1000 Feet of Denim and 20 Gallons of Epoxy

Рет қаралды 8,018,364

Күн бұрын

Trying to make a table from denim and epoxy...
Blacktail Studio Apparel: blacktailstudioshop.com/pages...
My Epoxy Table Guidebook: blacktailstudioshop.com/pages...
My Epoxy Workshop: blacktailstudioshop.com/pages...
N3 Nano Finishing: n3nano.com/
Interested in commissioning a denim table? www.blacktailstudio.com/shop/...
Leather work by: / shaheenseiffert
Denim sunglasses: mosevic.com/
Items used in this video:
New Blacktail n3 Nano: n3nano.com/
The Wishbone Table Leg Jig: www.blacktailstudio.com/wishb...
Deep Pour Epoxy: www.blacktailstudio.com/deep-...
Track Saw (smaller): www.blacktailstudio.com/track...
Miter Saw Hold Down: www.blacktailstudio.com/miter...
Rotex 150 Sander: www.blacktailstudio.com/rotex...
Buffing Compound: www.blacktailstudio.com/buffi...
Dewalt Buffer: www.blacktailstudio.com/dewal...
Buffing Pad Spur: www.blacktailstudio.com/buffi...
Light Bar: www.blacktailstudio.com/light...
Respirator helmet: www.blacktailstudio.com/power...
Scraper: www.blacktailstudio.com/scraper
Threaded Inserts: www.blacktailstudio.com/threa...
Air scrubber: www.blacktailstudio.com/air-s...
Renner topcoat: www.blacktailstudio.com/renne...
Brass outlets: www.blacktailstudio.com/junip...
00:00 Introduction
01:16 How much denim?
01:55 This much denim
02:53 Epoxy prep
03:58 First sheet of denim
05:26 Epoxy problems
07:08 Last sheet of denim
08:13 Epoxy spill
09:25 Epoxy cleanup
10:27 Building table legs
13:22 Leather stitching
14:10 Planing denim
15:03 Giving the table away
16:49 Ran out of epoxy
18:19 How to make an epoxy table
19:13 Brass outlets
21:45 Sanding denim
23:11 Finishing denim
25:34 Polishing denim
26:33 Table leg delivery
27:24 Giveaway/reveal

Пікірлер: 25 000

@BlacktailStudio 10 ай бұрын

As, always, thanks so much for watching and supporting my channel! If you'd like to get in on the first run of shirts, here's a link: blacktailstudioshop.com/pages/merch-drop

@kinskifilms 10 ай бұрын

Oh wow, Jay Leno is one of your clients?

@Mr_i_o 10 ай бұрын

Your editor was right, I did really appreciate the clean up, especially the fact that even a bit of dust can ruin epoxy.

@Joshua_Lambert 10 ай бұрын

Thanks for the video, good work like always. You could have linked Mosevic in your description tho 🤔

@BlacktailStudio 10 ай бұрын

@@Joshua_Lambert Good call, done.

@Mr_i_o 10 ай бұрын

Also, please show us your sample process, ie the experimentation. I'm curious about the numbers, like how many variations of recipes or processes did you try? I'd watch a 3 part series on that, if it doesn't already exist.

@boomstyk4urboo 10 ай бұрын

The camera guy is the real mvp. "Can't you just buy denim?" 😂 just imagine the cost had you done this in Levi's.

@Blitzkrieg_69 10 ай бұрын

Next video idea

@sonnyjs15 10 ай бұрын

@@Blitzkrieg_69 2nd

@BlacktailStudio 10 ай бұрын

Pays for himself every week.

@dallasgearsgodpettman1941 10 ай бұрын

I like how this channel went from a very elegant wood working channel to the most chaotic shit you’ve seen in the woodworking community Difference between you and John malecki is he’s most likely coked up with the shit he pulls😂but you’re most likely breathing in that Portland air just got you messed up.

@MCsCreations 10 ай бұрын

Mvp?

@DOITWITHDAN 10 ай бұрын

The Jable turned out great! The "Cant you just buy denim?" killed me lmao

@MikeJovani 10 ай бұрын

Was about to like this comment but it's at 69 rn. Nice...

@Johblade101 10 ай бұрын

Jable has a catchy ring to it

@J-Peterson777 10 ай бұрын

I thought your autocorrect had accidentally kicked in, but Jable is a great name for this project. You should copyright it quick and then get Cam to trade it off you in return for a free Jable...😄

@charlesm.8807 10 ай бұрын

Dan!

