The toothbrush now has a distinct taste of minty road

If yer going to put your lid on your gloves on the floor then put the gloves palm up not palm down .... if you get grit on the palms of your gloves its real easy to damage your paintwork with it if you then put your gloved hand on the tank at any point 😉

Cool stuff. Tip at the zip tie tip (tip-ception): If you feed it in backwards, you can undo it and reuse after.

MAN THE CHINGUARD TRICK IS ABSOLUTELY GOLD THANK YOU SO MUCH

Man..seriously the effor u put in those tiny clips.. and editing was seriously awesome... Most of em..wont recognize it... but if u have some editing exp.. definitely..u can see his hard wrk.. This Guy deserves more subs..

CC: Sees WD40 Also CC: I’ll take your entire stock! 1:47

I love how smooth the transitions are between hacks. You definitely deserve more subs

You can hold the ice cream tub to the tank by putting a decent magnet in the tub first, because you know that as soon as the tub is full, an elbow will send everything crashing to the floor.

I have a 'hack' that works very well. When removing decals, heat them first with a hair dryer. Wave a hair dryer over the decals and they will become soft, and peel right off in one piece, and leave very little glue behind. (But do NOT use a heat-gun as it will damage the paint.) A hair dryer works wonders.

Hey man, hope you're enjoying our lovely UK weather lately 😂

Hacks that all riders can benefit from, great job CC! 👍🏻

I liked all of your hacks, they're very handy. However, for the first one, I would recommend either a different option, or and addition. Years ago, I got myself a magnetized tray, two in fact, a large and a small. Yes, there is a cost, but metal parts don't get lost. The addition I might recommend is to find some sort of strong magnet that you can secure to your ice cream tub. There's nothing worse than kicking or dropping your container of parts, as it sits precariously on your motorcycle seat, and losing most of them. Yes, put the lid on and cutting a hole in it is a nice trip back to the hack. Just an idea.

Awesome - cleaning the dirty switches is perfect timing - my blinkers switch went on the blink this morning in the cold!

Again this biker making my day with best youtube videos😀😀😀

this was another great video on bike hacks! love the skin skirt idea! will be cutting up a t-shirt this weekend!

Great video man. Just loving this series of hacks👍🏻

Instructions unclear. My toothbrush tastes like dirt

Awesome tips n trick, mate. Thankyouu 😇🤩🤩

That's a great way to check chain slack thanks. The hack with the helmet on the gloves also very good. I've been doing it for years, and it works every time.

This helped me a LOT! I canceled some of the wind noise of my helmet. Thank you

Who else paused the vid to see if he actually used the dirty toothbrush? 😂

8:55 I use the good old 'I put my helmet on my arm...yes the maneuverability of the arm is a bit crappy but avoids any dirt to stick on my padding a small price to pay for salvation' method

It’s amazing after all these years away from my second patriot country where i lived in vanderbijlpark for many years I follow someone who actually has a very good KZfaq channel in which I follow very recently with all the attention in the world to this fellow motorcyclist, keep up the good work and cheers Boet keep it up

Great tips. Love the kitchen timer! 😆

Loved the time lapse part 😍

VR46 fan, nice 👌

Grate job m8, rock and roll !😎

Your all hacks are favourites. Thumbs up for you. 👍👍👍

love the video bro it was worth waiting! awesome as always.

Most of the hacks I already knew, and even use some of them, such as the gloves on the ground, the sanitizer for cleaning, toothbrush, spanner. But I probably will use an old t-shirt to make a chin skirt for my other helmet, which didn't come with one. Love your videos!!! please keep them coming. They are very creative, beautiful lighting and imaging, informative, and very useful!

Loving your vids, new subscriber right here!

Paused this video to go remove the sticker on my bike now that I have something to remove the residue with haha great video as always!

Absolutely loved all the hacks man!🙌🏻

Another well shot video and very helpful

Awesome video!! You have a new subscriber from Spain.

That chin skirt hack is genius!👌🤤

Hey just watched 3 of your videos! Fun stuff! Cool trick I learned from the race track for cleaning your fairings, tank, helmet etc.... instead of the expensive plastics cleaner- use LEMON PLEDGE and a micro fiber cloth - just as effective and 1/10 the price! Also, spinning the bike 180!degrees on the kick stand- super helpful for parking/maneuvering . Keep it up!

all of those hacks are great, I'm now a subscriber

Taking delivery of a 2018 MT-09 next week!! Definitely gonna be re-watching a lot of your videos

Great ideas, thanks

The Helmet chin guard is just Awesome.... N much more practical in daily routine.. Thanks mate.

Thank you so much for the Chin skirt hack

I love the continuous story style of video to get from on thing to the next very creative!

Came up with the selfmade chinskirt years ago and it changed my life. The few people I got convinced of trying it said the same. Cheap helmets are sadly the go to in South America. I since have started to value my safety more, and better helmets mostly aren´t in need of this DIY upgrade.

