10 HVAC Tools Under 30 Bucks That Are Worth Having

Рет қаралды 102,777

Күн бұрын

Top 10 HVAC tools under 30 dollars that are worth having! These are 10 tools that I picked out of my tool bag that I really like and they are all under 30 bucks! Let me know which one you like the most! Or if there are any great tools that I missed, please let us know in the comments below! Here are the links to the tools mentioned in the video:
Magnetic Stainless Steel Tray:
amzn.to/2qT7Sed
Cliplight Camouflage Flashlight:
amzn.to/2Dlt5jD
Stainless Steel Magntic Tray:
amzn.to/2Dk5a3X
Makita 6" Magnetic Nut Driver Set:
amzn.to/37EvRhD
Dewalt Magnetic Nut Driver Set:
amzn.to/37HUv0P
3 Amp Thermal Circuit Breaker:
amzn.to/2XRb06d
3 Amp Push Button Breaker:
amzn.to/2OkWZuC
Generic Angled Adapter:
amzn.to/2OSMduO
Right Angled Adapter Small:
amzn.to/34rez5C
Dewalt Right Angle Adapter:
amzn.to/2Dicld9
Flexible Bit Holder Set:
amzn.to/2OLDf2m
Dewalt Flexible 90 Degree Adapter:
amzn.to/35EHtiO
Mini Alligator Jumpers:
amzn.to/2QQj4Tv
Magnetic Jumpers:
https: //amzn.to/35DRNI5
Milwaukee 12" Bit Extension:
amzn.to/37CdKct
Telescoping Magnetic Grabber:
amzn.to/2KYlN9L
Dentist Scraper Tool:
amzn.to/35zJJIg
Milwaukee Drill Hex Screwdriver Kit:
amzn.to/2KZwQQ2
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
For More Repair Videos:
🔌 Dryer Repair Playlist:
• Dryer Playlist
🧺 Washer Repair Playlist:
• Washer Playlist
🔥 Furnace Repair Playlist:
• Furnace Playlist
❄️ AC Repair Playlist:
• Air Conditioner Playlist
💧 Water Heater Playlist:
• Water Heater Playlist
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
🛒 For a Complete List of Tools and Parts Visit my Amazon Page:
amzn.to/2Q3QTOA
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
🅿️ If you want to support the channel:
paypal.me/WordofAdviceTV
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
🙋🏻‍♂️ Word of Advice TV Social Media:
Facebook ► / wordofadvicetv
Instagram ► / wordofadvicetv
Twitter ► / wordofadvicetv
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
📷 Interested in What Gear I use to Film my Videos?
Sony A6300 16-50mm:
amzn.to/2OmLSPF
Sony 35mm Fixed Lense:
amzn.to/2LPAU3A
Extra Batteries:
amzn.to/3c8QBj1
Memory Card (2):
amzn.to/34rcwQ1
60" Tripod:
amzn.to/2mLXrU0
Bird-Eye View Tripod:
amzn.to/3b3RWYy
Rode VideoMicro Microphone:
amzn.to/2Ol9KDp
Rode Wireless Go Microphone:
amzn.to/3ed5Wkv
Neewer Halo Light (2):
amzn.to/2LTANUK
Viltrox LED Light Panel:
amzn.to/39ZbSu4
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
🙏 We would greatly appreciate it if you considered supporting our channel while shopping on Amazon by buying anything you need on Amazon after clicking on one of the links above. This gives us a small commission at no additional cost to you and helps us continue producing more videos! Thanks a million for your support!!
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
⚠️ Disclaimer:
This video is for educational purposes. All appliance and HVAC repair work should be done by a trained professional. Word of Advice TV is not responsible for any possible damages or injuries caused by the use or misuse of the provided information.
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
📥 SPONSORS / Collabs:
Would you like to partner with Word of Advice TV? 🤝
Email: WordofAdviceTV@gmail.com ✍️
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
#wordofadvicetv #furnace #heating #hvac #airconditioner #airconditioning

Пікірлер: 245

@misterindependent7994 4 жыл бұрын

11 in one with the shrader valve remover and mini flathead.

@Brotatochip1702 4 жыл бұрын

I use an empty altoids box to put my drill bits. Just throw it into my service bag and set to go..... total cost like $3. Great vid my friend!

@johnmoxley9161 4 жыл бұрын

I use on to hold my mini tube cutters. It holds two

@WordofAdviceTV 4 жыл бұрын

@Daniel Ortega That's a great idea!! :) Thank you for sharing!

