1000 Horsepower on a Budget? And Rebuilding a Windsor 351

1000 Horsepower on a Budget? And Rebuilding a Windsor 351 - Engine Power S6, E3

Рет қаралды 373,184

Күн бұрын

There’s No Replacement for Displacement! The Windsor powerplant is getting stroked, plus can this offroad Big Block Chevy bullet make 1000 Horsepower?
PARTS USED IN THIS EPISODE:
Blueprint Engines: BluePrint Engines Pro Series Chevy 632 C.I.D. 815 HP Dressed Long Block Crate Engine
More Info: pntv.us/pn_pt_15352
Holley: Holley Sniper EFI Stealth 4500 Fuel Injection System
More Info: pntv.us/pn_pt_15320
Holley: MSD 8.5mm Super Conductor Spark Plug Wire Sets
More Info: pntv.us/pn_pt_15315
Permatex: Permatex The Right Stuff Gasket Maker
More Info: pntv.us/pn_pt_15316
Royal Purple: Royal Purple XPR Racing Motor Oil
More Info: pntv.us/pn_pt_15317
Summit Racing: AFR 385cc Magnum BBC Competition Racing Heads
More Info: pntv.us/pn_pt_15311
Summit Racing: ATI Super Damper Standard Harmonic Balancer
More Info: pntv.us/pn_pt_15312
Summit Racing: COMP Cams Sportsman Solid Roller Lifters
More Info: pntv.us/pn_pt_15313
Summit Racing: Jesel 2-Piece Upper Pulley Belt Drive System
More Info: pntv.us/pn_pt_15314
Summit Racing: Summit Racing® Wire Sleeve Installation Tool
More Info: pntv.us/pn_pt_15308
Eagle Specialty Products: Eagle Forged H-Beam Rods
MAHLE Aftermarket: Elite Sportsman Drag Racing Pistons
Matco Tools: 16v 3/8" Drive Impact Wrench MCL1638HPIWG
Matco Tools: MATCO Tools are the Official Tool Supplier to Engine Power
PowerTrain Products: 351W Long Block
Race-Gas.com: Race Gas & Race Gas Ultra
The Industrial Depot: Tools, Hardware, Shop Supplies

Пікірлер: 400

@PowerNationTV 4 жыл бұрын

We'll continue to post these episodes here on KZfaq. If you can't wait for the rest of the build, visit our site to binge-watch: www.powernationtv.com/shows/engine-power

@rjbradleyjr 4 жыл бұрын

Hi i would like to see a quadrajet carburetor 750 cfm vs a Holley carburetor cfm

@mrinterceptor7572 4 жыл бұрын

I would like to see y'all go all out on a 4.6 crown Vic engine

@Thelongmanable 4 жыл бұрын

PowerNation *_

@patloughner9551 4 жыл бұрын

Thanks for putting these on KZfaq!!!! I love these types on shows!!!!

@marksnider8914 3 жыл бұрын

Love it already.

@jamyers1971 4 жыл бұрын

I LOL every time I see the word "Budget" on one of y'all's videos.

@pjimmbojimmbo1990 4 жыл бұрын

Well if your Budget is $20,000+, I guess

@deanwaldron-bishop5635 4 жыл бұрын

That's why it has a question mark. The answer is no lol.

@luisaraya6989 4 жыл бұрын

$20K for a big block 1000 HP is low budget

@wayne12735 4 жыл бұрын

Budget to them is $12,000

@owowaudi 3 жыл бұрын

their loophole is that the word budget by itself doesn’t mean low cost. every project is on a budget. some are low budget, some are high budget

@swampratt36 4 жыл бұрын

Gingerly pry off intake manifold Proceeds to beat into submission 🤣 Love these budget for millionaire's builds 😜😳

@leoarc1061 4 жыл бұрын

Yes. When they open the hood, I can see everyone going "woooow... this must've cost you nothin! Everything was super cheap!!!"

@FordMaverickFanatic 4 жыл бұрын

Cheap, Good, Fast. Pick 2!