@Official.M0nster_Soul 10 ай бұрын

All that's missing is the Jairs and other jurniture

@LauraMe... 3 ай бұрын

I do not know how your video popped up in my account, but as a crafter, sewer, and thrifty recycler... I watched every second! This process was so fascinating. And the results?! Just incredible. If you want to use the pants think smaller, end tables, coffee tables, maybe some modernist designs with curves and skinny legs. BRASS WAS GENIUS whether intentional or not, the brass mimics the studs in making of genes, and your brass outlets were just cherries on the dessert❣ and the leather is also a nod the the jeans lifestyle. All thats left is to get leather tags embossed with your branding to put your claim to these art pieces. You are absolutely on to something. And you can add design elements with your colored epoxy like rhinestones. ❤❤❤

@InfiNoob 3 ай бұрын

I am the same. I'm not sure how I got here, but I'm glad I did. That end result was incredible! Amazing choices all around! As for my favorite brand of jeans, I'm not sure I have one. I can't remember the last time I got consecutive pairs from the same brand.

@c.carroll5635 4 ай бұрын

The denim, leather, brass combo table is an instant classic and would fit in almost any casual space. I love the fact that the denim slab could be used as stock to make parts. I can see people using it for automotive trim pieces, gun stocks and grips and even jewelery. And you haven’t even scratched the surface of different colors or tie dyed denim.

@That_Stealth_Guy 10 ай бұрын

He deserved that table 100%. Talk about a humble man. I don't know if I like the idea of using denim, or his leather wrapping skills more! Kudos to both of you for making an amazing desk!

@alexanderturl 10 ай бұрын

Phenomenal project mate, and deserving recipient.

@Sequesterer 10 ай бұрын

I agree. Well deserved! And a nice gesture.

@shaheenseiffert 10 ай бұрын

Thank you guys so much!

@hibahprice6887 10 ай бұрын

The main thing is that he likes it. I love this table, but I don't have space for two or more tables at home, if I had to choose, I would choose wood. This table lacks depth, something like 3D milling at a depth of 8/10, in the shape of the same jeans, with some interesting ragged relief (so that all layers can be seen) then poured with super transparent resin. Because now the table looks like it's fiberboard laminated with a single layer of denim, it doesn't feel like it's made entirely of denim.

@TheThreekeys 18 күн бұрын

“Picasso was a terrible wood worker.”🤣🤣🤣🤣🤣🤣🤣

@schuylermontgomery3396 10 ай бұрын

Awesome project! Since you asked for suggestions-as an aerospace engineer, my mind jumps to vacuum infusion. It’s a pretty common technique in aircraft manufacturing, and one of the big benefits is you can completely avoid the mess of epoxy. You would basically put the whole denim stack in a sealed bag with some “flow media” as the top layer. Then you pull vacuum on the bag on one side and allow your epoxy to flow in through the other side. Once it’s fully infused, you let it cure under vacuum. Then you can peel the bag off it and ideally you have a perfect denim layup with no mess. Hope this helps!

@jonbourgeois8390 10 ай бұрын

I've heard of that. It's how carbon fiber is made. Yes, it would probably work brilliantly!

@goddess_bree 10 ай бұрын

I've seen the vacuum bag method work as a means to make micarta successfully before, using various materials and both glue and epoxy, so this would be great at a much larger scale like this desk.

@Zero.0ne. 10 ай бұрын

Infusion could have made this an easy one day project.

@isaacbrandt7345 10 ай бұрын

Bruh that’s genius 😂

@nutsmcflurry3737 10 ай бұрын

And not expensive to set up

@hermes3386 3 ай бұрын

Frankly speaking, I'm actually full of admiration for people like you who dare anything just to produce something innovative. What energy required... and what talent it takes !

@sjgrabowski 4 ай бұрын

Wrangler - Denim Phase, yes! Love that you honor the artistic tradition. Original paintings in artist original frames, sculptures on bases, table tops on legs. May you continue to find new ways to elevate the craft and artistry!

@colbydobransky530 10 ай бұрын

"Picasso was a horrible woodworker." 😂😂😂 Fantastic work as always. Love the denim and brass look.

@fishbonetrunk6645 5 ай бұрын

As a textile designer this would be smart for textile waste, many textile factories give the waste fabrics for free. Smaller pieces like nightstand tops for smaller pieces, you could use printed fabrics too. It's a interesting idea to use old curtains that fall apart as a table would look awesome.

@LuQiYun 5 ай бұрын

Yeah, agree. That way we would also save more tree for being used as furniture.

@Exknight2 4 ай бұрын

@@LuQiYun Trees regrow (through saplings) within years, deforestation is the problem, the moment a tree is cut it frees up the sky for another tree to take the sunlight and then it's a race about which sapling tree grows faster to take the spot.

@mfbfreak 4 ай бұрын

I think you could definitely industrially make it a useful process. Think about the Trabant body panel production, except with epoxy instead of phenolic resin - and with manually laid out strips of denim instead of shredded fuzz.

@LuQiYun 4 ай бұрын

@@Exknight2 but the fact is nowadays human cut more trees than needed, lot of forest gone.