@trunks2505 4 жыл бұрын

Yeah, it's compact and a complete open tin space.

@bigDrob 4 жыл бұрын

Telescoping magnets work great for pulling tstat wire. Tie a small link chain to one end of the wire, drop it into the wall, use magnet to go in the wall and pull the chain through

@WordofAdviceTV 4 жыл бұрын

Oh wow, that's a pretty neat idea!! Thank you for sharing!

@avrohompam5601 4 жыл бұрын

The bit I got on my drill almost always is the malco 5/16"-1/4" bit it's amazing and it doesn't clogged with little metal shavings

@hooner2009 4 жыл бұрын

Best HVAC invention EVER

@synthetictruth671 10 ай бұрын

You nailed it bro I spent $30 on that Klein 7 in 1 Malco put it to shame with retention of screws the Klein was amazing for all the other sizes other than 5/16 1/4

@steveo7624 4 жыл бұрын

Malco 1/4 5/16 driver love it

@WordofAdviceTV 4 жыл бұрын

Just looked it up. Looks awesome!! Thank you for sharing! I may have to get that one :)

@mrgreen2646 4 жыл бұрын

I have 4 of them two for each of my two dtills and two for backups lol.

@PH-md8xp Жыл бұрын

💯 percent on your list of useful tools. It’s impossible to have too many tools!

@rogerkennedy8849 4 жыл бұрын

Malco 1/4 5/16 flip bit is a great tool no cleaning junk out of the bits with this tool

@WordofAdviceTV 4 жыл бұрын

That looks like a sweet little tool! Thank you for the suggestion!

@scoobyroorogers 4 жыл бұрын

Yes for sure...

@johndeford484 4 жыл бұрын

I borrowed one from a friend today... immediately went out to pick one up for myself!

@misterindependent7994 4 жыл бұрын

I keep extra in the van. I'm lost without it.

@alexthomas1524 4 жыл бұрын

I have had mine for about a month( malco 2in1 1/4-5/16) always gets stuck and have to bust out the channel locks to switch it around. I would personally recomend the dewalt magnetic clean out bits way better they have a slide on them that pushes the magnetic part of the bit all the way out favourite bits.

@markallan9050 4 жыл бұрын

All very good tools. Another few that are under $30 that are good to carry are: 11 in one screwdriver Non contact volt detector Inspection mirror Service wrench with gas valve test port bit Malco 5/16 and 1/4" combo impact bit Husky precision screwdriver set Titan palm ratchet with screwdriver bits All little cheap trinkets i cant live without when servicing furnaces. Also cool pro tip you can tape or wire a match to your extendable magnet to light tough to reach pilots. Theres a company that makes a tool called the extend a match which is like a telescoping alligator clip for this purpose. Sweet video man!

@WordofAdviceTV 4 жыл бұрын

Very nice tool suggestions! Thank you for the list! :)

@kronosert257 9 ай бұрын

Heck yeah. Starting out I got Walmart brand tools. Tool bag, drill, everything. I spent $130 and got most of what I needed to start out.

@WordofAdviceTV 4 жыл бұрын

Happy Thanksgiving everyone!! :) :) :)

@ricardogarcia4523 4 жыл бұрын

Thanks!! You too. Keep up the good work!! 👍👌

@Honestandtruth 4 жыл бұрын

Yep yep to you and your family Happy Thanksgiving And to All people everywhere and Peace 🙏😇👨‍👩‍👧‍👧

@hp440mag6 4 жыл бұрын

As far as lights go, I like the Braun 63958. $20.00 at Harbor Freight.

@lancerudy9934 4 жыл бұрын

One of the go to tool is the Allen head set . If I need something to do something I use the Allen head set it help so much

@WordofAdviceTV 4 жыл бұрын

Yes! I have an Allen head set as well and it's great to have! Thank you for the tool suggestion!

@servicetechhvac4455 4 жыл бұрын

Thanks Jay with Word of Advice TV!! That's a winter wonderland up there!

@alexthomas1524 4 жыл бұрын

Everyone says to use the malco1/4-5/16, I personally hate fighting it, it always gets stuck and have to use chanel locks to switch it around, my favorite bits are the dewalt magentic clean out bits(1/4,5/16,3/8) they last FOREVER and are a breeze to use. By the time I grab my channel locks and flip it around I might as well have switched bits. Installer/tech

@jackpierik3017 4 жыл бұрын

Hi My first impression of you and your videos was ... negative. I was wrong. I have learned a lot. So... Thanks. (It’s hard to teach an old dog new tricks) 66 1/2 and learning. Please keep teaching; even from Hawaii. J

@WordofAdviceTV 4 жыл бұрын

I'm happy to hear that you gave the videos a chance and actually found them useful in the end. :) Thank you for leaving a nice comment!