@jessemurray1757 4 жыл бұрын

considering the fact that the long block alone is 12 grand, not including the upgraded parts. they did for 1000 hp......yep, super cheap lol

@Backyardmech1 4 жыл бұрын

😂 Super cheap if you’ve got a black credit card and time on the toilet with a Summit catalogue. Fuck these shows. Just ads for catalog companies.

@zacharymartinez1814 4 жыл бұрын

1000 n/a horsepower for 16,000-18,000 ain't that bad.

@baddonkey6876 4 жыл бұрын

I love it, 1000 hp N/A on a teeny 75,000 budget 😐🤥🤥

@Shade_tree_garage01 Жыл бұрын

Where the hell did you get 75k? This is around 16k max

@tylerdurden6460 3 ай бұрын

I've watched people build motors for 35k and only be at 800 hp on a big block. 16k ain't so bad tbh, and any built is a budget build, just might be a larger budget than YOU have

@ckane510 3 жыл бұрын

I like how you show putting the engine together dryer than a popcorn fart.

@nbrowser 4 жыл бұрын

1,020Hp naturally aspirated...wow.

@StreetDisciple86 4 жыл бұрын

I absolutely love you guys at PowerNation, I could literally watch your videos all day! The best in the business!!

@ThaMetalMan Жыл бұрын

I feel the exact same way

@diegoroblez2328 4 жыл бұрын

Really wished you guys got more views! Nothing but positive knowledge is what I get from you guys, thanks for great videos!!!!

@lessharratt8719 4 жыл бұрын

I love how you say budget friendly. In a wet dream. I love it non the less.

@bingorobins1010 4 жыл бұрын

If I ever win the lotto I want this guy to build my motor.

@jaimecervantes3896 4 жыл бұрын

Ken Graham my brother from another mother I hope and pray that you hit the lottery 🙏

@theguy9234 4 жыл бұрын

Nah. He sucks.

@bingorobins1010 4 жыл бұрын

@@theguy9234 cool story

@spankthemonkey3437 4 жыл бұрын

Ken Graham I want the girl to work for me

@Ausblack 4 жыл бұрын

NRE would be better

@Tariq_F._Raheem86 4 жыл бұрын

Buys brand new crate 632 short block, just to gut it for the “budget build”. I guess by budget, they mean they didn’t order the billet block they could afford?

@Mrrockbucketman 2 жыл бұрын

I love watching Pat work!

@brianczeiner7627 4 жыл бұрын

I need their "budget".

@mchristr 4 жыл бұрын

Great info in this episode. I'll stay tuned for the 7 liter Windsor. Thanks for posting.

@1tuffzx10 4 жыл бұрын

Now you kno GM is always gonna get top billing, Ford is always an afterthought. Even when it's a FORD episode some kinda GM product will be advertised 🤷🏾‍♀️💁🏾‍♂️. I'm not hatin but I'm not a brand guy so I'm just speaking on what I always notice.

@lockonstratos7787 4 жыл бұрын

@@1tuffzx10 not really a Chevy elitist or anything but chevy did make the most muscle cars so I guess that's why they use mostly chevy cars. Tho I'd say chevy has paid them to use chevy stuff when they can

@1tuffzx10 4 жыл бұрын

@@bigboreracing356 personally I think they both did, but I'm not a brand fanboy so I give credit where credit is do💁🏾‍♂️

@calvindubois2230 4 жыл бұрын

He didn't trust her to get out of it he pushed her hand off 🤣🤣

@uh1c-chiefna996 4 жыл бұрын

The pope showed how.

@gregorycarter9352 4 жыл бұрын

I saw that.”Nooooo don’t blow it up.”

@MrJermbob 4 жыл бұрын

she looks like a stay in it type ;)

@calvindubois2230 4 жыл бұрын

OOFSPEC yeah lol

@Odessa45 4 жыл бұрын

@@uh1c-chiefna996 aaaaahahaha!!!!!!!! noice

@wesleycook3181 3 жыл бұрын

Look at that torque line. Wow. That’s a great engine right there.