@JJ-iu5hl 4 ай бұрын

That's why he said deforestation is the problem. That's the complete removal of forest. Cutting down trees to use for limber and paper is usually not bad. They don't kill the entire landscape. They just take the mature trees, which, like he said, allows saplings to mature.

@rupalikumar2021 4 ай бұрын

Honestly, this is so dope! I think this is the first piece of furniture I was moved by. No just the efforts but the deisgn, the wishbone legs, the color contrast of denim with brown leather, the crafstmanship! Just reallyyyy amazing!

@erinaltstadt4234 3 ай бұрын

The ending was so cute. It was really sweet of you to give him the table.

@Taxic89 10 ай бұрын

Honestly, this kind of falls into the art category. It's super unique, and kinda wacky, but also reserved and beautiful. This is the kind of stuff that's puts you in future art history and design classes dude. Well done.

@elvis4182 10 ай бұрын

This is past "kind of art" it is art, I think he can charge more if you can't afford art at least you can watch it being created for free

@SoulDelSol 10 ай бұрын

Take that picasso!

@error.418 10 ай бұрын

lol wat

@monicac.6941 10 ай бұрын

American eagle denim ….. love love love your table!!! It’s truly a work of art! The leather legs fit it like a great pair of boots… so kind of you to gift it like that! Can’t wait to see what else you come up with!

@ruthrausch5237 8 ай бұрын

I'm an old (87) lady that loves to watch you create! I love the look of denim for the table. It gave me the idea of making denim coasters. I got too old to sell my resin items at craft shows, so I give it all away. I think you are a great artist!

@susanwhittaker865 7 ай бұрын

Denim coasters ! Great idea. Could just use a roller to squeeze the Epoxy out. Genius.

@errata 7 ай бұрын

What a lovely comment from a lovely woman

@marciakessler1911 7 ай бұрын

Perfect idea for a smaller scale project for the rest of us!! Great for Christmas & birthdays! ❤from KS.

@RazorStrap 6 ай бұрын

Denim wall clock ???

@IsrebaWheeler 6 ай бұрын

that's a great idea... denim coasters. please let me know if you're serious about this project. I'd love denim coasters

@snkolson 3 ай бұрын

That Denim looked absolutely beautiful after it came out of the planner. My vote is you do one like that next as a set of coffee table. Great work and as always very inspiring

@Cowgirl77Hikes 2 ай бұрын

I love that you push the envelope and just go with your vision - Gives the rest of us artists the courage to try. Beautiful work.

@J-Peterson777 10 ай бұрын

LEVIS... I am absolutely speechless on so many fronts. Firstly, you tried something totally new and really struggled with it, but eventually created a masterpiece. Secondly you collaborated with an absolute artist (perfectionist) not unlike like yourself. Thirdly, you rewarded him with the gift of the work of art that you both created together. I am embarrassed that all I can do to support you is subscribing to your channel and commenting on every video of yours that I see. You are a craftsman, a gentleman and a great human being. I salute you.

@BlacktailStudio 10 ай бұрын

More than enough John, thanks for the support!

@mrgt89 10 ай бұрын

Honestly appreciate how genuine you are about feeling like you’ve messed up. As someone just starting out in woodworking it often feels like everyone on KZfaq is making masterpieces and you’re the only one making mistakes. Thank you

@BlacktailStudio 10 ай бұрын

Where’s the fun in a project that goes smoothly??

@energyvampire1672 10 ай бұрын

@@BlacktailStudio Yes I've only every learned from my mistakes so people aren't willing to show their mistakes.

@glittalogik 10 ай бұрын

@@BlacktailStudio It might be fun, I wouldn't know 😅

@denisegaylord382 10 ай бұрын

@@BlacktailStudio if it goes smoothly, know that somewhere there will be a huge hiccup...😅

@goodorusty 10 ай бұрын

I haven't done much woodworking yet but I understand how you feel not only with that but with any art I've done.

@jennifergaskins1092 4 ай бұрын

This was my first video I've ever seen of yours...this piece is truly one of THE most STUNNING pieces of craftsmanship between two artists!!! If I could afford to purchase a work of art like that for my home...I would be HONORED and BLESSED to have that piece in my home!!

@QueenofMarine 7 күн бұрын

That table was so beautiful! And it was a very sweet and thoughtful thing to surprise him with it. Too bad he didn't even say thank you or "I love it" or a single nice thing about the amazing table he was being gifted. He didn't seem excited in the slightest. It was as if someone brought him a Snickers back from the gas station. Maybe I'm missing something about his personality, but that complete lack of gratitude really bummed me out.

@emanueladadarlat3159 5 ай бұрын

Honestly, I'm not necessarily a denim enthusiast (for things other than jeans), so I was quite skeptical going into the video. I'm blown away of how much I like it. And the stitching on those legs .....wow, such craftsmanship from you both.