@jtfishingadventures896 4 жыл бұрын

Good video! Small channel locks and a 10 in 1 for my cargo pockets! Keep up the good input! Thanks!

@hailthesuccubus5764 4 жыл бұрын

Heeeeeeey long time no see! I work industrial refrigeration now and I gotta say your videos helped me very much through school and when I’m doing ac side work. Thank you so much for sharing your knowledge and explaining how each components better then my HVAC-R teacher

@petesingh292 4 жыл бұрын

One very important tool you missed out is heavy duty magnet that keeps the door switch closed while you checking furnace in the attic

@wb5mgr Жыл бұрын

I recently had to work on a piece of equipment where I ran into a situation that I had to go down to the hardware store and purchase two of those 12 inch Milwaukee extensions and a 6 inch one and put them all together as one large extension because I couldn’t reach in there with my arm due to space restrictions and I didn’t want to have to take the front off the piece of equipment just due to the amount of fasteners I would have to remove… What a pain in the keister. It worked out OK but that’s the first time I’ve ever needed like a 30 inch extension and the funny thing was I was using it with my little Kline mini ratchet because the fasteners were a little tiny fasteners that I didn’t want to strip out.

@jimharris1590 2 жыл бұрын

Well done!!! Impressions do matter---Columbus was told that he would fall off the edge of the world--but we knew that he would come around!

@agrayday7816 4 жыл бұрын

10 additional helpful tools: Kneeling Pad Extra Thick (w/ Built in handle) For us Old Guys. 6" Machinist Rule and /or Stainless Steel 1/4" 6ft. pocket Measuring Tape. Magnetic Fluke meter holder - hands free meter work. Pocket Tungsten Scriber with Magnet - marking & picking things up. HVAC Tables, Equations & Rules of Thumb Quick-Card. Klein 3 in 1 precision pocket screwdriver. Lighted Mirror Extension Tool. Fluke non Contact voltage tester. Folding Utility Knife. Pipe Clamp Thermocouple (preferably two)

@WordofAdviceTV 4 жыл бұрын

Wonderful list!! :) Thank you for sharing! I have a Fluke meter as well and I do have that magnet for it that you mentioned. All the others are good tools too!

@brayanmorales2495 4 жыл бұрын

I like the 11’1 tool

@WordofAdviceTV 4 жыл бұрын

It's very nice! Thank you for the suggestion!

@elcatracho58 4 жыл бұрын

Awesome, you always help.

@josebarraza2251 2 жыл бұрын

Thank you for sharing your tips and experience in the trade. Would you be willing to share what you feel is the best work clothes, gloves, and footwear you believe is beneficial in the HVAC career field? Thank you for considering.

@Bluecollarworkingman 4 жыл бұрын

protip: take your 3.2amp fuse and use it conjunction with alligator jumper... now you aren't limited to spade terminals. I make a set of "low voltage jumpers" everytime I see those fuses.

@hosocat1410 2 жыл бұрын

New learning tech here. I really appreciate your videos. Great info and understandable. Thanks!

@DayClanTribe 3 жыл бұрын

Really loving led flashlights these days but detest any light that i have to click 3 times to shut off! Very hard to find.

@dannyg751 4 жыл бұрын

Thanks!! I just added 5 of these items to my Amazon cart!!!

@cecilall4150 4 жыл бұрын

Great video, very informative.

@holtrussell 4 жыл бұрын

Well done Jay. Happy Thanksgiving!

@JmieYoutube 4 жыл бұрын

Subscribed! Awesome video man, thank you for this!

@WordofAdviceTV 4 жыл бұрын

You're welcome! Glad you liked the video, thank you for subscribing and leaving a comment!

@ericdiefel4505 4 жыл бұрын

Klein 1/4" x 5/16" mini ratchet offset wrench. One of my top 5. You can get screws in or out will other tools will not go

@anzeusnarine247 4 жыл бұрын

Great advice 👍

@ericw1744 4 жыл бұрын

Hilmar makes a great 9 in 1 with a Schrader bit. I also like the double ended nut drivers. They come in 3 and 6 in. One side is 1/4 the other is 5/16. Both magnetic

@samv2783 4 жыл бұрын

Great video! Very useful tool list!