Great video man I think my favorite is the helmet on top of the gloves

Thanks for the helpful tips 👍🏻

Very informative,easily accessible at home!!!

I transitioned very nicely with the buff being my mask during riding. 👌🏾👌🏾 Awesome video Chaos👍🏿👍🏿👍🏿

Definitely be using my kitchen timer for my time lapse videos!! Nice hacks! Ride safe boss!

The sanitizer hack is awesome as soon as I saw it I grabbed a rag and hand sanitizer and got that nasty residue off👍👍👍

Alcohol attacks some plastics, particularly acrylics. WD-40 or similar light lube is a better adhesive remover than alcohol. Nice easy tips. Thanks.

The manly ladybug was the best one 😎, on your last video I did comment that was my favorite gopro mount! Thank you for this hack that will give me great shots, your videos are always inspiring and awesome! 💯😄

Cool video man. Useful stuff, entertaining and very different content to others. Keep it up!

Great video again!

Just stumbled over your channel when browsing for bike content. You do great videos with useful hacks and a nice touch of humour. Funnily enough I usually spend my summer holidays in Cornwall and always have a ride on my motorcycle brought over by trailer (from Switzerland) trough Dartmoor and its surrounding locations. On this video I saw the weather information depicted on your mobile phone located for Okehampton. So now its clear why I can understand your English so easily. If you ever come across on the road with a biker greeting you by the continental style it might be me.

Like the chinskirt and cable tie 👍🍻

Even Being Early I'm Always Late To Comment Anyways Great Content As Always Keep Going Chaos!🙏💚

Awesome edits.. in a somehow moments . ✔️✔️✔️✔️ Great work Dude

Very Very Good job , Mate . I like the Egg Timer disco ......... ha ha ha hhaa......

nice video man!! ur video is top notch quality! love from philippines!!

Top job as always 👍🏻

Excellent 👌🏽

Loved the chin/tshirt hack and the #46. The camera one is unique too. Entertaining always. Be safe Sir

I really liked the ladybug timer, t-shirt and wrench hacks

Probably one of my greatest "hacks" is ALWAYS carry zip ties. You NEVER know when they may come in handy in about a zillion ways on the road and at the roadside :) Keep it up!

Nice video !

Another great video! Getting close to 100,000 subs! YT plaque arriving soon. Well deserved.

The zip tie on springs - absolutely 10 out 0f 10. The rolling helmet - Had me hanging from the ceiling.

Enjoyed

Got to say... best part about this video was the name of the ice cream 🤣, great video

Love the extra weight on the rear wheel hack 🍨

Waiting for this kind of videos so hard

Almost at 100k subscribers.... 👍 keep going

It's the cable tie 1 for me👌👌

simple and useful hacks. found the helmet chin cover quite interesting.

Ahhh never thought of zipties, great idea!

6:00 what did Guy Martin ever do to you ?

Great tie-wrap tip, however i would have kept a 'O' shape and just pull with a finger instead of pliers that could slip

really amazing bro

These videos are my therapy

First hack is amazing, I use a lot. Another interesting hack, is to use a large syringe and a hose to drain the brake fluid, without getting air into the system.

Calm down everybody! He is back at doing great videos! (The r1 is still missed though)

in fact, the chin curtain is a must done, i have to do it myself, great job ..

I love how he gives a story with his content.

I thought ice-cream tubs and old toothbrushes were a staple in every biker's tool kit! 😁

Nice work mate. Cheers from down under.

Here in the great white north you'll never have a problem finding an alternative to a spring hook, we play hockey and everyone has at least one ice skate lace tightener, eh.

I really love his videos ... Great work dude ... From india

Noooo, R.I.P. Guy Martin sticker :(

I haven't clicked on a video so fast recently. Great job.

Lots of love from India dude

Sub and like. My first bike - you needed wrenches to keep the goblins away. Straight screw driver and a 1/2 in - english Triumph wrench. It was a 70 Tiger 650. About every 200 miles - you had to pull over and pull the bowl off the single carb. Dump the rust and put it back on. Jets were always fine. You would know when to pull over - as she would not go over 50 mph - but she idled fine. 10 Min and you were rolling. Cheers.

You would make a great tutorial on how to drive a motorcycle, could you please do that :) Also love this series, keep it going :D

Amazing

That helmet hack was just amazing 😁😁

The last several helmets I've purchased have not come with chin guards. Thank you! With the weather now, I've literally been covering that spot with my gloved hand.

Always watching from Philippines Motojet

6:14 So you're a professional rapper 😂

Hey, can you do a video on stiff chain links and like when to replace chain and sprockets. It would be a lot helpful. Absolutely love your videos.💜.

As usual absolutely interesting and informative video greetings and salutations from Pakistan 😊👍