@papergatorzfedducca7998 4 жыл бұрын

I love this video!! Will be binge watching some of your videos tonight!!!

@blainemeyer 4 жыл бұрын

PAPERGATORZ FEDDUCCA you should definitely download the app on your phone or Computer

@papergatorzfedducca7998 4 жыл бұрын

@@blainemeyer thanks I'm on it!!!💪💪💪

@kispie 4 жыл бұрын

More powah baby!

@ThaMetalMan Жыл бұрын

Dude, pats the man. These guys are legends

@someonesomewheresomdeday 4 жыл бұрын

I like how that rod rattled around when you sinched in the rod bolts....

@richardshippful 3 жыл бұрын

I noticed that no bearings?

@1badazz697 4 жыл бұрын

Well for my 1st ride the 351 is a Hell of a ride.

@JadXtreme 4 жыл бұрын

I wanna see this 6.0 vs 351 episode he mentioned at the beginning of the video!

@ja5435 3 жыл бұрын

This would be a perfect engine for my dad’s old 87’Dodge truck. My dad spent a little over 30 years in the military. And what messed me up was after I spent just about everything I have to get a new restoration job done the right way and on the way to pick the truck up the little 318 blew up. I’ll do and pay for your troubles.

@jaimecervantes3896 4 жыл бұрын

Y’all rock 🤙!

@nachos_70firebird66 4 жыл бұрын

I love how an intake manifold, aftermarket cylinder heads, and a Camshaft makes big power gains

@nachos_70firebird66 3 жыл бұрын

@Car Guy daddyo I have a chevy small block 400. Only has an Edelbrock Intake and a Demon 750 Double Pumper Carburetor. Hot Rod Magazine built a 400 with good power gains. Vortec Heads and aftermarket internals.

@brendanmccarthy492 2 жыл бұрын

Well he did go efi later in the video. And it's better than carb. Cus it's efi system is all in the throttle body itself which is awesome. No external computer needed. And is self tunable. Very easy to use. My dream build will be doing something like this. With that Holley sniper. Looks amazing

@nhragold1922 4 жыл бұрын

Finally some damn compression! That's a good motor! Should run like 7.40 7.30s in a dragster!

@high_on_nightmares 4 жыл бұрын

It would run low 7s in a door car. More like mid 6s in a dragster

@pjimmbojimmbo1990 4 жыл бұрын

It really would be nice one to see of these engines Raining Rods

@brandynstouffer9508 4 жыл бұрын

Would like tl see more ford based videos. I mean i know there are alot of chevy fans but not nearly enough ford videos for us ford guys

@ThomasShelby-uq8cz 3 жыл бұрын

Yeah well there is even less for us Mopar guys unfortunately. I understand Chevy sells the most and I like Chevy as well so it's all good to me

@1080sucks 4 жыл бұрын

When ya do it right ya have to pay the piper. If ya do it cheap you also pay the piper, a different one

@KingJT80 4 жыл бұрын

Youll be paying twice. Seems like a lot theae people in the comments dont understand why they use brand name parts made in America, not Chinese junk heads with shitty rocker geometry

@jaydenhopkins2988 4 жыл бұрын

Hell yeah tape measure on the belt

@lewisdeclouette6342 4 жыл бұрын

This yo get better and better especially with my lady friend next door that pulled on the dyno she is lovely

@TheAcworthdude 4 жыл бұрын

Would love to see a Propane fuel build .

@Pgcmoore 4 жыл бұрын

outstanding!!!

@Scubasteve22 2 жыл бұрын

It would be so fun to work at powernation. the first thing i would do is make pat set the timing to where it should be , right out of the gate... lol

@beefzerkee 4 жыл бұрын

*sees video* Big block chevy Windsor? *watches video* Oh that's what they meant

@Silverhaze78 4 жыл бұрын

Nice engine build. Time to upgrade that tin can caulking gun to a COX. No more struggle

@yeahitskimmel 4 жыл бұрын

Always wanna have that billet water pump with budget in mind

@buellb0y 4 жыл бұрын

Alright, that’s impressive! I would’ve gone with lower compression and forced induction. Maybe a big ass supercharger.