@WordofAdviceTV 4 жыл бұрын

Thank you Sam! Glad you liked the list!

@thatGuy-yj8bk 4 жыл бұрын

You can get a pretty decent headlamp that’s key to diagnosing. Maybe 30-$40 tho.

@WordofAdviceTV 4 жыл бұрын

I agree, a nice head lamp is good to have! Thank you for the suggestion!

@joecephus352 3 жыл бұрын

I picked up a milwaukee lamp for about 30$ and its pretty awesome. 5 settings super bright and the head band had a built in sweatband

@shermdaddie 4 жыл бұрын

Great info

@jozeflak1868 4 жыл бұрын

Happy Thanksgiving to you and your family thanks for all the info .

@WordofAdviceTV 4 жыл бұрын

Thank you! Happy Thanksgiving to you and family as well!!

@ronniehvac653 4 жыл бұрын

Hey Jay, I have 9 of the 10. I'll get my dental scraper tomorrow. You're missing a Klein stubby multi. Also I bought a Skil USB rechargable screwdriver/drill driver for under $30 on Amazon. It's compact and pivots to a pistol grip. Only powerful enough to remove door screws but that's all I want it for.

@WordofAdviceTV 4 жыл бұрын

Oh wow! 9 out of 10 is impressive! You must have all the right tools to make life easier then! :) Thank you for the additional suggestions! A few of my co-workers have those "mini-guns" you mentioned and they love them!

@rmiller6483 4 жыл бұрын

Awesome video as usual Jay. Happy thanksgiving to you and your family...👍👍👍

@WordofAdviceTV 4 жыл бұрын

Mr. Miller, thank you! :) Happy Thanksgiving to you and family as well!!!

@josetorres3355 4 жыл бұрын

Happy Thanks Giving boss!

@WordofAdviceTV 4 жыл бұрын

Jose brother... Thank you! Happy Thanksgiving to you and family as well!!

@johnmendoza6421 4 жыл бұрын

Great information

@WordofAdviceTV 4 жыл бұрын

Thank you John!

@jfiguet205 4 жыл бұрын

A Cooper pipe swager is a great option. Nice to expand the pipe when you are out of unions.

@Eddy63 4 жыл бұрын

Good little vid Jay ... Happy Turkey Day to you and the lovely Misses ...

@WordofAdviceTV 4 жыл бұрын

Thank you Eddy! Happy Thanksgiving to you and family as well!!!

@johnvas4173 4 жыл бұрын

Dollar Tree sells that dental pick in a set with a tongue scraper and mirror.

@fixinggrace 4 жыл бұрын

Sometimes you can get those magnetic trays for my O’Reilly’s auto parts for free. I got 10 of them just because one of the people behind the parts counter was in a good mood. Never hurts to ask

@ALCRAN2010 3 жыл бұрын

Seriously?

@synthetictruth671 10 ай бұрын

Definitely recommend adding the flip bits they’re the tops when it comes to fasteners

@ultrafaga1947 4 жыл бұрын

I prefer a bright headlamp over a magnetic torch. Never used a magnetic tray. I simply use silicone to glue a magnet to the top of my drill.👍

@j.arevalo4461 4 жыл бұрын

Young man, these are very good tips for what small tools to have handy. I hope you and yours had a wonderful Thanksgiving!

@WordofAdviceTV 4 жыл бұрын

Thank you!! :) Thanksgiving was great! I hope yours was the same or better!

@pizzle1011 4 жыл бұрын

A speed bit!! Under $20 @ Harbor freight. It's great for different size hole drilling in sheet metal. Also, a 6 in 1 screwdriver with 1/4 and 5/16 nut driver opening

@WordofAdviceTV 4 жыл бұрын

Both amazing tools to have!! Thank you for the suggestions!

@tonybullet7250 4 жыл бұрын

You are the best! Happy Thanksgiving!

@WordofAdviceTV 4 жыл бұрын

Thanks Tony!! Happy Thanksgiving to you and family as well!

@trunks2505 4 жыл бұрын

I have all those tools already(except the last of course). I was searching through the HVAC reddit boards, seen, and started collecting tools that different techs swear are life savers. I'm an installer so the jumpers and my "Short pro tool=mini 24v breaker" are the only two tools I rarely use. Do you have 5 honorable mentions? I clicked this video pumped to see what the KZfaq channel I frequent the most had that could be special only to already have them. BTW, of course, thank you for this. Without Reddit, this video would have helped me immensely. I have techs where I work, most don't even have tools like this and they're not expensive. Or if you make another to the $75 dollar range, I'll be sure to check that out too. I most definitely consider this a top notch KZfaq channel for HVAC. Extremely helpful. Oh yeah, I don't have magnetic jumpers though.

