos Seth, New MTB rider here and I've learned so much from you, thanks for everything.

@seamlcaraculieus4583 3 жыл бұрын

There are an incredible amount of bike tools, especially from Park Tool. While it would take a lot of work to make, it would be cool if you could review all of your maintenance tools, or at least the ones you use most often so that people new to mountain biking can take care of their bikes and enjoy them for longer.

@northbayoutdoors1408 3 жыл бұрын

A lot of home bike mechanics have a fair amount of tools, but that type of video may also be able to help them if they want to complete their collection but they don't quite know what they're missing.

@sebastianjost 3 жыл бұрын

He has done a video covering all the essential tools before. That's still very good and pretty complete

@RealJawnes 3 жыл бұрын

@@northbayoutdoors1408 but Seth does own a fair amount of tools...

@MTBradley 3 жыл бұрын

That's a great idea! There are so many different tools out there for bike maintenance. It's easy to wonder which ones you need and which ones, like bottom bracket tools, fit your bottom bracket.

@ZackSavir 3 жыл бұрын

Yay!! A tools review!! Also I was annoyed when the dummy hub didn’t make a satisfying buzzing noise.......I guess it’s silent..

@stockstrut 3 жыл бұрын

𝑴𝒚 𝒇𝒓𝒊𝒆𝒏𝒅𝒔 𝒅𝒐𝒏'𝒕 𝒕𝒉𝒊𝒏𝒌 𝒊 𝒘𝒊𝒍𝒍 𝒓𝒆𝒂𝒄𝒉 7.45𝒌 𝒃𝒆𝒇𝒐𝒓𝒆 𝒕𝒉𝒆 𝒏𝒆𝒙𝒕 𝒅𝒂𝒚, 𝒊 𝒌𝒏𝒐𝒘 𝒚'𝒂𝒍𝒍 𝒄𝒂𝒏 𝒉𝒆𝒍𝒑 𝒎𝒆 𝒑𝒓𝒐𝒗𝒆 𝒕𝒉𝒆𝒎 𝒘𝒓𝒐𝒏𝒈!!!

@dystopiaisutopia 3 жыл бұрын

@@stockstrut reported for spam

@digby5786 3 жыл бұрын

@@dystopiaisutopia I’ve reported twice already on this videos comments. Now 3 times. I hate people like this

@digby5786 3 жыл бұрын

@@dystopiaisutopia now 6 times!

@brycewhalen8521 3 жыл бұрын

@@digby5786 six! Rookie numbers, I'm at nine! I hate that kind of human with a burning fire

@daanprins6730 2 жыл бұрын

The dummy has been such a help for keeping my drivetrain clean. Also invested in a Parktool stand. It wasn't the cheapest stand ever but its so easy to use, and fold away. Also it's built very well. Love the thing .

@dav1d629 3 жыл бұрын

I love these type of tool reviews! Great job Seth 👌

@i_love_diffin9061 3 жыл бұрын

Seths a hard working man. He works all day in his bike shop then builds tracks and makes KZfaq vids then edits them all while looking after Oscar and dealing with covid19

@digby5786 3 жыл бұрын

And he’s just had a kid. Mans a machine!

@bullfrogboss8008 3 жыл бұрын

What do you mean, Seth is currently dealing with covid infection?

@digby5786 3 жыл бұрын

@@bullfrogboss8008 think he meant dealing with the restrictions and stuff

@supermagikman9952 3 жыл бұрын

@@digby5786 he’s not a kid he’s like 35 lol

@rizqirizaldo 3 жыл бұрын

And he basically have to come with different ideas to make his content fresh so he has to do a lot of different stuffs, but kinda the same

@fernandolouro6111 3 жыл бұрын

Seth: says unique bike tools Me: thinks of the park tool bottle opener🤣🤣

@JipiQc 3 жыл бұрын

The pizza knife is nice too

@fernandolouro6111 3 жыл бұрын

@@JipiQc indeed😂

@joshuahunt8871 3 жыл бұрын

Don't forget seth's taco holder

@brycewhalen8521 3 жыл бұрын

@@joshuahunt8871 damn bro, I was gonna say that. My mind went to the carbohydrates in cheese

@PedallingwithPaul 3 жыл бұрын

Park tool Pizza cutter

@clank1830 3 жыл бұрын

That moment when you upload is something else man

@jimm244 Жыл бұрын

A chain scrubber is a must. Clean drivetrain = happy drivetrain = more fun on the ride. I own the rotor truing tool. It was a worthwhile purchase. I have the chain wear tool, but you’re right; if you’re questioning your chain, maybe it’s time to replace it anyway. I’m going to look into that third hand tool. It looks helpful.