@Carpetcleanerman 10 ай бұрын

In my humble opinion this is your best piece yet. The whole premise of it, the journey, the heartbreak, turning the corner and then giving it to Shaneen... Awesome!!!

@ArtyBicardi 4 ай бұрын

This is beyond CRAZY!!! Every single little detail and over all is super unique and looks amazing!

@aarontonn6273 2 ай бұрын

It was on this piece that I realized why I liked you and subscribed immediately finding you 4 yrs ago. Aside from your awesome talent you're authentic in every aspect. This is genuinely you, no script or filter... LoL I appreciate you and your gifts to all of us. 🙏

@Thomasfrank 10 ай бұрын

You could start a whole channel just for scraping epoxy off stuff, so satisfying to watch 😄

@PeterPan-tb2ju 10 ай бұрын

@thomasfrank Why did you discountinue making videos? :(

@Thomasfrank 10 ай бұрын

@@PeterPan-tb2ju still making videos here! www.youtube.com/@thomasfrankexplains 4 new videos currently in production on the main channel too. Just went on a long side-quest 😁

@goosenotmaverick1156 10 ай бұрын

@@Thomasfrankgotta love a good side quest 😎

@danielstarnes7354 10 ай бұрын

Awesome build. For a great mold release, spray the table lightly with scotch photo mount (not super 77) then cover with aluminum foil and build up glass/ resin from there. Foil stays stuck to resin but the whole mess will come right off the table.

@brandsthatcreatelitter1648 9 ай бұрын

and where is that scraped off epoxy now?

@endar117 10 ай бұрын

Blacktail Studio is my favourite brand of denim now. Seriously though, this is one of my all time fav projects you've made. So cool looking.

@Docv10 10 ай бұрын

Should we call it blacktail denim ?😂

@danielrichardel6356 10 ай бұрын

I love it

@BlacktailStudio 10 ай бұрын

Appreciate that bud 👊

@kappagrapes 3 ай бұрын

It's prettty neat how the epoxy goes in clear and comes out blue from the colour of the denim! Also neat how chipping it all off the floor seems to have cleaned your floor. World's most expensive mop right there.

@Sufficient4UsIsAllah Ай бұрын

Absolutely stunning! The leather legs and brass ‘buttons’ are genius.

@schlenbea 10 ай бұрын

I don't have a favorite brand of denim but if I had to choose, I'd go with this table. Absolutely stunning result!

@aerball 10 ай бұрын

You cant wear a table, what are you NUTS!?

@schlenbea 10 ай бұрын

@@aerball wearing tables.. it's cutting edge fashion 😁

@craigiedema1707 10 ай бұрын

Those brass fittings on the top of the desk are just perfect. They look like buttons on a pair of jeans and tie the whole theme together. Great result.

@bookworm1052 7 күн бұрын

I have never been so fascinated watching a video about a table being built.

@marlenasmith4147 4 ай бұрын

I love light wash denim! The table was amazing! I've never seen anything like it. I love all things resin and epoxy. So watching how you put that table together was awesome! Thank you!

@jgrimmier 10 ай бұрын

I like grey denim, so I’d love to see a desk in that shade. This desk is amazing, and the warm/cool colour contrast is perfect. More denim projects please!

@BlacktailStudio 10 ай бұрын

Wearing gray denim at this moment!

@jodilea144 10 ай бұрын

Oooohhh, I love that idea too!

@killerkitkats6783 10 ай бұрын

Grey denim is the best denim or black

@jonathanporter5223 10 ай бұрын

Yo honestly, the denim table came out looking real proper. The leather wrapped legs are tight and flawless. Also, using brass hardware/components and recessing them to fit flush was the icing on the cake. For real, that is a one of a kind badass looking table.

@MartyKane217 2 ай бұрын

The blue denim, brown leather and bright brass is an absolutely beautiful combination. This turned out amazing. Kudos for giving away the desk too, that is super cool

@91pielage Ай бұрын

My favorite brand? Whatever denim is on sale and in my size at Walmart or Meijer. Jeans are meant for ripping and replacing. Thank you for the inspiration in showing your audience it's okay to color outside of the lines, and that keeping your cool in the face of what some would call "a disaster" is absolutely possible. Stunning work as always!

@JH-uu7jl 9 ай бұрын

"Picasso was a horrible woodworker" is my new favorite punchline. Great project. It turned out so nice. Love the visual texture. Glad your leather partner liked it and that his wife liked it too!

@alexisspence5611 10 ай бұрын

This is definitely one of the coolest projects I’ve seen. The leather wrapped legs were a perfect complement to the desk.

@kinexpro 10 ай бұрын

@Old Salty The edges would be super obvious that that is how it was done. You could do that, yes, but the end result would be quite different.