@WordofAdviceTV 4 жыл бұрын

Ah man.. Sorry to hear you already have all those and nothing stood out to you. Thank you for the positive comment though! This video is getting a lot of tool suggestions in the comments so there's a good chance there will be a sequel later on :) I am thinking of perhaps splurging and buying 10-20 suggested tools that I don't yet have and making a video with those next.

@vladekvladinov5753 4 жыл бұрын

I collect the circuit breakers on salvaged Lenox furnaces.

@WordofAdviceTV 4 жыл бұрын

Haha yep. The one in the video is from a Lennox furnace ;)

@emmanuelrivera6007 2 жыл бұрын

Really really great video, and a great recommendations to me that i starting, thats man

@bill944 4 жыл бұрын

I use a couple of long, straight forceps and a strip of scotch bright pad to clean those hard to reach or remove flame sensors. Saves you from having to remove them with the flexible bit extension. Just have to make sure the flame sensor is cooled off.

@WordofAdviceTV 4 жыл бұрын

I can only agree with that! :) If I don't have to take it out to clean it, that's even better! Thank you for sharing!

@tonymmm2850 4 жыл бұрын

Great video my friend thanks

@WordofAdviceTV 4 жыл бұрын

Thank you! Glad you liked the video!

@monteglover4133 4 жыл бұрын

Non-contact voltage detector

@hooner2009 4 жыл бұрын

Get shocked enough times because your meter gets a false reading and you will be happy you got a NCVD.

@vegamann6252 4 жыл бұрын

I have a silver spoon great for lunch time see you at New Years ! :). By the way thanks for the videos Happy Thanks Giving !

@WordofAdviceTV 4 жыл бұрын

Haha I actually always have a silver spoon in my lunch box as well :) They are natural dis-disinfectants.

@dominicm2175 4 жыл бұрын

Great video going into the gift giving season ! You can easily re-title it as stocking stuffer ideas for your favorite tech.

@WordofAdviceTV 4 жыл бұрын

Ah, I totally forgot about Christmas! That's a good idea, I don't think I will rename it at this point but I will add that line to the description. Thank you for the suggestion!

@dominicm2175 4 жыл бұрын

@@WordofAdviceTV When the views die down, you can recycle the video with a new Title..hahaha...then KZfaq will give you a copyright strike for copying your own video !!

@WordofAdviceTV 4 жыл бұрын

@Dominic M Lol, I will just wait and see what happens. I rarely change title names but never considered it as a tool to garner views.

@billkrause4585 2 жыл бұрын

How about an Inspection Extension Mirror? I like your 3AMP Circuit Breaker idea, and the magnet flashlight. Now I want one!

@gilbertomejiajr1706 4 жыл бұрын

Another great video

@WordofAdviceTV 4 жыл бұрын

Thank you!

@sergiomuniz9242 4 жыл бұрын

Love ur videos.

@WordofAdviceTV 4 жыл бұрын

Thanks Sergio!

@zekenzy6486 4 жыл бұрын

great video. Thank you for sharing ^_^

@WordofAdviceTV 4 жыл бұрын

And thank you for watching :) Happy Thanksgiving to you and family!!

@kurtiskile5575 4 жыл бұрын

The alligator furnace door switch tool is awesome for diag. Usually on amazon for $15-$25

@WordofAdviceTV 4 жыл бұрын

That thing looks sweet!! Thank you for the suggestion! I think I'll have to get that :)

@Honestandtruth 4 жыл бұрын

It's just the question okay JAY. Do you ever had a power outage ?? Do you have a back up Generator ??? I think people should have One.

@jaimegonzalez6926 4 жыл бұрын

Great video any little tool is useful I have an idea on what to get thank you sir.

@WordofAdviceTV 4 жыл бұрын

You're welcome! There are some great suggestions in the comments too by the way :) Happy Thanksgiving Jaime!!

@jaimegonzalez6926 4 жыл бұрын

Happy thanks giving you too thanks for all your help.

@stevespears1970 4 жыл бұрын

since both options I was gonna mention have already been mentioned the Malco 1/4" & 5/16" bit and a decent head lamp I'll mention to ALWAYS wear a face mask when in attics. I'm paying the cost for figuring this out late in the game

@WordofAdviceTV 4 жыл бұрын

That's very good advice, thank you!!