@digbyvincent2396 3 жыл бұрын

Love top ten bike reviews never clicked faster

@stockstrut 3 жыл бұрын

@lukerisser9163 3 жыл бұрын

Just got back from a Sunday morning solo ride and was greeted to this as soon as I got back! I’m always excited for your Sunday uploads.

@octaviangusgus 3 жыл бұрын

The third hand tool actually has a much more practical application. When you replace housing, it can be hard to get new ferrules seated all the way. Customer picks up their bike, shifts it, ferrules settle on there more, and now the bike shifts like garbage and the customer is unhappy. This is what a lot of mechanics call "cable stretch" because it makes it sound like it isn't their fault. The third hand let's you put tension on the housing to seat those ferrules completely so you know it is going to keep shifting well when it gets picked up and ridden. I use it on every new bike I build and every time I replace housing or ferrules.

@chalocolina3554 2 жыл бұрын

It's not a third hand; it's a fourth hand. A third hand is a different tool

@massimpactstrategy5012 3 жыл бұрын

Freewheel removal tools and brake frame refacing tool.. weird bike tools. Like the video! Cheers from Smyrna Bicycles Head Mechanic.

@littlewill4446 3 жыл бұрын

We need a shirt that says “today we will be doing something different, but kinda the same.”

@pitiedmold3581 3 жыл бұрын

Already has similair shirts...

@isaacengeling7001 3 жыл бұрын

There is one kinda. Just check cognitive.

@littlewill4446 3 жыл бұрын

Sry didn’t know there was one 😅

@littlewill4446 3 жыл бұрын

@@Angie-dh5gr I’ve said it a few times I’ve also seen other comments asking for it

@Ryan-sw3km 3 жыл бұрын

@@stockstrut nah nobody likes a self promoting kid tbh

@doggames10 3 жыл бұрын

Can we all agree that Seth is one of those KZfaqrs that you can watch again again and again and dont get bored becose his content is gold

@einundsiebenziger5488 3 жыл бұрын

... because* ...

@BigWarningSign 3 жыл бұрын

The third hand is amazing for getting zip ties really really tight.

@rcranes2227 3 жыл бұрын

Yes! Great point!

@sebastianjost 2 жыл бұрын

Great idea! I never thought of that but it does seem quite convenient.

@chalocolina3554 2 жыл бұрын

It's not a third hand; it's a fourth hand. A third hand tool does a different job.

@joeshmoe7967 2 жыл бұрын

@@chalocolina3554 It will be a 3rd hand to me, as I don't have the other tool. Literally amazoning one right now. Never knew it existed and I am always fiddling getting the brake cables the way I want them. - Cheers

@joshporter5459 Жыл бұрын

There is a tool that pulls tie wraps really tight and then cuts them off flush. I use them at work as an industrial electrician. They are really nice, but a good one is really expensive, upwards of $450 for a 1 trick pony.

@margaretgorelick6903 3 жыл бұрын

Seth you have helped me get into mtb and I am loving it thanks for the tips and tricks

@alexisrodriguez6526 3 жыл бұрын

9:22 me: *-looks at seth fixing tire knobs-* Your knobs get rounded? Since when? Mine just disappear!