@patsyhale7288 2 ай бұрын

68 year old Nana that found your channel today and had to watch your denim desk. Omg just fell in love with it. Breath taking ❣️ ♥️♥️♥️

@markmunro 28 күн бұрын

It's official now. Not just a woodworker - an artist. Love your work,,,

@zachheinz9683 10 ай бұрын

I've watched every single one of your videos, almost twice over, and this might be my favorite piece yet. I love the contrast of the blue denim and the brown leather. Very unique. Bravo.

@haveblue117 3 ай бұрын

I have tried this on a very, very small scale and was astonished how difficult it was to soak the denim sufficiantly. So I am really amazed how well it turned out for you. Amazing piece of art indeed! 😍😍😍

@mysterycynic18 4 ай бұрын

This turned out amazing. The brass outlets look like big brass buttons as well, which fits the denim and leather look. It's like if your furniture was clothing. Super cool!

@winstonzeb2842 10 ай бұрын

This is very similar to fiberglass work! I think you’d have a lot of success with vacuum bags for the clamp up. That would also be a simple way to start making non-flat forms/molds to layup curved shapes. You could also get some biaxial fiberglass and work that into the layers to get thinner parts that have structural strength. I’m excited to see what you do on this new path, there’s certainly a lot of opportunities!

@davidanalyst671 10 ай бұрын

i was thinking carbon fiber but yeah

@InsufficientGravitas 10 ай бұрын

Its basically the same kinda material, a fiberous weave held to gether with a resin, pretty similar to carbon fiber too. You could probably try and imitate the construction metods used in making composits, but I fear denim may be too thick to paint the resin on and have it properly soak through the fibers.

@nikosfil 10 ай бұрын

I also was thinking how windsurfing boards are made. He could check videos with the process.

@bgdavisX 10 ай бұрын

True. I would lay it out, pour the epoxy then use a fiberglass roller to get the excess out. You could skip the hand wringing and reduce the mess.

@Thinkle911 10 ай бұрын

Well, i guess technically it is exactly the same as working with fiberglass. The body of the infamous Trabant car from the communistic regime German Democratic Republic was made like this table: cotton cloth soaked in resin laminated into shapes. it does not depend so much on the fiber you are using, the working technics are mostly the same. Technically you coud also cheat and laminate the denim over a lighter weight, but robust core to safe work, time and money on resin and denim and avoid emissions by wasting ressources. maybe it wouldn't feel right, but in the end noone would ever care, even, if you tell them.

@RobertRedland 10 ай бұрын

I'm a carpenter and avid wood worker. Yet ... (I can't believe I'm saying this) I think this is one of my favorite projects you've done. Turned out amazing. Keep making👍

@mariusbordan6016 28 күн бұрын

Every time I watch one of you videos I’ll say, this is the best one so far, and when I watch the next video that will be the best one. What I’m trying to say is that I can watch your videos and I love every minute of them. Great projects, lots of knowledge. You are a true artist

@pirateforlifecreations6726 27 күн бұрын

I love watching you work. You have a great way of explaining yourself while going through your process. Thanks for filming.

@dougidoug 10 ай бұрын

The table looks fantastic and you did an amazing job on it. Giving it away to the guy was such a great thing to do. He looked really pleased with it.

@TheParsco 10 ай бұрын

That’s a Persian culture, we borne to please others 🙏🙏

@jasonwhitaker2726 10 ай бұрын

What I absolutely love about your videos..... you don't hold back at showing failure/mistakes!! So many YT'ers put out these polished videos that make everything they do look as if it were perfect. You are willing to share the ups and DOWNS which makes it so much more real. Thank you!

@BlacktailStudio 10 ай бұрын

Where’s the fun in that?? And thanks Jason!

@venedar 10 ай бұрын

100% agree.

@Forbiddina 10 ай бұрын

⁠@@BlacktailStudio keeping the mistakes is real, relatable and a fun part of doing a project is the innovation to work around limitations. If you haven’t had an issue on a project, you haven’t done enough projects. Very true for me working on my cars. Not having the right specialist tool or a bolt snapping or being seized etc. But I come out more experienced for it and don’t make the same mistakes again.

@hampyonce 10 ай бұрын

Great outcome. Levi's guy. I was worried there in the midst...

@ItsMe-so4nd 10 ай бұрын

I agree, his video's are more real and raw when it comes to mistakes on some of the projects he builds. Its more relatable and more personal when you see him try to deal with the mistakes that pop up. also you get more of a genuine vibe from him all together because he doesnt hold back on some of the problems that may occur.

@carolinelitton5804 3 ай бұрын

I love watching your projects, love, love, love the denim desk!!! You are a very talented artist!!!

@kaveac 4 ай бұрын

Wow! That is unreal. That desk is absolutely stunning … top to bottom.