@waleedhantash6102 4 жыл бұрын

I can’t believe u didn’t mention malco (5/16 and 1/4) And my best tool is 6 in 1 screw driver ❤️

@WordofAdviceTV 4 жыл бұрын

I have the 11-1 screw driver but I don't have the malco! I will repent and order one :) Thank you for the comment!

@rayzerot 4 жыл бұрын

If he thinks he likes that flashlight, he would go nuts over Klein's rechargeable personal flashlight. It's that light but better- adjustable in 360 degrees, rechargeable, and you can charge your phone with it.

@charlesmalinoski6325 4 жыл бұрын

A snowmobile... To get to those Michigan Blizzard Emergency No-Heat Calls. A little over $35 tho. 😂 Happy Thanksgiving to you and yours Jay . 🦃

@WordofAdviceTV 4 жыл бұрын

Haha there was actually one time when my previous employer briefly considered that idea though. No joke :) After a few massive snow storms. Happy Thanksgiving to you and family as well!!!

@charlesmalinoski6325 4 жыл бұрын

Word of Advice TV Thank You. I know your from big snow country too. Big time cold also. Enjoy those furnace calls. Making them bucks, keeping people warm and safe. 👍

@benjaminlam4770 4 жыл бұрын

Awesome video BUD. Appreciate your sincere effort AND commitment in making these videos. RESPECT.. (from DFW, Texas) 1. Milwaukee 6 in 1 Wire stripping and Reaming pliers. 2. Klein 4 in 1 Precision electronics screwdriver. 3. Klein 1/4" and 5/16" nut drivers. 3. Yellow Jacket Gasket removal tool. Just to name a few "brand specific" basic tools that from my own experience, have found really solid and well built. As far as listing the Nut Drivers. My thoughts are that for the simple tasks such as taking off an electrical compartment cover or pulling a flame sensor, using an "old school" nut driver is as, if not, more effective practice. How many outdoor covers have we come across that are not able to be properly secured due to stripped screw holes from being over torqued by impact drivers? Too many in my experience.. Reducing this problem in the field would be a win for all of us. Just my opinion, does anyone agree?

@WordofAdviceTV 4 жыл бұрын

Thank you Benjamin!! Glad you like the videos and appreciate your comment and the additional tool suggestions! I agree that it is annoying to find stripped screw holes. The Milwaukee drill I showed at the end is the one I always use and it has a low spin speed which reduces the possibility of stripping anything. Haha well and most of the senior techs I worked with drilled it into me.. The fact that I should NEVER set the torque high. "2 is as high as you can go" Lol. I also work on other household appliances that have a lot of plastic parts, having the torque set low becomes even more vital with those.. I wish I would have mentioned this in the video but thank you for bringing it up! Maybe I will make a separate short video about setting the torque low. Interested to see what other veteran techs will have to say though :)

@benjaminlam4770 4 жыл бұрын

Update: Since watching you showcase AND speak on your Milwaukee screw gun, I actually picked one up at Home Depot. On sale for $59 that day! I must say that I am really enjoying it. I am a hvac service technician. You were right about the clutch feature. Works great for applying just enough torque. I also really enjoy the size and weight of it. Thanks for exposing me to it. IDK if you’re into open top tool totes but i just picked up a Veto MCT-OT and it’s pretty awesome.

@WordofAdviceTV 4 жыл бұрын

@@benjaminlam4770 Glad to hear I was able to talk you into getting a Milwaukee drill! :) I am sure you will love it! Sounds like you like it so far so that's good.. I looked at that tool bag, it looks nice! Thank you for mentioning it but I have a similar one by CLC.

@renesalinas9491 3 жыл бұрын

Best advantage of the lamp are the exchangeable batteries.

@classic287 4 жыл бұрын

😂. I’ve seen all your tools and have them, except that small turn adapter. I’ve seen bigger ones. And i’ve never seen the magnetic jumper. Cool 😎 video. Happy Thanksgiving 🦃

@WordofAdviceTV 4 жыл бұрын

Haha long time subscribers like you, probably have seen most of my tool bag by now ':) Thank you Mr. Classic! Happy Thanksgiving to you and family as well!!!

@classic287 4 жыл бұрын

Word of Advice TV, All the animals came to the ark together. Even the insects came in pairs, except the worms, they came in apples....

@classic287 4 жыл бұрын

Word of Advice TV, Did you hear about the successful cows? They were out standing in their field

@WordofAdviceTV 4 жыл бұрын

@classic287 Haha those are fun small jokes :) Thank you!