@Hazeder422 3 жыл бұрын

It was designed for dirt bikes because rocks round off the knobs more which are needed for corners

@alexisrodriguez6526 3 жыл бұрын

@@Hazeder422 ah yeah, that makes sense, cause my tires end up smooth instead of getting rounded knobs

@alexisrodriguez6526 2 жыл бұрын

@@Its_Captain_Jack_Sparrow noice, tho the street will become a slip n slide during rainy days

@likeaboss882 3 жыл бұрын

The hot knife or tire-knob cutter you showed us isn’t too uncommon in the 4wd community, in one shape or another. It’s pretty cool. I’d definitely consider it for shaping knobs on a work out tire that i could use in mud or something

@michaelfabian2401 3 жыл бұрын

I'm a total Tool-Head kinda rider, one time use super specific or weird tools, yup love and want them all lol. I like to tinker and try my best to do all my own work, repairs, and upgrades soOo... I'm all for the mtb tool videos! Come on Seth the Tool-Man series 🤘

@robbie1212 3 жыл бұрын

That chain cleaning tool works VERY well. I love it.

@ryanford5387 3 жыл бұрын

I got a third hand as a Christmas present and it is probably the tool I'm most grateful to have. I have no idea how I lived without it

@MTBradley 3 жыл бұрын

It's a great tool. I need to get my hands on one.

@mikekrasovec6390 3 жыл бұрын

I primarily use my third hand/cable pliers for zip ties.

@MTBradley 3 жыл бұрын

@@mikekrasovec6390 Oh yeah, that would work nicely.

@chalocolina3554 2 жыл бұрын

It's not a third hand tool. A third hand is for holding the brakes closed. The thing that pulls cable is a fourth hand.

@MrFfiffiffiffi 3 жыл бұрын

I work at a bikeshop and we have only high-end bikes (Santa Cruz and specialized mostly) the pedal dummy is the best thing I have seen in a long time. I need this, thank you Seth 👌🏻👌🏻

@jokermtb 2 жыл бұрын

The Park DT-2 rotor truing tool is one of my favorite tools - it's surprising how many times I reach for it to get my rotors 'just right' spoke wrenches also can remove presta valve cores too, wd-40 in the chain cleaner works great for getting a dirty chain clean Tire knob cutter - mostly for dirt bikes and flat track race bikes....far fewer knobs than a mtb tire!!!

@dahvyee 3 жыл бұрын

I am one of those eavesdroppers from outside the MTB community. I havent ridden a bike in literal years, I loved it and everything about it, I just never got another one after someone stole mine like 10 years ago lolol. MTB is dope though and I love watching yours and SingleTrackSamp

@thomasfitzsimmons2267 3 жыл бұрын

Yep I'm a proud eavesdropper. This stuff is fun to watch.

@c4_114 3 жыл бұрын

WOOOOOO THE KING HAS POSTEDDD

@newtonsantos_photo963 3 жыл бұрын

I have at least half of those weird tools and they are quite useful. Nice video and I am sure that will help a lot of people. Thank you, Seth 🤙 See ya

@MTBradley 3 жыл бұрын

Seth, the story teller. You have nailed captivating audiences!

@wrenchdoozer 3 жыл бұрын

1:46 - I have an old Park Tool CM-3 and it is called the "Chain Mate"

@jaelpikner9872 3 жыл бұрын

A bigger version of the knobby knife is actually used on offroad motorcycle tires to improve grip on them, since they dont have that many knobs it wont take as much time.

@kaidanwheeler1558 3 жыл бұрын

I haven’t went mountain biking a single time in my life but I enjoy watching your videos and I’ve been subbed for a couple years now

@mymotorbikeobsessions 3 жыл бұрын

I was one of those people that liked to eavesdrop on your activities through your videos. Now I’ve turned my Huffy beach cruiser into a bike for the local bmx dirt jump course and do my best impression of trials at the park while my kids play.

@joshhambrickmusic 3 жыл бұрын

Even when we is sick with allergies, he still gives it all to make a video for us. People should respect you tubers like Seth more for working so hard!!!

@HansDieter1997 3 жыл бұрын

The Tire Knob Cutter would be more useful on a offroad motorcycle, much larger knobs that get round way faster

@enriquejauregui5923 3 жыл бұрын

yes we need other vid like this , they are so fun and interesting to watch

@justincorneau594 3 жыл бұрын

I recently got the cm5.2 and it work beautifully

@kylelittle2024 3 жыл бұрын

You look tired Seth! Like maybe you have a baby or something 😂 I’m a new dad too and know the struggle. Can’t wait to teach my little girl how to ride a bike!