@brendanmccarthy492 2 жыл бұрын

10.1 would be ideal for a bbc under boost. Or nitrous. But than again.. it's their all the time.. you can't beat power as soon as you touch the throttle.

@ethanburnett4164 Жыл бұрын

Love you guys at power nation.!?

@soulsurfer8797 4 жыл бұрын

#1000Horses like a Boss! Pat you are the man!

@stevewall6811 3 жыл бұрын

“And since there’s truly no replacement for displacement” *laughs in turbo noises*

@FNU_SNU 4 жыл бұрын

I love big blocks but just over 1000 hp out of 632 cubic inches with over 15:1 compression just doesn´t seem all that good. 632 cubic inches is 10.35 liters. Modern n/a engines tend to be able to make in the neighborhood of 100 hp per liter without needing race gas.

@P71ScrewHead 4 жыл бұрын

That's what I'm saying, I've been wanting this engine for the longest but at $10-14k n can only be boosted to 5-15psi with its forged internals seems weak in my opinion.. A stock 5.0 Coyote with its forged crank from factory can handle 750-800hp boosted, costs just as much, but I like the n/a BBC 632ci better, I would like to know what it would do boosted at 15psi before buying it, I would hate to have to buy an LS engine, unless its the LS7 7.0L 505hp from factory, that's the only LS I like from the Corvette, thing gets 25-28mpg, that's huge for a 500hp motor..

@musclebone7875 4 жыл бұрын

Depends on how it's built. I know built right a 632 can make 1,000hp on pump gas. Scott Shafiroff has a 1,050hp 632 pump gas that he sales.

@nickwebb9937 4 жыл бұрын

YOYO MA will host that thing would easily push 2000

@subiemon 4 жыл бұрын

i'd like to see more builds that you put fuel injection on instead of carbs all the time!!!!!!!

@jamyers1971 4 жыл бұрын

Also, the Sniper is a good system, but that Stealth is shipping with a fuel rail that doesn't fit around the TPS. (Note how y'all hooked up the fuel lines?)

@ZeroBoostBuick 4 жыл бұрын

14.1:1 AFR is OK for drag racing, but it's not a good idea for an application where the engine is under load for long periods of time. The cylinders will keep getting hotter, thus causing pre-detonation. A richer ARF will keep the cylinder temp in check at WOT.

@fillup52 4 жыл бұрын

Y’all wild lol 1000hp Chevy and a Ford rebuild

@A_Man_Of_Culture_ 4 жыл бұрын

I sometimes like to dig a hole in my garden, climb inside and pretend to be a carrot. I am very lonely

@Dr.stein55 4 жыл бұрын

Im very lonely as well. I like to dig a hole in my yard and believe im a tiny tree so i feel you man

@crashcourseinbruhsurgery 4 жыл бұрын

Thank you, Man of Culture!

@jorgyr36 4 жыл бұрын

And 2 months later this comment has some real.. Real.. Meaning 🙄

@marksnider8914 3 жыл бұрын

Build hotrod.

@billebner9185 4 жыл бұрын

Pat needs more pockets for more pens, screwdrivers, flashlights, phones, glasses and whatever else he can cram in them. lol

@sparkplug1018 4 жыл бұрын

Someone show this to Cletus, 1000+ and all motor.

@basshead. 4 жыл бұрын

This engine makes 800hp at the wheels. Cleetus's engine makes 1000hp at the wheels(1200hp at the crank)

@juliennacer8871 3 жыл бұрын

@@basshead. Yeah but he uses boost. Lots of boost.

@johnriv6761 4 жыл бұрын

344 horsepower for a 8k budget....someone got completely screwed over

@elonmust7470 4 жыл бұрын

Big time!