@VeganSmasher 10 ай бұрын

As a leather worker and lover of denim and brass, this is my favorite project you’ve done. Amazing job!

@shevaunhandley1543 10 ай бұрын

I don't have a favourite brand, but as a sewist, I love love love this concept for a sewing table! Every component just makes absolute sense. I hope you make more of these!

@KrissyChacon 3 ай бұрын

I love all denim. I collect my friends' old torn jeans and use those to create things. I just made my sister a messenger bag for school completely out of light wash, medium wash, and grey dyed denim and she is absolutely in love. I love the look and feel of denim and I love working with it. Denim is such a cool medium to work with.

@nathanlambert1502 2 ай бұрын

I’m in love with this table, everything from the blue to the brass finishings and those table legs look amazing ❤️

@CharlotteMariesVoice 6 ай бұрын

Levi. Not only was this an amazing project, it was an incredible demonstration of selflessness, commitment, and compassion. I never expected to have tears watching a "How I made..." KZfaq Video. I am blown away by your craftsmanship, dedication to the project, and your generosity which was only exceeded by Sheeren's generosity. You Guys are the Best!

@augeniasestokaite4674 6 ай бұрын

Completely agree!!!🤗

@jinsehan 5 ай бұрын

Good job

@SyenPie 5 ай бұрын

LMFAOOO the fact his actual name is "Levi" makes this video 1000x greater edit: nvm i just finished the video and im a dumbass 💀

@Rick-the-Swift 5 ай бұрын

I love charity work myself, but would it have not been more generous for him to just use a slab of oak for the core, since it would never be seen again after a layer of denim went over it, and then he could have donated that $2000 dollars or so worth of epoxy and denim to like 100 other craftsmen to make cool projects with? Imagine how depleted our natural resources would be if everyone were as wasteful as this when it came to hobby crafts. Geesh wow, still smh in agony over this. What's next, making an engine that uses solid gold pistons to be put inside a Honda Civic?? Oh nvm, I'm afraid if he reads that suggestion he may actually try to do it🤦‍♂

@SyenPie 5 ай бұрын

@@Rick-the-Swift I was also wondering why he bought sooo much denim that essentially could’ve been literally any material since it would never be seen haha. Then again, it’s precisely because the entire table is literally denim that the project seems even more epic

@Rooz31 10 ай бұрын

This is one of my favourite pieces you’ve made. I never would have thought it. Superb job mate.

@lellgray3168 3 ай бұрын

INC jeans. I was mesmerized by you constructing this denim desk. I thought it was awesome when you realized the enormity of the project but you kept going. It turned out amazing! You are an amazing artist!

@amandalloyd3581 3 ай бұрын

Dark denim- I love the continuing despite the crazy cost increase, the integrity of using every layer denim and the brown stitched leather. The use of brass also kept true to the denim. Exceptional design. Good call on giving it to a co-crafter. Wirth fully watching and relatable.

@bradleythompson6338 10 ай бұрын

I don’t have a favorite brand of denim but that Picasso joke I actually laughed out loud at. Also, your relationship with your videographer is awesome. Also, giving the desk where you did was the perfect move and the whole process from the nightmare starting to the beautiful end product was a delight.

@TURBONERD 10 ай бұрын

I'm actually stunned at how incredibly well the texture and finish compliment each other. Wonderful piece.

@BlacktailStudio 10 ай бұрын

You and me both!

@zenrockgardens 3 ай бұрын

This table is one of the most beautiful, unique pieces I think I have ever seen. I am so glad you gave it to the guy that made the legs. Which, by the way, I loved those leather covered legs, loved them.

@bernadettedean9764 3 ай бұрын

What an amazing project. I’ve always had a love of denim, and this project just really made me happy.!

@karonmcgregor4753 10 ай бұрын

Absolutely stunning. Two master craftsmen combining their talents to create a one of a kind piece. You guys need to collab more!!

@lunalaw3858 10 ай бұрын

fun fact- The material you made is called micarta. It was originally developed as a lightweight electrical insulator, however it is most often seen on knife handles. it is especially popular on camping and EDC knives due to it's waterproof properties and the fact that it'll develop a patina as it ages.

@harlequintheserpent7016 10 ай бұрын

Also, the most common term for this family of materials is the humble textolite))

@cletusclem8758 10 ай бұрын

I made a couple subwoofer enclosures out of MDF and wrapped them in a black burlap micarta. Such a versatile process. Durable, looked good and fairly easy.

@mitchstilborn 10 ай бұрын

Oh jeez, I’m embarrassed; at the number of knife making videos I’ve watched over the years and never clued in watching this one that dude’s making micarta haha

@BSworldX 3 ай бұрын

Man it's came out absolutely gorgeous. If I had a table like that, I would just look at it like a beautiful art peace. To me it's the most beautiful thing you done.