@brycewhalen8521 3 жыл бұрын

What about over volting her power wheels? and congrats to you

@jong6292 3 жыл бұрын

You should teach how to fix a bike first🤣🤣

@jasonk1540 3 жыл бұрын

I'm curious as to how the knobby knife would have handled those hairs on that tire a couple videos ago.

@xzx4696 3 жыл бұрын

Thank you for showing me a tool that will help me with removing head caps I have been looking all over the place

@nickojohnodtujan2795 3 жыл бұрын

My fave tool among those is the chain cleaner. Very useful indeed.

@jayesh5131 3 жыл бұрын

I was thinking about Seth and here comes the video 😊

@strix8534 3 жыл бұрын

same

@stockstrut 3 жыл бұрын

@garthsjaunt4373 3 жыл бұрын

The WH-1 is the most useful, underrated tool that Park makes. Literally all tasks involving a wheel are improved by using it. It boggles my mind when I walk into bike shops and see mechanics trying to set up tubeless or change a rotor with the wheel on the ground.

@MTBradley 3 жыл бұрын

I agree. I don't have one, but it's on my wish list now!

@RoxioCZE 3 жыл бұрын

this is actually very informative, thank you

@veit4025 3 жыл бұрын

Seeing another videi about this stuff would be awesome. Not that id buy anything but these kinds of old Seth bike hacks are just entertaining. And we all know that we would literally watch you doing the laundry.

@holdenbostocky1998 3 жыл бұрын

That tread cutting tool is really designed for dirt bike tires, I’ve seen people use it but it’s more or less the same thing you had to say about it.

@elliottframe236 2 жыл бұрын

tbh tho u can just flip the tire around and know you have another sharp edge on all the tiers so don't really know if the knobby knife or other similar products are worth it , especially considering you could just replace the tier for £20

@SP-yb4fm 3 жыл бұрын

You know it’s gonna be a good day when you click your subscriptions and see a berm peak video

@michaelcranmer2796 3 жыл бұрын

I’m new to the sport and love learning from ya.

@procheetah9123 3 жыл бұрын

You made my day seth thank you for helping me to feel better

@JaredRMorgan 3 жыл бұрын

Wooo! Best part of Sunday!

@stockstrut 3 жыл бұрын

@gritmtb6876 3 жыл бұрын

Alternative title: Ten bike tools you’ve probably never heard of

@JoaoPauloSoares61 3 жыл бұрын

And you never needed but fuckin bike industry will chug it down your throat for a million bucks

@bullfrogboss8008 3 жыл бұрын

Chain checker is a pretty popular and mundane tool

@JoaoPauloSoares61 3 жыл бұрын

@@bullfrogboss8008 if you're that type of mountain biker....

@mikekrasovec6390 3 жыл бұрын

You left out a number of incredibly helpful tools such as a tube expander, spoke cutter (phil wood being my favorite), spoke punch, ultrasonic parts cleaner (far superior to the chain cleaner with the brushes), vernier calipers, impact screwdriver, riv-nut kit and seat tube reamer. Yes tube expanders are a real tool.

@slappdaddy8 3 жыл бұрын

Your info is alway extremely solid and interesting!

@cedarbremner8750 3 жыл бұрын

Well tomorrow is my dad's birthday and I didn't know what to get him... Then all of a sudden: Hallelujah! A Seth products video!

@NaniJapaneseForWhat 3 жыл бұрын

what did you get him?

@martymcfly8314 3 жыл бұрын

Get him another brand of the same product. Don’t waste your money on the blue money pit brand.

@louiefriesen 2 жыл бұрын

I can just imagine people using the knob knife on Nobby Nics, then turn them into Nobless Nics.

@leonardhpls6 Жыл бұрын

Nobless Nick was my name in school

@aaronmosser 3 жыл бұрын

Thanks. I had no idea on a few of these tools. As often as I work on my own bikes I don't think many worth the money. Wish I had more time to work on my bikes and ride more often. Keep up the great vids

@doubleohdad8548 3 жыл бұрын

I'm down for another one, love these videos 👍

@RTBR_BTTL 3 жыл бұрын

“They make dummy hubs” Me flashes back to when he used a hose as a dummy hub.