@bryantylerservices 4 жыл бұрын

Love the Hawaii story.. And vacation story... Lining in the silver spoons...lol Bryan Tyler Refrigeration

@WordofAdviceTV 4 жыл бұрын

Haha glad you liked it man :) Thanks for watching!

@BloodSweatnBass Жыл бұрын

Do a vid just like this with just electronic tools for HVAC... Thanks

@OneManParade 4 жыл бұрын

I wear a leather pouch that hooks on my belt. I keep all my essential bits that fit my impact driver. Always there at hand when I need them.

@MrVailtown 4 жыл бұрын

Agree need a solder iron. Been on jobs where was a cold solder joint & was middle night holiday, had a spare board . Replaced 4-5 of them that winter. A solder iron been a temp fix. Carry more than two jumpers , seen some elaborate units where used three. Dental pick is good for O ring removal. One last thing, keep a small bottle of pain pills some where in your bag or Van , ammonium A.D. Also. I've been out 30 hours strait a few times in the old days, even a few caffeine pills . Ya I know it's crazy, I'm retired now, but the company when burners where out forgot you where human.

@WordofAdviceTV 4 жыл бұрын

All wonderful suggestions and tips!! Thank you for sharing! Happy Thanksgiving to you and family!!

@jjengelbert 4 жыл бұрын

All good things A few must-haves you missed that I use EVERY day: a kneeling pad - your knees won't last forever Right angle needlenose pliers - good for lots of things, but especially for hose clamps at weird angles Small 1/4" ratchet set Thumb driver - super handy on its own, and as an adapter www.lowes.com/pd/Kobalt-4-Piece-Steel-Handle-Ratcheting-Multi-Bit-Screwdriver-Set/1000566887 And this is one of the best tools I've ever used - parallel, smooth jaw, pliers - the mini version is perfect for tool bag and small spaces KNIPEX Tools 86 03 125, 5-Inch Mini Pliers Wrench

@WordofAdviceTV 4 жыл бұрын

All great tools!! Thank you for the suggestions!

@Ahmed-bn7zv 4 жыл бұрын

Your videos always deserve a like and a refer to a friend.

@WordofAdviceTV 4 жыл бұрын

Thank you Ahmed! I appreciate that! :)

@Ahmed-bn7zv 4 жыл бұрын

@@WordofAdviceTV I really admire your work brother and all the stories and advice and jokes you tell at the end of most of your videos. Unique

@WordofAdviceTV 4 жыл бұрын

@Ahmed Thanks again! :) Good to hear that you like the non topic related content as well!

@jasonb.1749 4 жыл бұрын

The Pookie Buster

@gunsofsteele 4 жыл бұрын

You've got a magnetic personality!

@WordofAdviceTV 4 жыл бұрын

Lol, thank you!

@ishwarrajput3914 4 жыл бұрын

*** Thank you very much. sir. I really learned a lot. good information. *****

@WordofAdviceTV 4 жыл бұрын

Glad to hear that! Thank you for watching and leaving a comment!

@manuelnieto3309 4 жыл бұрын

Great video does anybody else here the resemblance in his voice to Gru from despicable me when he is presenting his inventions. Lol

@WordofAdviceTV 4 жыл бұрын

Thanks! Although I don't remember if Gru was the mad scientist or the main villain character..

@evansymon5376 3 жыл бұрын

Klein insulated multi and Milwaukee M12 Fuel impact.

@rbilardo47 4 жыл бұрын

I'm not a HVAC technician, just a DIY'er, I just ordered the lim 25" Durable Telescoping Magnetic Grabber, I have a larger one that just doesn't fit everywhere. Always another great set of must have's is: Magnet 3 x LED Magnetic Pickup tool, Telescoping Flexible Extensible Led Flashlights,Perfect Mechianic pick-up tools gifts for men, 4 x LR44 Batteries (Included) 1Pack $11.99 a set of 3, good buy on amazon. Check them out. Sorry about the large fonts, I just copied and pasted off amazon, a lot of typing, sort of goes hand in hand with the drill gun vs using a nut driver by hand. lol. Thanks for the video, very helpful for many of us.

@WordofAdviceTV 4 жыл бұрын

Oh yesss, I love the fact that it is so slim and can get into tight spaces too! I have an extendable extension mirror where the mirror can pop off the magnet and the rod can be used as a grabber but it is so bulky that it doesn't help half the time. And thank you Robert!! Those are great suggestions!! You guys are leaving so many tool suggestions that I am pretty sure I will have to make a sequel to this video after I buy 10-20 of them :) Happy Thanksgiving to you and family!!!