@alicer-w878 5 күн бұрын

Next time you make this, I would make a 3 sided mold to stop your resin leaking on the ground. And just have an opening where you have your resin container to catch to excess resin. I would make the sides low so you can still clamp your fabric together. The table is beautiful. I would love something like that. Great job!

@johngreen3998 10 ай бұрын

I have watched many of your projects, but this has to be my favourite. You are to be admired for conceiving the project and carrying it through, notwithstanding the trials along the way. And it is truly unique- the brass fittings and leather legs are a perfect match. Perhaps the most wonderful feature was your decision to gift the finished product to the leather craftsman. Well done!

@AcademicOrientation 10 ай бұрын

Shaheen stole the show.

@RizzyGibbler 10 ай бұрын

my fav 2

@johnjones-bv5df 10 ай бұрын

That was absolutely beautiful. I’m stunned how well it turned out. And giving it to the upholstery guy was a first class act.

@Webby123 Ай бұрын

It’s 2:30 AM and I had to leave a comment on your jeans table. I love watching your videos because you’re honest about any mistakes or screw ups, and I always can’t wait till the end because you always make beautiful stuff. I felt so bad for you when you’re going through the process, definitely worth it though. Thank you.

@leannkennedy6568 3 ай бұрын

Levi's. This table is fantastic. It has the perfect blend of color, material, and texture. Great job❣️

@vcuteverything 10 ай бұрын

This was so beautiful! I thought a denim desk was going to look tacky but wow! The depth to the colours looks amazing. Even if it isn't "perfect", it is definitely a piece of art.

@AdriansHabits 10 ай бұрын

Hey BlackTail! What about laying all the sheets into a vacuum sealed bag? Almost like how they work carbon fiber. Loved the finished product :)

@212superdude212 10 ай бұрын

with the amount of epoxy that was leaking out of that thing, im not sure youd be able to get the pressure needed to hold it without sucking liquid epoxy into your vacuum

@apt40444 10 ай бұрын

100%. Used to build fiber glass/carbon fiber boats. Vacuum infusion would be the way to go. It’s a bit of a finicky process, but probably worth the setup. Alternatively, lots of good tutorials on hand laminating sheets. This is essentially fiber glass layup work. We talked quite a bit about making tables out of regular fabric in the shop, considering we had all the gear to do it.

@BlacktailStudio 10 ай бұрын

ya, I've been experimenting with that a bit since this project actually. Just cant have as much epoxy squeeze out as this piece or it'll get sucked into the vac.

@apt40444 10 ай бұрын

We used to vacuum infuse carbon fiber sheet on a sliding glass door - Apply mold release to the door, lay down your fabric (worked up to 1”+ thick), peel ply, resin/vacuum lines, vacuum bag. Suck it down, introduce the resin, let it cure. No mess, and using glass ensured the surface finish was excellent.

@rpmrpmtube 10 ай бұрын

You can just get a bag to put in your vacuum then buy a tube you can just throw away after

@beautyfulsutton8985 2 ай бұрын

Light dark and black denim I love this honestly my favorite out of all your designs ❤❤❤

@chrisfarrell8399 3 ай бұрын

Levi 501. Absolutely stunning!! So glad you’re offering another option for your workshop 😊

@lisahaapaoja3838 10 ай бұрын

You are an ARTIST. Period. There’s no right or wrong, there’s just an artist and his art. Your craftsmanship combined with your intuition and creativity is a gift so many people wish they had and just don’t. Bravo!

@Nazemi96 10 ай бұрын

yep.

@lauig 10 ай бұрын

Loved that picasso joke almost as much as i loved to see his genuine reaction and his immediate thought to his wife directly after that. Seems to me you gave away a table, but you earned a friend for life there. Power of kindness at its best. (Also, that end result was sooo neat can't wait to see what you do next with that micarta, that finish is stunning !)

@marktr53 Ай бұрын

WOW!!!!! Awesomeness! I love denim......my favorite, Levi 501's. What an honor to receive such an incredible table!

@nancyosullivan719 3 күн бұрын

Your finished product is astounding! What a trip, and what an imagination you have. Keep up the good work! Thanks.

@snowy2550 10 ай бұрын

I hope I'm not the only person who has noticed that one of the best things about your videos is your honesty. I know personally that there are so many points in watching people do projects that I want to ask what they were thinking when they implemented something, or overlooked errors. Keep up the incredible work!

@MartyH 10 ай бұрын

Don't know if your a car guy, but another KZfaq channel I watch is Home Built by Jeff and he does the same, admits to his mistakes and it just makes a good watch.

