10 Useful 3D Printed Tools #2
Рет қаралды 432,260
2 жыл бұрынGet your things 3D printed at: www.pcbway.com/
WIN Prizes at PCBWay 4th PCB Design Contest: www.pcbway.com/activity/4th-p...
10 more 3D printed tools, which could be useful to you. You can buy this kind of tools from store, but why not to 3d print them.
✎STL FILES:
1. Trim/clip popper: www.thingiverse.com/thing:489...
2. Faker Knife: www.thingiverse.com/thing:489...
3. Tire groove measure tool: www.myminifactory.com/object/...
4. Razor scraper handle: www.myminifactory.com/object/...
5. Carparter's square: www.thingiverse.com/thing:434...
6. Oil filter wrench: www.thingiverse.com/thing:217...
7. Spray can handle/trigger: www.thingiverse.com/thing:450...
8. Poloh Brush: www.thingiverse.com/thing:171603
9. Equal space divider: www.thingiverse.com/thing:304...
10. Metric bolt and nut sorter: www.thingiverse.com/thing:465...
Big thanks to models creators!
✎MUSIC:
* Track: Vein - KV [Audio Library Release]
Music provided by Audio Library Plus
Watch: • Vein - KV | Free Backg...
Free Download / Stream: alplus.io/vein
* "Bombora - by Uniq" is under a Creative Commons license (Creative Commons - International Recognition 4.0 - CC BY 4.0)
* "Reverse - by Uniq" is under a Creative Commons license (Creative Commons - International Recognition 4.0 - CC BY 4.0)
✎3D PRINTER: Creality Ender V2
✎FACEBOOK: / 3d-printsbuilds-101348...
✎INSTAGRAM: @3dprintsbuilds
✎TikTok: @3dprintsbuilds
✎Cults3d: cults3d.com/en/users/3DPrints...
✎THINGIVERSE: www.thingiverse.com/3dprintsb...
#3dPrinting #Timelapse #3DPrintedTools
@Rebar77_real 2 жыл бұрын
Nice stuff. That "equal spacer" could use a wingnut on a small bolt to lock it in place to keep going without error. Thanks for the link!
@miked9959 2 жыл бұрын
I enjoy this type of video and appreciate the time and effort you put into it. It's a great way to get ideas for future prints. Thanks!
@3DPrintsBuilds 2 жыл бұрын
Thanks!
@Sembazuru 2 жыл бұрын
For the tire tread depth gauge and the bolt&nut sorter you can color the legends a little easier if you switch filaments to black (or other contrasting color) for the last couple layers. That'll save the marker issues that I always have of the ink running down and bleeding across the face of the part. The issue with the marker on the square is probably because the markings were debossed (sunken into the surface) instead of embossed (sticking out of the surface) like the tread depth gauge and bolt&nut sorter. But, since that was printed with the markings on a vertical surface, the color changing trick would be a major pain even on a printer that has decent M600 support.
@budgiefriend 2 жыл бұрын
Thank you for the update.
@taranagnew436 2 жыл бұрын
for the nuts & bolts shorter, you should add the size to the nut side
@3design284 2 жыл бұрын
nice combination of useful tools. keep uploading. good luck .
@3DPrintsBuilds 2 жыл бұрын
Thanks!
@wanderingcalamity360 2 жыл бұрын
Did you just super glue what is supposed to be a replaceable boxcutter blade into that "faker knife"?
@simonrancourt7834 2 жыл бұрын
In #2, how do you change the blade, if it's all glued ?
@jasond9824 2 жыл бұрын
It appears to lock in the blade out position, but not lock in the safe to carry position. What a stupid overall design flaw
@chrisnupp7097 2 жыл бұрын
@@jasond9824 I printed one, it locks it into both positions.
@chrisnupp7097 2 жыл бұрын
It's not supposed to be glued in place. There's a tab by the blade divots (where the blade locks in place) that you can push out of the way to remove the blade and replace it.
@theanimationkingdom4 2 жыл бұрын
U cant.