@rbilardo47 4 жыл бұрын

@@WordofAdviceTV Thank you and keep the videos coming.

@spreadcreekjr1731 4 жыл бұрын

Great

@mrgreen2646 4 жыл бұрын

My favorite tool under 30 bucks would be a note pad, pen, flashlight, thermostat screwdriver, and my klien magnitizer

@donaldpainter956 Жыл бұрын

I bought one of those fuse popper tools years ago and it was the very first use I put it on and I found the short because it didn't pop out and the board started smoking and popped the transformer so it came from the factory messed up I just keep a crowd of fuses but I did find a short finder tool it will flash when there is a short and then you search and when you find the short it stops flashing

@johnnysaltyaircrabcake8030 4 жыл бұрын

Testo 550 gauges.. Digital..will do superheat,subcool instantly, pressure across dryers AND has a Zero pressuring option, something a Bluetooth set up has

@WordofAdviceTV 4 жыл бұрын

Nice little tool! Thank you for the suggestion!

@johnnykurplutzo6789 2 жыл бұрын

My furnace has 5 amp blade fuse. Do I still use 3 amp breaker? Ty

@abdorakeebnaji1527 4 жыл бұрын

👌👌good i have all of them..🙂

@WordofAdviceTV 4 жыл бұрын

Nice! :) I just filmed another video with 15 more tools (most of the stuff other people suggested in the comments of this video)

@haunguyen-tr2zm 4 жыл бұрын

Thank you, I have just order some tools.

@WordofAdviceTV 4 жыл бұрын

You're welcome! Glad I could introduce you to some new tools :)

@richardwagner282 4 жыл бұрын

About the magnetic jumpers, aren't most thermostat set screws made of aluminum which magnets will not work on?

@raymondhahn1362 3 жыл бұрын

One tool that really comes in handy is used in gas welding and brazing it is a tip cleaner that also works very good for cleaning out offices on standing pallet stoves and standing pilot either oil or gas burning furnaces

@darrenmcnulty8188 4 жыл бұрын

Angled needle nose pliers....you know why ;-) Try pen light with magnetic pocket clip....$8 a pop

@WordofAdviceTV 4 жыл бұрын

Both great tool suggestions!! Thank you! :)

@picklerix6162 4 жыл бұрын

Thumbs up for the angled long nose pliers. I finally bought some pliers at Harbor Freight and they saved my life the next day.

@WordofAdviceTV 4 жыл бұрын

@PickleRix Just to satisfy curious readers, if you don't mind sharing... What did they help you with or how did they help save your day?

@danielc.3725 4 жыл бұрын

Hmmmm 🤔, I was gonna say, what about, "HARBOR FREIGHT" , man, they have all those tools there and then some for real cheap prices, and if you sign up with your EMAIL you even get coupons sent to you as well..., and they're always having sales big sales like clearance sales, parking lot sales, holiday sales, you name it.!!! I mean, Amazon is cool and all but sometimes you like to browse through other tools and when you go to A H. F. store everything is right there, I mean, you're like a kid in a candy store!!, LOLO 🤣 😂 👍

@kyle8293 4 жыл бұрын

schrader torque wrench with the storage compartment

@kkovler1 4 жыл бұрын

Unless I missed it a solder iron should also be one of the tools you got to have. either battery or a/c type. Also my favorite tool is a multi meter, you can only go so far in diagnosing without one.

@DavidMay2nd 4 жыл бұрын

Ummm. No.

@WordofAdviceTV 4 жыл бұрын

@kkovler A solder iron does save the day sometimes! Thank you for the suggestions!

@steveo7624 4 жыл бұрын

nice

@WordofAdviceTV 4 жыл бұрын

Thanks ;)

@whitewolf4016 4 жыл бұрын

Cool

@WordofAdviceTV 4 жыл бұрын

Thank you Mr. Wolf!

@sergiomuniz9242 4 жыл бұрын

Any advice on how to land an entry level HVAC Tech gig after at least a 13 year abscence in the field. I did 3.5 years for a Mechanical outfit and I do have my EPA cards for handling refrigerants. Also graduated from HVAC school.

@WordofAdviceTV 4 жыл бұрын

I don't know what state you are in but here in Minnesota I am sure you would be hired real quick. I would first decide whether to do residential or commercial and then apply in a couple different places close to where you live. Techs are in pretty high demand right now so I don't imagine you will have a hard time getting a job in the field.