@PrevailingFreedom 10 ай бұрын

Honesty? This table isn’t made entirely out of denim; he uses epoxy. So the title is clickbait and inaccurate

@Paradise-on-Earth 10 ай бұрын

@@PrevailingFreedom 😂😂😂

@dhowting 10 ай бұрын

COOLEST PIECE OF FURNITURE I'VE EVER SEEN!!! It's gorgeous! And imagine the conversations he'll have explaining that it's ACTUALLY 50 layers of material!! ❤

@Gnickz0r 6 күн бұрын

mate, you are an artist ...I love the fact that you have to know how to every situation, and even if you don't, you try out stuff until it works for you. 5 star artist

@nattycasper2022 4 ай бұрын

I was skeptical. Those legs really made it make sense in the end. Fantastic idea. Amazing craftsmanship by both of you.

@jennypatterson6660 10 ай бұрын

This is awesome! I would like to suggest you look at a Japanese process called "Mokume Gane" Basically you would layer your denim like you did here, but on the bottom use various sized wads of denim to create hills and valleys in the top design. It comes out looking like a topographical map.

@rufogallardo7168 10 ай бұрын

second this comment

@ng4847 10 ай бұрын

I third this recommendation 🫡🧐

@haydenemmink3833 10 ай бұрын

Definitely a good idea and I’d like to see him try it, although it probably wouldn’t end up as a super functional piece haha

@monkeyorchid4081 7 ай бұрын

I love it and the legs are so beautifully stitched honestly they are a work of art!

@curiousgeorge2792 7 ай бұрын

TRULY TURNED OUT BEAUTIFUL, didn’t they???? WOW WOW WOW!!!

@lawsnewton 6 күн бұрын

Love that table, ultimate computer desktop work surface!

@gradykindred6146 23 күн бұрын

it turned out so great that was a great looking desk and it was nice to give that leather worker the desk in the end.

@realbingus 10 ай бұрын

I don't really have a favorite brand of Denim. But this table actually looks way better than I expected, awesome job!

@ORSkie 10 ай бұрын

I know... I was thinking that I don't use denim, so apart from Levi's, I don't know any others, lol.

@sandybush1661 10 ай бұрын

Best laugh I've had all day - the feet sticking 🤣 The table turned out beautifully, and it was so generous to give it away. He did an awesome job on the leather on the legs also.

@hanreality.7266 10 ай бұрын

I was waiting for the bottom of his trainers to come off and stay in the resin!

@descent815 10 ай бұрын

The fact that somebody was doing the work for you just because they love the craft says a lot about that man. Both you guys did great work and I know that that table will be used a lot and it looks beautiful. Faded denim is my favorite.

@michelleb5729 3 ай бұрын

No way!!! Wow!! Such a piece of artwork Which also doubles as a table, especially love the layered look at the sides. Top job

@BikerDrum 2 ай бұрын

I hope you keep sharing as you go deeper into your "Demin Phase", can't wait to see where you take this style. Kudos for gifting that gentleman, nice to see two craftsman work together without economics prevailing.

@RustyShackleford53 10 ай бұрын

This isn't just a table it is pure art 10/10

@ampiegreeff3075 10 ай бұрын

To say I am horrible at working with wood is an understatement. I have never see epoxy in real life. However, I am drawn to your movies from a creative point of view. Not only is it satisfactory to see someone create something but what people can learn from your experience is astounding. And what a great person to share all this. What an amazing channel.....

@zentair 10 ай бұрын

reading the first sentence I thought this was a reply from that guy he insulted in the video, what was his name, of right, picasso. Picasso does not have a youtube channel. so not you. my bad.

@planetmarcus7305 2 ай бұрын

Your creativity blew my mind away! If I had lived in USA I certainly would order a desk like that. Genius! Love the twist at the end, that nice gentleman wasn't expecting your way of thanking him for his collaboration. Great ending! All the best for both of your businesses!

@ruthperez4514 3 ай бұрын

Yes, I want one! Went back & watched the video again and yes I still want one for my home office.

@MadeinPolandChannel 10 ай бұрын

I love the end result!

@victorodionov 10 ай бұрын

Very cool looking project and especially the result. As for squeezing the liquid epoxy - in my country we have an old school device for squeezing laundry. It's two long tubes/drums with a handle. Take a look at a "hand Clothes Wringer" may be it'll give an idea.

@Volt64bolt 10 ай бұрын

It’s just micarta but it’s still cool

@spulwasser 10 ай бұрын

@@victorodionov ah yes, the good old laundry mangle

@footballwizz692004 10 ай бұрын

This denim look is so stunning. I love that you show all of your mishaps as well. It's so refreshing to see someone real on KZfaq. I absolutely love your work.

@sickoftheshit 10 ай бұрын

Well said.

@hartmanartsource 3 ай бұрын

I don’t have a favorite brand of denim. This has given me some cool ideas about making pen blanks for turning from old textiles! I have a small lathe, and lots of scraps of fabric and scrapbook papers, so I’ll be doing some experimenting of my own!