@arne6787 Жыл бұрын
Spray can handle needs an adjustable end stop so u can just sqeeze handle and set the exact spray volume without the need to hold just the right squeeze to get what u want for spray pattern.
@mohammadajmin1542 2 жыл бұрын
Look so cool that bro
@3dprintingmodels913 2 жыл бұрын
i like the concept very much 💕👌👍
@jasongibson4539 2 жыл бұрын
On your recessed groves,(like the carpenters square) you should try a wax crayon 🖍 instead of a sharpie. It works great. You can rub off any excess with a paper towel for clean marks.
@3DPrintsBuilds 2 жыл бұрын
Thank you for the idea. I will try it someday.
@tlocke0259 2 жыл бұрын
What settings did you have to change on that first print? I’ve had that problem with one of my printers and don’t know how to fix it.
@3DPrintsBuilds 2 жыл бұрын
I changed line width from 0.3 to 0.4mm
@robinferdinando4038 2 жыл бұрын
Awesome video and content 👌 what does R. F on the oil wrench mean?
@3DPrintsBuilds 2 жыл бұрын
Thanks! The R. F. are the initials of the designer. Rusty_Fly
@Priceman5 2 жыл бұрын
Do you have your print settings displayed anywhere? I just got a ender, and my prints never come out looking that nice.
@3DPrintsBuilds 2 жыл бұрын
Cura profile for Ender 3 V2: www.mediafire.com/file/sxlrfx1jiebkcif/Ender_V2_Basic_settings.curaprofile/file
@kotsioschristou8472 2 жыл бұрын
what cura settings are you using for those clean prints?
@3DPrintsBuilds 2 жыл бұрын
I have different settings for different prints, but I can share my basic Ender v2 PLA profile: bit.ly/2Zg40Ff
@styxx0500 2 жыл бұрын
It's more expensive to make these than it is to buy ones that are readily available on Amazon lol
@pcerano742 3 ай бұрын
Lol. Most of these prints probably cost less than $1.50.
@styxx0500 3 ай бұрын
@@pcerano742 and yet, they aren't even worth $1.00 🤣
@psdmaniac 2 жыл бұрын
Only spacer and bolts measure tool are useful. The rest are good only in collecting a dust or filling recycle bin.
@carlosgroes8573 2 жыл бұрын
The nr10 yellow bolt and nut sorter.. you got a link? For the file
@3DPrintsBuilds 2 жыл бұрын
Link in the description.
@imaker3183 2 жыл бұрын
Привет а ты не печатал корректоры в фары для е39. Спс если есть стл скинь плиз. Удачи
@ElecTechie 2 жыл бұрын
Nice .. Can I have the wood burner link and permanent marker link?
@3DPrintsBuilds 2 жыл бұрын
Wood burner: s.zbanx.com/r/0oD7Tzj2iDwR Permanent marker: euro-industry.com/main.php?index=details&cat=8&prod=23201550&lang=de
@mateusztokarski7553 2 жыл бұрын
I have the same problem witch my 3d prints that you in first print. What did settings you change.
@3DPrintsBuilds 2 жыл бұрын
Changed line width back to 0.4mm
@jonathanpaz5453 2 жыл бұрын
What did you applied to the spring?
@3DPrintsBuilds 2 жыл бұрын
I applied grease.
@tbm7301 2 жыл бұрын
i saw that 3d guns folder, can't stop the signal.
@3DJapan 2 жыл бұрын
Whipping that blade around was freaking me out.
@vickys9191 2 жыл бұрын
Print = 'auxiliary handle' for drill machine.
@markschweitzer6920 2 жыл бұрын
Why would I go through the tedious task of making that brush when I could do the same job with a cheap 25-cent chip brush?
@Kevin-wy8kc 2 жыл бұрын
amd why didnt you loosen the oil filter cap that fit perfectly?
@alexistaboada5759 2 жыл бұрын
Bc the tool would have disintegrated with any amount of load
@Ghazkul666 2 жыл бұрын
You have a typo in your ad, the word you want is "stuff" not staff
@S.... 2 жыл бұрын
Nr. 1 Trim/Clip popper - what filament is it, please?