@1tuffzx10 4 жыл бұрын

Did you watch the WHOLE video 🤨🤔, that it's a big block Chevy(632 ci).

@ronaldlewis6062 4 жыл бұрын

If you would have presented the Chev first I wouldn’t have watched the Ford ! Thanks for sharing your knowledge!

@Jenuin 4 жыл бұрын

Man I’d love to know how to build one of these. Hahaha 😂

@JerryDLTN 4 жыл бұрын

Cleetus McFarland recently had a 632 cid Blueprint engine in his Camaro "TOAST".

@djhaloeight 4 жыл бұрын

Jerry Lifsey yeah and he needed a supercharger to get it to 1000 hp? Got 1000hp here NA. I love ole Cleeter but their engine work/choices sometimes confuse me. They should’ve done some test rips and burnouts on Toast instead of barely getting it together and shipping it off to Australia. 🤷🏻‍♂️

@rp75heavy 4 жыл бұрын

It showed 632 , it picked up 3hp on EFI

@shawnriddle3018 4 жыл бұрын

how many miles can you expect from an engine like the high compression BBC you guys built?

@Cliff00936 4 жыл бұрын

Well we're down to one dude, I guess that means next month Johnny 5 will be in?

@kravmaga7070 3 жыл бұрын

ive heard alot of horror stories about these aftermarket efi systems. 1 way too expensive 2. the ecu cooks under the hot hood 3. after spending triple the cost of a carb , you definitely need a pro tuner to get the most out of it, if not to just get it running my last carbed truck, an 81 bronco ran quite well for a couple yrs even getting like 19 mpg. then something failed and i bought a new carb and installed it myself. i got it running in an afternoon with no special tools but i did have trouble getting it tuned as good as before as , mileage went down to only 14. but still even with cdn gas prices its gonna take a 100 fillups to get close to the price of these efi systems and labor to tune them.

@BlueMountainRacingEngines 4 жыл бұрын

Neat episode... but did you have to fire Amish Mike to pay for the 632?!

@richardoliver1303 3 жыл бұрын

The Nation is Waiting for Dyno of 632

@gregbolt5747 4 жыл бұрын

How much does this engine cost to build ? Can you post a list of the parts and where to buy them ? Thanks

@dstrong11 4 жыл бұрын

Pat needs more pens 🖊!

@justinballard7242 4 жыл бұрын

I'll sign a petition for it

@jorgyr36 4 жыл бұрын

More cow bell.. And more pens!

@brettmccafferty7510 4 жыл бұрын

Nice! Have you guys done anything with say a 05 Chevy Silverado with a 5.3?

@brettmccafferty7510 4 жыл бұрын

Oh ya. I didn't know there was such an engine as a "Chevy" 351.

@chaoszombie9995 4 жыл бұрын

Are they still doing these shows? Cause if they are I have one request! Maybe a V6?

@Jacksonkellyfreak 4 жыл бұрын

they've done a couple straight 6s

@Bricklinsv1970 4 жыл бұрын

Kick Ass background music.

@mikejf4377 4 жыл бұрын

How close can you get to 1000HP on any Chevy or GM power plant with pump gas? I have a friend that wants to do this for his truck.

@P71ScrewHead 4 жыл бұрын

PowerNation this is the episode I have been hoping y'all would upload in the longest, this is Season 6 episode 3 right?? Very misleading title tho, had you mentioned 632ci in the title I woulda watched it the time it was showed in tv, I recorded only the last 3 minutes of it n so now am happy to see it all, I too have a 351w that I would like to make a 427 stroker or bigger if possible..

@1tuffzx10 4 жыл бұрын

Bruh it's not a GM so they ain't gonna push anything as hard as they push GM products💁🏾‍♂️😔

@P71ScrewHead 4 жыл бұрын

@@1tuffzx10 are you referring to the 351w?? That engine can def handle some power..