@samb2334 3 жыл бұрын

I can’t even think of a part that requires a screwdriver now, it’s all Allen keys

@smallhatshatethetruth7933 3 жыл бұрын

@@bruceciers2247 and even then they are bloody JIS and not Phillips

@smallhatshatethetruth7933 3 жыл бұрын

@@bruceciers2247 you get cam out if you use a phillips head screwdriver on them

@jacobeldredge821 3 жыл бұрын

love your vids keep up the good work. I want to see a part 2

@linusrosen6292 2 жыл бұрын

I don't have any background in mountainbiking at all and yet I've watched Seth since the days before Berm Peak! He makes it so fun!

@mopedvieh 3 жыл бұрын

The knob knife is actually quite often used by pro mechanics. They cut down the middle knobs of heavy mud tyres in order to decrease rolling resistance (and therefore increase speed) without sacrificing cornering grip.

@silascatalano9491 3 жыл бұрын

can we have a series of just Oscar playing 🐶

@MTBradley 3 жыл бұрын

That would be pretty rad! Let's see it Seth!

@ndegraafndg Жыл бұрын

Used to use the tire knobby knife on dirtbikes sometimes, come in handy when you didn't really want to put a brand new tire on for a certain race but needed a bit better traction, or we v'd the knobbies for mud race when I only had a hard pack tire, surprisingly worked well in that situation.

@TheHmheldinho Жыл бұрын

Wh-1 is the best tool you can have!! At our workshop we have for!! One for each mechanic!! We use them all the time! Tubeless, tubes!! Kassete, and and and!! Amazing tool!!

@manboyex1621 3 жыл бұрын

You’ve developed the new child cave man look. Lol. Congrats on the new addition to your family.

@blakersen 3 жыл бұрын

Well, looks like Seth has just stepped up his rc crawler game with a tire cutting tool. 😂

@BigWheel. 3 жыл бұрын

Never had a major internet in biking, really like Cars more personally, but this video was put together very well, interesting how these machines are maintained.

@panzerveps 3 жыл бұрын

When I'm doing internal cables, I use an old brake or gear wire and a magnet to guide the outer cable through the frame. Works like a charm, and it's way cheaper than the Park Tool one.

@williamflynn4408 3 жыл бұрын

Seth I would like to see some more rc crawling with Curtis.

@crisdiaz32107 3 жыл бұрын

I use a dremel to freshen up the tires takes like 10 minutes each tire and the results are amazing

@kbgaming6012 3 жыл бұрын

The last tool is insanely handy for dirt bikes motorbike since a decent replacement tyres are around $180

@TheDarkfighter101 3 жыл бұрын

Hey Seth. I just wanted to say I just got my first bike. Thanks for the channel I have been watching for a long time and appreciate your content it has really inspired me to get out and ride.

@nghtmre4871 3 жыл бұрын

Never been this early before damn

@Siah980 3 жыл бұрын

Seth today is my birthday 🔥🔥🔥😎💯🐐

@vornamenachnahme1220 3 жыл бұрын

Thank you very much Seth, for a moment I forgot that I'm in the hospital because I had an bike incident. It's really nice watching bike related videos although I can't ride right now. I'm soooo stoked to ride again 🤩😀🚲👌

@musk8695 2 жыл бұрын

Man, Seth is one of the first youtubes I've watched. I remember watching him way back when he lived in Florida.

@balogbalazs2828 3 жыл бұрын

Lol I've never clicked as fast as now

@koerni0653 3 жыл бұрын

First hahaha, almost broke my finger clicking so fast

@dystopiaisutopia 3 жыл бұрын

Need more calcium.

@jamesdeer1591 3 жыл бұрын

Hey Seth. The knobby knife is very popular with dirt biking. Really makes a huge difference one big knobs

@HarleyJones101291 3 жыл бұрын

I have owned the crank brothers multitool for about a year now, and only until now did I know it has a spoke wrench. Seth... thank you brother amen 🙏

@unogazzy84 3 жыл бұрын

I have had a couple "chain massagers" and they all broke. I got fed up and do what I always do when I get tired of stuff breaking; I bought an, over the top, kind of chain cleaner. The Park Tool CM-25. It's awesome according to me.