@3DPrintsBuilds 2 жыл бұрын
PLA
@S.... 2 жыл бұрын
@@3DPrintsBuilds Dude.. what brand / color? xD
@3DPrintsBuilds 2 жыл бұрын
@@S.... Gembird Gold Metal PLA
@johnschroeder6351 2 жыл бұрын
I will have to get my printer set up so I can utilise it better.
@granul555 2 жыл бұрын
Hi. Which slicer do you use?
@3DPrintsBuilds 2 жыл бұрын
Cura
@granul555 2 жыл бұрын
@@3DPrintsBuilds How did you get the numbers printed on top? They look bad to me when printed.
@3DPrintsBuilds 2 жыл бұрын
@@granul555 Look over your print settings. Maybe you need to slower down or change layer height.
@granul555 2 жыл бұрын
@@3DPrintsBuilds Can you please share your Cura settings?
@3DPrintsBuilds 2 жыл бұрын
@@granul555 I use different settings with different prints and printers. Here is one of my Ender V2 settings: www.mediafire.com/file/v0l8ifqz7seiazs/Ender_v2_0.2mm.curaprofile/file
@user-fl5nm5uf9h 2 жыл бұрын
👍 👍 👍 👍
@ryanokeefe12 2 жыл бұрын
Lol... why did you glue the blade into you knife?
@makewithmegma 2 жыл бұрын
🔥💕👌👍
@bossmassful 2 жыл бұрын
Полезные инструменты? Ну уж линейку то можно купить в магазине. Как и почти всё остальное
@chibyshev 2 жыл бұрын
Игрушки и ее более того.
@dldgranite1931 2 жыл бұрын
Is everybody just that messed up every one of those things that I see I don’t have the design I don’t have the figure out the way to print it or make it I don’t have to buy the printing material to do it it’s already there all I Gotta do is go to the damn store and buy it and once I figure out the time spent and the printing material it’ll be about 75% cheaperIf I just go buy it
@andrewjackman8926 Жыл бұрын
Got a headache reading your comment. No punctuation?
@ErCapoAlex 2 жыл бұрын
Hii
@therealfocusin 2 жыл бұрын
Jump to 8:43 believe me, watch till the end. Don't waste your time like I did.
@rubino1988 2 жыл бұрын
If you have to use super glue on a removable part it's not convenient
@yomiyoo 2 жыл бұрын
Or maybe just buy a cutter and save the 6 hour of printing
@TsurinoDazuji 2 жыл бұрын
gdzie na stole kroisz.. matka by Ci zaraz pokazała ciachanie na stole
@3dcrazy332 2 жыл бұрын
☝️ I'm the first person to design "print in place" brooms and brushes about 8 years ago.
@dr.emmettbrown8466 2 жыл бұрын
Самоделки полная хуйня (с) Доктор Дью ((((
@unknownflyer90 2 жыл бұрын
Can't you spell?
@user-nq1lg5ww1c Жыл бұрын
Useless
@MrToufou54 2 жыл бұрын
Seriously ? What have you done here ? You are not the owner of designs, you just publish timelapses of your printer printing other guys work !
@warmesuppe 2 жыл бұрын
Where does he/she claim that?
@LoreLibrary-Official 2 жыл бұрын
Where do they claim its theirs
@brandielee7971 2 жыл бұрын
They don't claim the designs are theirs, and they link the the stuff. It's just to make people aware of the files
@MrToufou54 2 жыл бұрын
So, yes everybody, but where are the credits (in the video) ??? Where is the creativity ? What does this video give more than a search on stl search engines ? I'm just saying that there is no work on this video... I'm here for having more that just that I could by myself
@LoreLibrary-Official 2 жыл бұрын
@@MrToufou54 yes u can do it yourself..this just show to people that these file exist..the maker of the file allot them to do this cuz its freeeeeeeeee
@WoodenCreationz 2 жыл бұрын
I need one of those Faker ꓘnifes.... lol Thanks for the share.. Just stumbled upon your channel!!!
TimWelds
Рет қаралды 54 М.
Cord & Wire
Рет қаралды 4,8 МЛН