@1tuffzx10 4 жыл бұрын

@@P71ScrewHead Yeah but we won't see it from Power Nation, ooooops I mean GM Nation. Ford is only a after thought on this channel 🤨

@P71ScrewHead 4 жыл бұрын

@@1tuffzx10I get what you're saying, yeah it seems they favor Chevy, but I've seen them build all 3 brands tho, thing is tho Ford sales like its gifted by God n doesn't need promoting, GM has forever been struggling even tho it has some great engines, also Dodge..lol

@1tuffzx10 4 жыл бұрын

@@P71ScrewHead I agree

@blackericdenice 4 жыл бұрын

No replacement for displacement? Old school thinking. 344 hp? Why didn’t you say what kind of cam you use?

@mikehaslett3738 4 жыл бұрын

F165 that was on the stock cam. It made 450 with the cam, likely a 280 degree comp unit or similar

@blackericdenice 4 жыл бұрын

@@mikehaslett3738 No that was not on the stock cam. Do you really think a stock 200 hp cam can make 344 hp without boost?

@gypana 4 жыл бұрын

There'll be no wear on the push rod cups because there was no push rods .

@whood338 4 жыл бұрын

It would be greatly apprecicated if he can make up his mind on wish windsor to build on a so called budget.

@TwentytenS4B8 3 жыл бұрын

9:31 That thing sounds seriously pissed off.

@jackgoin1496 4 жыл бұрын

Wonder what I have to do to build an engine with them.

@andrewstevenson5155 4 жыл бұрын

imagine doing a valve cover gasket and you take off your valve cover and theres just no push rods in there lmao

@williamsanders468 3 жыл бұрын

Does anyone know if those e3’s actually work? I mean come on a spark plug is a spark plug just make sure the spark plug is point towards where the fuel comes through so it ignites better

@Buses2Bikes 4 жыл бұрын

How much was the total cost ( $ ) of the 632 BB Engine in its current 1000HP configuration?

@lte008 3 жыл бұрын

All those decent parts and junk comp lifters. Why not some Morels, Iskys, or BAM?

@vollickplaysgames 4 жыл бұрын

budgets come in all sizes, so technically true....but come on LOL

@thomasshirley5046 4 жыл бұрын

Wow that was amazing! I want one 632 cu inch 1000 hp damn your good. I think that girl might have a crush on you lol. Id take her and the willis 4wd lol

@chloehennessey6813 3 жыл бұрын

Just because a woman or a girl smiles and talks to you doesn’t mean we have a crush or she has a crush. Are you ten? Lol

@unknown-6679 4 жыл бұрын

Ok Pat, ship that Rodent Chevy monster to my address immediately at no charge! It needs to be housed in my muscle car. :p

@bowtie-man 4 жыл бұрын

A s-10 would be a nice engine bay for the BBC's new home.✌✌

@gorillafunk725 2 жыл бұрын

1000 hp " budget" Hahahahaha. You guys should do stand up comedy. 😂

@KingJT80 Жыл бұрын

a conventional headed big block no custom parts.

@Bruhm-ms3yn 4 жыл бұрын

Yea

@michaelwintz1896 3 жыл бұрын

Budget doesn’t mean cheap it means a certain amount of money you can spend.

@MrRaffaro 4 жыл бұрын

Wait a minute stroke'n it would make it yelp ?

@starbattles1 4 жыл бұрын

I am doing a 1k hp budget build I promise blows yours away and comes in cheaper. The first half is a 500hp build for 5k. (already done with sound clip on my channel) The 2nd half still saving for but just $2500 and I'll turbo the motor and Viola.....1k hp for $7500. THAT is a budget built.

@Martin750hp 4 жыл бұрын

This thing would love some heavy nitrious and make even more HORSEPOWER!!!!!!!!!! That's the next video for this motor!!!!!!!!!!!

@Nmdixon-cu7vm 4 жыл бұрын

My man has enough pens in his pocket to write down Hillary Clinton’s hit list.

@Cliff00936 4 жыл бұрын

Well he doesn't have enough ink to write down all of Trumps lies.

@billybunt3716 4 жыл бұрын

@@Cliff00936 You're a special kind of stupid. Cliff is why you should stay in school kids.

@chaoszombie9995 4 жыл бұрын

Billy Bunt bruh... problem with trump is... he tweets too much.. like talking Tweeting too much makes you look bad!

@hualni 4 жыл бұрын

@@Cliff00936 Look out! Hillary has a White Knight defending her honor. This pathetic attempt at deflecting is an example of "Whataboutism". Get over yourself, Clit.

@billybunt3716 4 жыл бұрын

@@chaoszombie9995 You're right. He does tweet alot. But hes got more done than any other president in recent history. Like Ali said, who was a notorious talker... its not bragging if you can do it.

@robertrowe630 4 жыл бұрын

After doing all that and dyno testing put it in a street machine

@olderthanyoucali8512 4 жыл бұрын

Someone tell him every engine is bolted together! What is his background? What has he done for a living and for whom, how was he picked to host the show?

@bmstylee 4 жыл бұрын

Worked for the Summit Racing pro stock team. Probably forgot more than these keyboard engine builders on KZfaq ever knew.

@racerd3801 4 жыл бұрын

Where are the Emulsion tubes on that EFI system

@charlessmalling3743 4 жыл бұрын

Almost click bait. I thought "Wow 1000 HP Windsor?" Ah a 1000 HP Chevy big block...ok. Still fun to watch

@markmccarty9793 Жыл бұрын

To quote an old buddy, ain't nothing gonna live long on that much gas!!

@Mike383HK 4 жыл бұрын

I would love this job. You get to play with Other People's Money.

@C5Z06CarGuy 4 жыл бұрын

I hope that wasn't the actual cam install, cause it was dry as a bone.

@kyleboren7372 4 жыл бұрын

You don't need break-in lube for a roller cam...all you need is break-in lube on the cam bearings and to prime the oil pump before start-up and it's lubed properly and it's good to go...

@TheSmitty-js2rj 4 жыл бұрын

Pat can lose his pocket pens 10 times before he needs to grab a new one!

@MrCrystalcranium 4 жыл бұрын

I don't have any experience in doing any of this kind of work but I've watched hundreds of these builds...does that 1000 HP engine sound a little weird after initial throttle up? In almost sounds like it loses RPM. And no timing belt cover? Is that typical for this sort of build?

@stevenjones5121 2 жыл бұрын

632 is where it's at. I will duplicate this bullet and bracket race the shit out of it for 3 seasons before I have to tear it down. Dollars ahead.

@kyleboren7372 4 жыл бұрын

"Budget friendly" hahahahaha

@mr.marcosotero1509 2 жыл бұрын

I wouldn’t waste my money on a blue print block or anything from them! Do your research. Cheaper cost you more in the long run. That’s like building a house with a mud foundation.

@jamesmoore2007 4 жыл бұрын

Just my 2 cents, I prefer the fold info opposed to gm stuff.

@minibikemadman 4 жыл бұрын

Same 632 cleeter has in toast. I know that his is a tall deck tho.

@SamFBM 4 жыл бұрын

yet they seem to blow it up with a 1000 supercharged not n/a haha

@elonmust7470 4 жыл бұрын

@@SamFBM They do that kind of stuff on purpose for more views..

@justinballard7242 4 жыл бұрын

They're both tall decks

@InFiD3ViL1 4 жыл бұрын

@@elonmust7470 No man, they do not. That is a $14,000 engine just in long block form. Garrett and crew worked on getting Toast ready for over a year for SummerNats. They busted their asses to get this car ready for Australia. They had an unfortunate backfire on the dyno a few months ago which the engine unfortunately never recovered from. This was finally discovered once they were in the competition at SummerNats. Garrett is all about winning and competing. His views are generated naturally via amazing content and the fact that he and his crew are great people. He would never sacrifice a build like this just for the sake of views.

@elonmust7470 4 жыл бұрын

@@InFiD3ViL1 I'm talking about Cletus Mcfarland........ He breaks shit for views...